136,829 used machines on RESALE, but how to find them? Machine Search
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging Auction-ID: A1-51368-73
Due date 2024; diameter 355 mm; in original packaging; Auction-ID: A1-50707-263
Capacity height approx. 140 mm; Cutting length approx. 330 mm. Auction-ID: A1-50892-68
Brand: Daewoo Type: DAMTX520 Motor power: 1.45 kW Engine size: 52 cc Fuel: 2-stroke petrol Functions: brush cutter, grass trimmer, hedge trimmer and chainsaw Condition: unused, in the original packaging Auction-ID: A1-51368-283
turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 650 mm center height over bed: 140 mm centre distance: 650 mm bed width: 155 mm spindle taper: KK 4 CAMLOCK DIN 55029 spindle bore: 40 mm turning speed range - stepless: 4.000 U/min 4-jaw-chuck diameter: 140 mm quick change toolholder: MULTIFIX Typ A drive capacity - spindle motor: 7,5 kW taper in tailstock-quill: MK 2 dia. of quill: 30 mm quill stroke: 80 mm voltage: 400 V total power requirement: 7,5 kW weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,30 x 0,70 x 1,60 m - Serial-No.: C7D W13 02 - 3-axis digital display - Stepless speed adjustment - Digital speed display - MULTIFIX quick-change tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging Auction-ID: A1-51368-74
: 0330 mm : 210 mm : 1000 mm : 167 mm : 40 mm : 2,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Granulator ALPINA 800-150, suitable for secondary crushing. Technical data and equipment: • Drive power: 15 kW • Fully functional • With control • Optionally with blower and suction to the cyclone • Matching conveyor belt in stock After consultation, a test of the machine is possible. Condition: very good, used and fully functional.
used
Granulator AGRIFON 650 mm x 550 mm for crushing, for example of lumps. Technical data and equipment: • Year of construction: 2022 • Power: 22 kW • Open rotor • Grinder: 650 mm x 550 mm • With control • Unused machine • Spare parts such as sieve and knife can be supplied Condition: mint condition, used and fully functional.
Professional emulsifier cutter with cooking ROBOT-COUPE Robot Cook. Inventory condition: Refurbished. Brand: ROBOT-COUPE. Model: Robot Cook. Internal reference: RS01551. Product code: 43000R.Serial number: P5720208001. Professional equipment for emulsifying, crushing, mixing, chopping, kneading and making hot and cold preparations. Nominal electrical power: 1,800 W.Power supply: 230 V / 50-60 Hz / single-phase. Stainless steel tank with a total capacity of 3.7 litres. Useful reference capacity for liquid preparations: 2.5 litres. Adjustable heating temperature up to 140 °C. Variable speed from 100 to 3,500 rpm. Turbo speed: 4,500 rpm. R-Mix function with speed from 100 to 500 rpm. Equipped with removable scraper arm. Approximate external dimensions (W x D x H): 225 x 340 x 520 mm.Reference net weight: 14 kg.The technical characteristics correspond to the manufacturer's documentation for ...
Professional emulsifier cutter with cooking ROBOT-COUPE Robot Cook. Inventory condition: Refurbished. Brand: ROBOT-COUPE. Model: Robot Cook. Internal reference: RS01551. Product code: 43000R.Serial number: P5720208001. Professional equipment for emulsifying, crushing, mixing, chopping, kneading and making hot and cold preparations. Nominal electrical power: 1,800 W.Power supply: 230 V / 50-60 Hz / single-phase. Stainless steel tank with a total capacity of 3.7 litres. Useful reference capacity for liquid preparations: 2.5 litres. Adjustable heating temperature up to 140 °C. Variable speed from 100 to 3,500 rpm. Turbo speed: 4,500 rpm. R-Mix function with speed from 100 to 500 rpm. Equipped with a removable scraper arm. Includes serrated blade for blender function and smooth blade for cutter function according to original configuration. Approximate external dimensions (width x depth x he ...
