tube bending used for sale

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 € : 530.98 € : 3030 mm : 4 mm : 4 mm : 2 mm : 180 mm : 4 kW : 4600 mm : 1120 mm : 1020 mm : 4250 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 € : 676.14 € : 3030 mm : 6 mm : 6 mm : 4 mm : 220 mm : 5.5 kW : 4750 mm : 1200 mm : 1150 mm : 4920 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 18 mm : 18 mm : 12.1 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double line ...

Tarzan, Working width 65mm, lever length 740mm. Auction-ID: A1-45188-218

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 kg Auction-ID: A7-45761-869

Press brake Amada Astro HDS 1030 / NTR BJ 2010

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 ...