tub used for sale

1 LAFER tubular knitt compactor type KST500, year 2009, working width 150 cm

Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...

Diagonal Fan, 230V, D350mm, 5000m³/h, EDR 36-0080.0658, MAICO, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, have never been used and are completely new. Diagonal fan, 230V, 960 watt, D350mm, 5000m³/h, Type EDR 36-0080.0658, MAICO, new Overall length 397mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and cour ...

Pipe grinding machine - self-made - Pipe grinding machine with CE marking - Suitable for grinding or surface pretreatment of various pipes - was used for galvanized steel pipes as a surface pre-treatment before painting - could be converted for other materials (other abrasive belts + possibly adjustments in the feeding system) - Control: Mitsubishi - Automatic feeding and ejection from the machine - Several pipes can be fed and ground one after the other and temporarily stored during ejection - Pipes are picked up by gripper and guided through the machine to the ejection - Incl. RL125 field extraction system for extracting the grinding dust - Compressed air is required for the function - Machine is sold without safety device - Year of construction 2011 Specifications - Min. tube diameter: 76 mm - Max. pipe diameter: 200 mm - Min. tube length: 3600 mm - Max. tube le ...

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

IWK TFS80-1/TZ204 tube filling line for processing tubes made of aluminium, PE, PP, PVC, PE laminate and aluminium laminate consisting of IWK TFS80-1 tube filling and closing machine for possible tube diameters 11 to 60.0 mm, total tube length from 60.0 to 285.0 mm, tube shell length (cylindrical length) from 50 to 250 mm, filling volume with corresponding dosing pumps from 1.0 to 400.0 ml, 26 tube holders, tube holder pitch 110.0 mm, tube orientation, pre- and post-gassing with nitrogen, double folding of aluminium tubes and hot air sealing for plastic tubes, Domino D Series CO2 laser coder for marking the tube fold with the variable data with DPX 1000 laser extraction system, electrical connection 3x400V/50Hz/3Ph, power 16.0 kW, machine net weight approx. 2400 kg, machine output up to 100 tubes/min., including IWK TZ 204 fully automatic tube feeder for cylindrical tubes, possible tube  ...

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

General SKU252X215 MakePharmatec LocationBarneveld CEcheck TypeRet P15680 Pressure Working pressure shell10 Bar Vacuum possible shellcheck Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel Heat exchangercheck Verticalcheck Heating surface±5m² Tube capacity67 l. U-typecheck Number of tubes:43 Tube diameter10 mm Tube length2000 mm Max. temperature200°C Shell capacity22 l. Shell diameter250 mm Shell length2100 mm Max. temperature200°C Shell connectionscheck Information No.12 1675 01 Year of construction2012 Floorspace0,75x0,75 m Total height2,2 m Weight240 kgShell and tube heat exchangersPharmatec GmbHHeat exchangers > Shell and tube heat exchangersBrand > Pharmatec GmbH What you c ...

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm   sheet thickness min.: 0.8 mm PRODUCT (PROFILE, TUBE)   external diameter min.: 24.9 mm   external diameter max.: 60 mm   wall thickness min.: 0.8 mm   wall thickness max.: 4 mm LINE CHARACTERISTICS   Forming Process: rollforming   welding process: HF inductive   sawing process: travelling system consisting of: - large coil reel - Bandschweisseinrichtung - optional: horizontal band loop - side planer - forming unit - HF welding unit - units for outside scarfing, inside scarfing - each without impeders, tooling - cooling section - calibration unit   with alternative calibration station for ovals, polygons - flying saw - chip blow unit - hexagon bundling- and binding unit optional roll-sets available for: forming section: 26,30, 32, 36, 38 ...

- Producer Cefla/Sorbini - Type Ecolight - Year of construction 1998 - Working width 1.300 mm - Working height 870 + - 20 mm - Max. part height ~ 70 mm - Number of lamp from top 1 Stk. - Lamp straight to conveyor 1 Stk. - For mercury lamps - For gallium lamps - Length cross bar conveyor - Cross-bar pitch ~ 95 mm - Feed speed adjustable 5 - 25 m/min - Length 1.500 mm + 500 mm - Voltage / HZ 400 /50 - Elektrischer Total connection 12,56 kW - Voltage fluctuation max. +/- 5 %

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage-Strip welding device-Side planer-Calibrating roll stand-Forming unit-HF welding unit THERMOTOOL-Unit for scraping without tools -Cooling section-Calibrating unit-Flying saw-Removal section for manual removal-Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm-Various accessories and machine-specific spare parts-Documentation and maintenance logs-CE declaration

• For aluminium tubes (double seam, triple seam) • 10 tube holder stations • Output 25 - 60 tubes/min • For tube diam. 11-52 mm depending on tube holder format set • Tube sheath length 50-250 mm • Total tube length with cap max. 280 mm • Dosing 2.0-400 ml depending on dosing pump • 2 rotary valve dosing pumps, 2-30 ml + 50-150 ml • 2 cam discs • 2 filling nozzles, diam. 12 + 19 mm with anti-drip device • Tube feeding magazine • Tube centring station • Print mark control (alignment of the tube to the print image) • Under-level filling • 1-line embossing, with embossing numbers • 1 heated hopper with electric heating, 1 single-walled hopper • 2 tube holder format sets for aluminium tubes (diam. x total length) 16.0 x 100 mm + 25.0 x 163 mm • Contactor control • Connection 400V/50Hz • Without transfer belt to the cartoning machine • Has worked in lin ...