Semi-automatic long-cut cold circular saw: - with mitre adjustment left 50°, right 60° - digital cutting angle display - feed speed hydraulically controllable - hydraulic workpiece clamping - 4 pcs replacement saw blades saw blade diameter 510 mm cutting diameter 150 mm cutting range at 90 degrees: flat 450 x 150 mm cutting range at 90 degrees: square 150 mm speed 29 / 58 m/min.total power requirement 4.2 kW weight 1.55 t dimensions L-W-H 1.8 x 1.7 x 1.7 mm Condition: functional Auction-ID: A7-51438-460
Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40333-112
Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Auction-ID: A1-40333-125
ROBOT-COUPE Blixer 5 V.V. professional blender cutter. Inventory status: Refurbished. Brand: ROBOT-COUPE. Model: Blixer 5 V.V. Internal reference: RS01044. Product code: 33266. Serial number: P8210139101. Professional equipment for crushing, mixing, homogenizing and emulsifying food. Tank capacity: 5.9 liters. Tank made of stainless steel. Approximate preparation capacity: from 3 to 20 portions of 200 g.Nominal electrical power: 1,500 W.Power supply: 230 V / 50-60 Hz / single-phase. Variable speed: 300 to 3,500 rpm. Professional asynchronous motor for intensive use. Equipped with hermetic lid and Blixer arm for homogenization of preparations. Stainless steel serrated blade with removable cap. Press and timer function according to model configuration. Approximate external dimensions (width x depth x height): 265 x 340 x 540 mm.Reference net weight: approximately 22 kg.The technical charac ...
French papers - Net binding - 1 season driven -15 knives - Knife distance: 65mm - bale width: 120cm - bale diameter: 90 - 180cm Auction-ID: A3-46111-16540
Brand: BARBIERI Type indicated on the plate: LEOPARD Year: 2024 Serial Number: 1400J0006748 Power: 7.4 kW, or about 10 hp, at 3,600 rpm Indicated weight: 210 kg Two wheels with agricultural tyres Rear cutter with protective guard Handlebar with controls and levers CE marking Auction-ID: A3-46111-35355
Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite
The inline Stephan Microcut MCH 20 is suitable for a wide range of applications in the food industry. It combines efficient mixing, fine cutting and emulsifying in one simple operation with minimum space requirement. Typical applications such as: emulstions, dressings, sauces, mayonaisse, ketchup, liquid products and pureed food. Previously used in a quark production factory. Rotor - stator principle. Efficient fine grinding. Perfect cut. Homogenous mixing. Stable emulsions. Constant product quality. In the microcut there is no metal-to-metal contact of the cutting elements. Capacity up to 1.200 kg per hour, depending on product and desired particle size. Motor: 15 kW - 400 V - 26 A - 2.925 rpm - 50 Hz., Type of Machine: Emulsifier, Capacity: up to 1.200 kg per hour, depending on product and desired particle size, Cutting system: Single, Motor: 15 kW - 400 V - 26 A - 2.925 rpm - 50 Hz, D ...
Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...
Offered for sale is a CNC cutting system for plasma and oxy-fuel cutting. Cutting area X/Y: 3100mm/16100mm. Cutting table overall dimensions X/Y: 3305mm/16220mm. Cutting height: 720mm. Number of extraction sections: 32. Extraction sections X/Y: 30mm/500mm and 2mm/550mm. Cutting support X/Y: Flat steel bars 80mm/5mm. Spacing between cutting supports: 75mm. Control system: Lincoln Electric BURNY 10 LCD PLUS CNC controller. Equipped with: 2 oxy-fuel torches, SAF NERTAJET 120 plasma cutting system, BEUTING cutting table type BT500-1IAK, sectional table fume extraction system, Donaldson TORIT DCE DFPRO 8-IP dust collector, 8 oval Ultra-Web FR filter cartridges, dust collection container with 50l capacity and radial fan with 11kW power. Extraction airflow: 6800m³/h at 3400Pa. Inspection possible by arrangement.
maximum number of results exceeded
please refine your search
100 € 
