tube cut used for sale

Cuts fillets into portions by weight, The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over., The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-ipm3-x300-portion-cutter/, Type: Portion cutter (fixed weight or fixed length), Products: Fish, chicken and meat fillets, Belt: Perforated, 280 mm wide, Scanner: Cameras with laser line, Controls: Control panel with colour screen, Electrical: 3 x 380–480 V, Construction: Stainless steel

Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors

Mobile oxy-fuel welding and cutting machine with two gas cylinders, pressure reducers, hose package and case with various torches and accessories. Auction-ID: A7-50868-110

Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206

Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50714-4312

Offered for sale is a programmable guillotine cutter with electronic control system. Technical specifications: Cutting length of the original material: 75-1000mm, cutting width of the original material: 180-1000mm, processable paper grammage: 40-173g/m², minimum sheet length: 40mm, minimum sheet width: 40mm, maximum stack height: 80mm. Control system: SEYPA-TV with electronic control panel and program selection buttons. Equipped with large work table, side tables, material stop, foot control and rear material support area. Inspection possible by arrangement.

Offered for sale is a paper sheeter with multiple unwind stands. Technical specifications: Cut length: 360-1800mm, sheet width: up to 1500mm, roll width: 360-1800mm, processable paper grammage: 40-173g/m², maximum number of parent rolls: 6, maximum roll diameter: 1000mm, maximum roll weight: 430kg plus 70kg for the winding shaft, core inner diameter: 70mm. Equipped with multiple unwind stands, two slitting knives, cross-cutting unit, web guide rollers, handwheels for mechanical adjustment, sheet transport system and delivery table. Inspection possible by arrangement.

Eurocutter TM 28 TKT - three knife trimmer year 2009 max. size uncut 440 x 310 mm max. size cut 420 x 300 mm min. cut size 80 x 80 mm max. stack height 100 mm Min. Stack Height 5 mm max. 28 cycles/min. compressed air 12 l/min. set of knives compressed air 12 l/min automatic format setting Weight 2,850 kg good condition in production

- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27

- Consisting of approximately: - 18 x complete sets with ISO 30 tool holder, collet and cutting tool. - 2 x ISO 30 tool holder with collet. - 8 x tweezers. - 14 x cutting tools. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-13

- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

MOBILE HORIZONTAL BORING MILL Inv. No. 11.583B1 Make GIDDINGS & LEWIS Model 230-5 Table 812.5 x 2,812.5 mm Spindle diameter 75 mm Taper MT 5 Horizontal spindle travel Longitudinal travel Cross travel Vertical travel headstock 2000 mm RPM kW Volts 400 Cycles 50 Hz Including: Digital read out Auction-ID: A1-50718-23

Year 2004; with two presses; load cells and 4 m stacker, the machine has worked very little; it can process cables from a minimum section of 0.0 to 25 M SQM to a maximum of 2.5 M SQM Auction-ID: A1-50513-131

Used ESAB CXL-DX 3500 plasma cutting machine (2016). Table suitable for large format sheets with a usable metal area of 12,000 mm (length) x 2,500 mm (width). Specified cutting capacity: 360 amps. A complete extraction system is included. Key details - Manufacturer: Esab - Model: CXL-DX 3500 - Year of construction: 2016 - Table/work surface: 12,000 x 2,500 mm (metal length x metal width) - 1 x Plasma Specified Cutting Current/Power: 360 Amps -1 x Autogen - Included: complete extraction system

Machine is equipped with: - chip conveyor - tailstock - foot pedals - tooling as showed in pictures Auction-ID: A1-50690-15

NC HORIZONTAL BORING MILL Inv. No. 13.033A1 Make SCHARMANN Model WF132AX Table 1,500 x 3,000 mm Spindle diameter 132 mm Taper ISO50 Longitudinal travel table 3.000 mm Cross travel 1,500 mm Vertical travel headstock 1.750 mm W-Axis 950 mm RPM 16 – 1,250 kW 30 Volts 380 Cycles 50 Auction-ID: A1-50718-38

used bread slicer Treif Diskus SB, overhauled, knife sharpened, weight 225 kg, year of construction 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP

Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price

Carousel milling machine Comec FGS-1T CAB Number of generators 1 Milling motor power: 5.5kw Cutter Speed: 7050rpm Tool min/max 120-200mm Spindle Diameter 40mm Maximum cutter height 115 mm Diameter of the processed material min/max 110-800mm Table Rotation Motor Power: 1.5KW Table speed 1.65-8.8 rpm Machine Dimensions 1600×1700×2600mm Machine Weight 1500kg Net price

