tube cut used for sale

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 700x530 mm, motor: 30 Kw (40 hp), year: 1998. Step rotor, vacuum cleaner: 1.5 Kw (2 hp) and silo: 2,000 L. With electrical panel.

Shredder mill with blades Brand: Prat, model: P-5, cutting chamber: 720x540 mm, motor: 30 Kw (40 hp). Stepped open rotor, electrical panel and vacuum cleaner: 7.5 Kw (10 hp).

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

Possible to efficiently cut steel up to 25 mm thick, even with heavy materials. A sharp and precise cut, without deformation or damage to the material. Supply voltage: 380 V Rated power: 19 kVA Rated current: 29 A Open circuit voltage: 280 V Output Current Setting: 30-120 A Rated output voltage: 128 V Maximum cutting thickness: 45 mm unused and in the original packaging

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Shredder mill with blades Brand: Prat, model: P-6, open rotor, cutting chamber: 800x600 mm. Hopper feed cyclone silo. Missing: motor, pulley, belts, hopper under material output, hopper closing bar with box, blades, opening, electrical panel. To repair.

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Shredder mill with blades Brand: Prat, model: P-6, open rotor, cutting chamber: 800x600 mm. Hydraulic opening piston, hopper. Missing: electrical panel, motor, pulley, belts, hopper for material output, blades. To repair.

Shredder mill with blades Make: Cumberland, open rotor, cutting chamber: 410x360 mm, motor: 10 hp

Unused, Hyundai MMA-160 welding machine 220V 20-160A, Powertherm XP45 plasma cutter 220V

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Shredder mill with blades brand: Trit, Model: TRIT-510, motor: 10 hp, new, cutting chamber: 330 x 250mm, with electrical panel.

Shredder mill with blades brand: Prat, cutting chamber: 370x260mm, with open rotor. Inclined cut, motor: 10 hp and electrical panel.

Cutting machine EBA 550 Year of construction 2007

Compressed Air Plasma Cutting Machine Maximum cutting thickness: 1-40 mm Current: 20-120 Amps Voltage: 310V Single-tube, full-bridge inverter technology, with sufficient output current for high-intensity operations, precisely preset cutting current + adjustable gas delay.

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Brotschneidemaschine verwendet. Sehr guter Zustand.

Shredder mill with blades Brand: Prat, model: P-4, cutting chamber: 600x420 mm, direct motor: 37 kw (50 hp). Open rotor, inclined cut. 980 rpm

Soriano brand crusher mill with blades, cutting chamber: 495x340 mm, motor: 7.5 Kw (10 hp). Step rotor, magnet in hopper. No electrical panel.

Cut length: 550 mm, Cutting height: 95 mm, 92 mm with press bar cover, Residual cut: 32 mm, 60 mm with press bar cover, Insertion depth: 570 mm, Compression: automatic compression, Press load: 200 – 1100 daN, Blade drive: hydraulic, Control: 7 inch touchpad, Connection values: 230 V / 50 Hz / 1.5 kW

Rego Herlitzius Rotec 350 circular knife bread slicer Type: Rotec 350 - Circular knife - Year of construction 2010 - Cutting width: 3 – 25mm - completely made of stainless steel - for breads max 3250mm length - on wheels - tested and cleaned External dimensions: 83x70x107cm (WxDxH)

Shredder mill with blades Brand: Prat, model: P-2, cutting chamber: 350x300 mm, motor: 11 Kw (15 hp), open rotor, soundproof hopper, year: 1990. With electrical panel and manual with safety certificate.

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

4000 x 2000mm 6000w with auto pallet changer

Center height: 315 mm Center width: 1000 mm Circulating Ø: 630 mm Spindle bore: 74 mm Spindle holder: Size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 7 - 710 rpm Feeds: longitudinal/flat 0.063-4/0.030-2 mm/rev Thread pitches: 1 - 14 mm electrical connection: 380 V kW Space requirement: 2750 x 1250 x 1380 mm Weight: approx. 4200 kg

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

Water-based head cutting, brand: Gamma Meccanica, type: TFD150, year: 1996. Centrifuge: 4 hp (3 kw).

SECOND-HAND DOUBLE SIDED CUTTING SAW BORING BERLE MOD. TB2000 -Volt. 380/50 - S/N 2401011 - CE rules

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Code: 0046 Brand: OMS Model: FC 300 RAP - CE Standard Crosscutting machine with suction base for cutting frames, furniture, window frames, Pvc, aluminium - CE Standard Technical data Blade diameter mm 300 Motor Watt 2800 three-phase - Rpm 3000 Swivelling head Base with suction unit Overall dimensions mm 500 x 400 x 1500 h Weight kg 80

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Copy milling machine - Copy longitudinal milling machine Functionally tested Incl. Tools

High-speed cutter with 72cm cutting width Hydraulic pressure infinitely adjustable Electrical connection 400V/50Hz

Standard high-speed cutter with 82cm cutting width Hydraulic pressure infinitely adjustable incl. 2 knives Electrical connection 400V/50Hz

Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Manufacturer: OMGA Type T55 300 Saw heigth: 75mm saw length 135mm Saw: ø300mm Saw spindle: ø30mm Motor: 1.2 kW Toerental 3000 tpm Dust extraction: 80mm incl. fan Condition: Full Functional

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested

1 MÜLLER label cut and fold machine type LCFR2, year 2017

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed