tube bending used for sale

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 € : 402.43 € : 40 to : 250 mm : 200 x 20 mm : 1100 x 620 mm : 55 mm : 4,7 - 9,1 mm/s : 45 mm/s : 45 l : 3 kW : 950 mm : 1250 mm : 900 mm : 1000 mm : 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111500 € : 2107.35 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommend ...

pressure: 135 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: DELEM feed down: 100 mm/sec feed bending: 10 mm/sec total power requirement: 15 kW weight of the machine ca.: 11.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...

Offer 26222 Technical data: - Pressure capacity 200 t - Working width 4100 mm - Passage between the uprights 3050 mm - Table width 220 mm - Projection 500 mm - Installation height 550 mm - Feed speed 80 mm/sec. - Working speed 0 to 7 mm/sec. - Retraction speed 70 mm/sec. - Plunger stroke 300 mm - Pneumatic connection - Drive 400 V / 18 kW - Space requirement approx. W 4800 x H 3150 x D 2200 mm - Weight approx. 17000 kg - with: - Swivel arm – control panel with control DELEM DA 65 Bj.2009 - Safety light barrier - Mot. Backgauge - Sharpening tool + universal die - Two-hand control panel with foot switch,

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 300 mm dayligth: 570 mm working feed: 21.0 mm/sec return speed: 200.0 mm/sec work height max.: 970 mm Control: PPS-TS Touch total power requirement: 37.0 kW weight: 27500 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Special price upon request Equipment: - CNC electro-hydraulic press brakes Intuitive, touchscreen-based user interface Easy navigation Tool and program library Control system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26235 Technical data: - Working width 4100 mm - Pressure capacity 170 t - Passage between the uprights 3600 mm - Projection 400 mm - Max. installation height approx. 400 mm - Plunger stroke 225 mm - Working height approx. 920 mm - Motor power approx. 18 kW - Oil filling approx. 300 l - Space requirement approx. W 4800 x H 2750 x D 2300 mm - Weight approx. 12500 kg - with: - Swivel arm – control panel with ESA control - for 4 axes Y1 + Y 2 , X , Z - Mot. Backgauge with mot. controlled height adjustment - Cambering - Safety – light barrier - 4-fold Univ. matrix + divided. Deer foot tool 4000 mm - Sharpening tool 4000 mm - Deer foot tool 3000 mm - V – Die 3000 mm - E.- Footswitch, - Support arms can be moved sideways

Max. bending capacity: 220 kN (22t) Tool height: 120 mm Weight: approx. 500 kg

Key data: 1020 mm, 1 mm

in good condition, wire inserts, rebate groove Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.0 mm Farbe/Colour grün Weight/Weight 250 kg Dimensions 1700 x 500 x 1160 mm Number of round rollers 3 pieces Roller diameter 65 mm

Offer 26697 Technical data: - Pressure capacity 320 t - Working width 3050 mm - Passage between the uprights 2550 mm - Projection 460 mm - Installation height approx. 630 mm - Plunger stroke 365 mm - Motor power approx. 37 kW - Space requirement approx. W 5700 x H 3250 x D 2450 mm - Weight approx. 17500 kg - with: - swivel arm – control panel with control - CYBELEC EVA-10S ; Y 1 + Y 2 ; X , R , Z - Mot. Backgauge - Mot. Crowning - Safety – light barrier - E. footswitch - 4-fold universal die split - V – Matrices - Split sharpening tool set, various other tools

Key data: 1030 mm

with wire inserts, conical rounds, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1030 mm Sheet thickness max. steel 0.6 mm Farbe/Colour grün Weight/Weight 220 kg Dimensions 1290 x 600 x 1050 mm Lower roller diameter 40 mm Top roller diameter 40 mm Number of round rollers 3 pieces Machine number 169

Key data: 1020 mm, 1 mm

used RAS 3-roll round bending machine, with wire inserts, seam groove, transmission gear, Adjustment of the rear roller from the front with scale, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 1020 mm Sheet thickness max. steel 1.25 mm Farbe/Colour grün Weight/Weight 150 kg Dimensions 1300 x 600 x 1100 mm Number of round rollers 3 pieces Roller diameter 56 mm Machine number: 316/10

4x Bending, Bunching, Cutting Equipmnet Comprising: Manual sheet metal guillotine Manual punching press Demurger ultra TR240SA (2001) and Serm cutting machines Auction-ID: A1-48805-221

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: kg

3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ------- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable ...

Die EVO ist die neueste Innovation in der Blechbearbeitung. Sie ist mit zahlreichen innovativen und patentierten Funktionen ausgestattet, die Ihre Produktionskapazität und Produktivität erhöhen, und weist gleichzeitig die niedrigsten Gesamtbetriebskosten auf. Die hochwertigen Komponenten, die bei dieser Maschine verwendet werden, sowie die neueste Version der BENDtronic®-Steuerung, welche serienmässig auf allen EVO-Maschinen installiert ist, sind besondere Highlights. Ab Lager verfügbar: HAEUSLER EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Hersteller: Haeusler Typ: EVO 31031 4-Walzen Rundbiegemaschine / Walzenbiegemaschine Ursprung: Deutschland / Schweiz Baujahr: 2024 Zustand: NEU, Austellungsmaschine Verfügbarkeit: sofort Leistung: Arbeitsbreite 3100 mm Rundbiegeleistung 14 mm Anbiegeleistung 12 mm Nicht die Passende Maschine? Als Vertreter von Haeusl ...

Key data: 80 t

IMPORTANT: If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes transport A high-precision and flexible 8-axis CNC press brake from the market leader Amada is being sold. The machine is in first-class, operational condition and has been professionally serviced on a regular basis. 8 controlled axes for complex bending sequences without time-consuming changeovers equipped with the latest AMNC 3i multi-touch control including extensive cabinet Press force: 80 tons / bending length: 2,500mm VHB on request - unrealistic offers will be ignored!

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5700 € : 110.01 € : 1550 mm : 1 mm : 68 mm : 1.5 kW : 2110 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending length: approx. 2100 mm Roller width: approx. 150 mm Reference: Zafa - Lot 15 Auction-ID: A7-49882-102

Ring diameter: 350 mm Ring thickness: approx. 100 mm with a larger batch of other different rings Attention: Machine can be transported on a standard truck Reference: Zafa - Lot 2 Auction-ID: A7-49882-95

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 200 mm dayligth: 425 mm throat: 300 mm working feed: 9.0 mm/sec return speed: 90.0 mm/sec work height max.: 980 mm back stop - adjustable: ca. 700 mm Control: PPS-TS Touch oil volume: 350 l total power requirement: 18.0 kW weight: 12.000 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized bac ...

pressure: 40.0 t chamfer lenght: 1250 mm distance between columns: 890 mm work stroke: 100 mm dayligth: 300 mm column arm: 200 mm table width: 140 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 90.0 mm/sec tank: 63.0 l total power requirement: 3.0 kW weight of the machine ca.: 2000 kg range L-W-H: 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) incl. digital display for gauge position movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator - 1x mobile control unit The ...

I - beam section - flat steel: 120 x 15 (d 750) mm I-beam section - upend: 60 x 10 (d 800) mm L-beam: 50 x 5 (d 1200) mm round material: 35.0 (d 800) mm bar material dia. max.: 70 x 2 (d 1200) mm square material: 50 x 40 x 3 mm bending speed: 4.3 m/min roll diam. toproll: 155 mm bore: 50,0 mm total power requirement: 1.5 kW weight: 320 kg range L-W-H: 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conform ...

pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...

Stierli bender 7.5 SBDGS L -Max. working pressure / press force: 75 kN = 7.5 t -Stroke length: 70 mm -Motor power: 0.75 kW - Frequency: 50 Hz -Voltage: 3~380V -Rated current: 2.1 A -Machine type: hydraulic horizontal bending/straightening machine -CE and GS marking -Tool/accessory scope: a total of 7 tool parts, tool markings: R1S, R5S, MW36S and MW60S and 3 additional tools -Documentation Dimensions: LxWxH 0.7x0.6x1.1 meters / Weight 180Kg

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

Key data: 2000 mm, 8 mm, 6 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...