Key data: 320 mm, 220 mm, 255 mm

Manufacturer: FANUC Model: Robocut Alpha-0iC A04B Year: 2006 Condition: Used Stock No: 9607 Control System: FANUC Series 180iS-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (+-): 120 mm Feed length in the V-axis (+-): 120 mm Maximum table load: 500 kg Machine weight: 2000 kg

Alfra VKS 125 cutting scissors with legs and gutters, various electrics Auction-ID: A1-50476-319

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38

- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-73

- Disc diameter 380 mm. - Table dimensions 1650 x 1030 mm. - Maximum cutting height approx. 120 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-45

Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37

Kinmatic 80-1A Percision Wire Cutter, M0.8 to M4, Manual Punching Machine with Digital Caliper Auction-ID: A1-50476-136

equipped with Hawa lever hand-held profile cutting device; table top; equipped with length stop; work table mounted on profile steel base; heavy plywood table top; equipped with base cabinet and drawer; including various electrical contents including power plugs; Auction-ID: A1-50476-255

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-303

Profile steel base; steel underblade; heavy plywood top; 2x drawer; including Hawa cable tray cutter lever manually equipped with length stop; 3x socket; fluorescent lighting; Auction-ID: A1-50476-262

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-302

Spiral rabbet (rebate) cutter for planer / jointer machines, reference 0940013ERP. Brand and dimensions are not stated in our catalogue. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-55

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-301

15-150 degree angle, adjustable guides, blade length 200mm Auction-ID: A1-50476-11

ROTOZIP RZ5 600 W multi-tool kit (ref. F012RZ05JA) for cutting tiles and other materials. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-57

Used veneer guillotine shear (veneer cutting machine) CAGLIO (Luigi Caglio, Italy), model TRC 3200, for cutting veneer sheets in a straight line with precision. It has a cutting length of 3200 mm, a hydraulically operated clamping beam that holds the veneer sheet during cutting, and a motorised back gauge (guide) for fast and accurate adjustment. The base, the blade carrier and the table are made of cast iron. Technical data: Maximum cutting length: 3200 mm Cutting height: 100 mm Hydraulic unit pump motor: 7.5 HP Hydraulic pressure, adjustable: 60 - 120 atm Weight: 3800 kg For more information and for the condition of the machine, please contact us. Auction-ID: A7-50988-126

\" Baykal BLE PRO 1530 CNC Fiber Laser Cutting Machine Manufacturer: Baykal Makina San. Tic. A.Ş. Model: BLE PRO 1530 Machine type: CNC Fiber Laser Cutting Machine Manufacturing date: 08/2020 Serial number: 26021 Laser source: nLIGHT Fiber Laser, 1 kW Cutting head: Precitec Laser classification: Class 4 Working hours: Approx. 250 h Enclosed industrial fiber laser cutting machine designed for precision sheet-metal cutting. Equipped with a 1 kW nLIGHT laser source and Precitec cutting head. Lantek CAD/CAM nesting software is included. Technical specifications: Laser output power: 1 kW Cutting table: 1,524 × 3,048 mm Nominal electrical power: 10.9 kW Electrical supply: 400 V / 50 Hz / 3-phase Air pressure: 6 bar Oil tank capacity: 60 L Dimensions (L × W × H): 9,000 × 2,300 × 2,200 mm Machine weight: 9,500 kg Included equipment: nLIGHT 1 kW fiber la ...

2000W Halogen Cutout Halogen lamp CP43 2000W Opening angle: 15 to 40° Connectors: PC16 IP22 Included: Filter holder, hook, sling. Auction-ID: A1-50934-304

This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75 and 7.5 lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details.

M. No.: 3269-007 Format (cm): 76 Equipment / Additional information: Side tables, air table, 1xreserve knife

Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-50796-283

BEVEL head - 5 axes, SIDEROS table with size 4000 x 6000 mm, SIDEROS external filter ECO16CT DISMANTLING AND TRANSFER TO STORAGE BY SEPTEMBER 2026 Auction-ID: A7-51034-5

Equipped with tow bar, weed brush, edger, Auction-ID: A1-47394-37

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50796-198

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50796-400

45 cm cutters. Ideal for cutting wires, ropes, cables and bolts. Auction-ID: A7-50796-298

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50796-117

Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/gasoline mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-50796-399