4-roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

pressure: 56.0 t chamfer lenght: 1400 mm distance between columns: 1300 mm throat: 220 mm stroke: 200 mm dayligth: 485 mm work speed: 8.0 - 10.0 m/min return speed: 35.0 mm/sec Control: CNC Boschert back stop - adjustable: 0 - 370 mm work height max.: 915 mm Cylinders :: 2 Stück voltage: 3x 400 V connected load: 8.0 kVA weight: 3700 kg very good / well-maintained condition () with lots of bending tools - in checked conditions - machine video - https://www.youtube.com/watch?v=NrpZs6Ar0Vo Equipment: - NC electro-hydraulic press brake - BOSCHERT NC control unit, front - NC electro-motorized back stop (X axis) with 2x manually adjustable stop fingers (R+Z axis) - AMADA PROMECAM (SYSTEM A) upper tool holder - AMADA PROMECAM (SYSTEM A) lower tool holder - Handwheel with analog display for adjusting the bending angle - lots of insert tools, including tool cabinet - 1x working cylinder = dou ...

pressure: 400 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC ModEva 10 S total power requirement: 47 kW weight of the machine ca.: 30.400 kg dimensions of the machine ca.: 6000x3000x3450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1 Bending tools with excellent value for money Induction hardened, with ground working surfaces Standard lengths: 835 mm, 415 mm and 835 mm (split). For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener, Trumpf, Wila and many more The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

consisting of three rollers Working length: approx. 1500 mm Reference: STS - Lot 6 Auction-ID: A7-49882-247

Machine number: 4444 incl. foot switch Reference: Steinbach & Holler - Lot 54 Auction-ID: A7-49882-134

Roundo R4S 30 cm3 Dia rolls: 275 mm Dia of die mandrel: 105 mm Rotationspeed: 1 > 5 m/min Motorpower: 5,5 kW - 8,6 HP Length : 1250 mm Depth: 1250 mm Height: 1500 mm Weight: 3 ton

Flens-/kraalmachine voor de productie van drukvaten, silo´s, opslagtanks, tankwagens en spoorwegtankwagens. Max werkstukdiameter: 6 meter De flensmachine start het buigproces door de rand van het werkstuk netjes tussen twee mallen te plaatsen: één mal is bevestigd aan de bovenste reductiekast en de andere is vrijstaand aan de onderkant. Wanneer de bovenste spindel draait, start het draaiproces en wordt hydraulische cilinder nummer 3 omhoog bewogen. De randen van de gebogen uiteinden worden gebogen door de lineaire beweging van hydraulische cilinders 1 en 2. Dit proces wordt twee of meer keer herhaald totdat de gewenste waarden voor dikte, diepte en diameter zijn bereikt.

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...

pressure: 170 t chamfer lenght: 3170 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 620 mm stroke: 350 mm ajustment speed: 160 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec oil volume: 280 L 0: 300 bar controlled axis: 7 Anzahl Number of working hours: ca. 51.500 h total power requirement: 16.5 KW weight of the machine ca.: 12700 kg range L-W-H: 4550 x 2650 x 3150 mm LONG STROKE special version Excellent condition () Original price approx. 200.000 Euro Special price on request ---------------------------------------------- LONG STROKE electro-hydraulic press brake featuring: Increased daylight opening (installation height) = 620 mm Increased cylinder stroke = 350 mm ---------------------------------------------- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control AMNC - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) Swiveling control unit - front lef ...

: gebraucht : 9313B : prompt, Zwischenverkauf v : 1300 € : 1 : 4080 mm MINT CONDITION with manual crowning with single adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 9313A : prompt, Zwischenverkauf v : 2900 € : 1 : 4080 mm MINT CONDITION manual clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 080242 : prompt, Zwischenverkauf v : Italien : 1890 € : 1 Oberwerkzeug 1033/28°/R 0,6/8 mm 4 x 835mm Unterwerkzeug 3000/U 8 mm 3 x 835 mm + 1 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...

Druckplatten Biegeeinrichtung für Heidelberg SM52 Format - Plate Bending device Heidelberg SM52 Size Druckplatten Biegeeinrichtung - Plate Bending device NELA GS-Biegegerät Baujahr / Year 1997 - Serial-No. 1144/41 Druckplatten Biegeeinrichtung für Heidelberg SM52 Format Plate Bending device Heidelberg SM52 Size

Pipe bender - Power 3/8\" to 2\" pipe - Tools for 3/8\" - Incl. base frame see pictures Auction-ID: A7-50084-3

Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40

Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137

Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-50084-106

Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46

Used, untested. Including additional tools. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-3