PRODUCT (PROFILE, TUBE)   external diameter min.: 25 mm   external diameter max.: 76 mm   wall thickness min.: 0.7 mm   wall thickness max.: 3.25 mm LINE CHARACTERISTICS   welding process: HF inductive   sawing process: travelling   speed max.: 100 m/min ELECTRICAL SPECIFICATIONS   mains power supply: 680 kVA Technical data & highlights:System length: approx. 130 mStaff requirements: 6 employees for operationWelding process: High-frequency welding up to 400 kHzInduction welding process: Power up to 250 kWAdvantages:Robust and reliable design – suitable for continuous industrial operationPrecise welding quality thanks to state-of-the-art high-frequency technologyIdeal for manufacturing pipes in various dimensions-Pipe welding machine: Abbey Etna-Strip processing + saw VAi Seuthe-Rolling mill Carl We ...

This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine.

• For plastic tubes (HDPL, LLDPL) • Hot air sealing • 9 tube holder stations • Output max. 40 tubes/min • For tube diam. 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosing 20-220 ml depending on dosing pump • 1 rotary valve dosing pump 10-100 ml (1 additional as spare) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling device • Print mark control (alignment of the tube to the print image) • Embossing 1 line • 2 tube holder format sets: tube diam. 25 mm, tube length 90 mm, tube diam. 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labelling machine 05-0179

The CS-Matic 100 is offered with an accompanying feed belt (conveyor belt) Audion ACC2000/4, built in 2021. The machine is only electrically operated, no pneumatics, no compressed air necessary, the machine is very quiet in operation. Packaging capacity: up to 4200 packs per hour (depending on product size, package composition and film type) Speed of the conveyor belts: 10 - 30 m/min Maximum packing height: 200 mm Maximum packing width: 400 mm Maximum package weight: 30 kg Length of sealing: 500 mm Maximum size of film: 600 mm (centrally folded - ø 350 mm) Usable films (films): polyolefin (up to 30μ), polyethylene (from 15 to 80μ with optional sealing strip for PE) Size of the machine (L x W x H): 2170 x 1875 x 1665 mm Machine weight: 715 Kg Automatic adjustment of the center seal Automatic control of the weld bar height User-friendly LCD control panel, a 7" color touchs ...

Maximum product dimensions (width) 400 mm Maximum product dimensions (height) 240 mm Maximum product dimensions (length) ∞ Maximum coil dimensions (Ø x length) 350x700mm Infeed belt height 870 mm (with rollers) 830-910 mm (with feet) Machine dimensions (guards open) 2893x1340x1558 mm Machine dimensions (guards closed) 2893x1820x1980 mm Hourly production 3600 p/h The PRATIKA 56 MPS X2 is a servo-assisted automatic shrink wrapping machine, equipped as standard with the Side Seal device, a continuous sealing without length limitation as well as center sealing and fully electric operation. This machine, suitable for packaging formats up to 400 mm wide and 240 mm high, has been in all mechanical and electronic components to achieve a production rate of up to 3600 pieces per hour (depending on the product dimensions and the film). PRATIKA 56 MPS X2 thus represents a perfec ...

This TTM FL 600 3D Tube Cutting Machine was manufactured in 2007, featuring a powerful 4000-watt CO2 laser source and a versatile 3D cutting head. It accommodates round tubes from 100mm to 610mm and square tubes from 100x100mm to 400x400mm. With four chucks and loading lengths up to 14,000mm, its ideal for large-scale cutting tasks. Consider the opportunity to buy this efficient Tube Cutting Machine. Contact us for more information about this machine.

This BLM Adige LT8 4kW Co2 was manufactured in 2014. It features a Rofin DC035 3.5kw laser source and is equipped for tube cutting with a 3D cutting head. It handles materials up to 12mm thick and 206mm round, with lengths up to 6500mm. Consider the opportunity to buy this BLM Adige LT8 4kW Co2 tube cutting machine. Contact us for more information about this machine.

General SKU279X358 MakeAlfa Laval LocationBarneveld TypeIV Pressure Vacuum possiblecheck Working pressure shell6.5 Bar Vacuum possible shellcheck Working pressure tubes6.5 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface3 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface3 m2 Tube capacity16 l. Max. temperature130°C Shell connectionsDN40 Cover connectionsDN40 Information No.18892 Year of construction1991 Mounted on legscheck Floorspace0,80 x 0,65 m Total height1,50 mShell and tube heat exchangersAlfa LavalHeat exchangers > Shell and tube heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You a ...

This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine.

Stock number: F1057, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube filling machine, Construction: Manual, Chamber: 3300 ml., Filling head: Ø 28 mm.

Stock number: F679, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Stock number: F837, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tube sealer, Construction: For sealing of plastic tubes, Welding width: Max W 75 mm., Manufacturer: Arenco, Type: GAP, Other: Excl. traction station

Stock number: F893, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 3 pcs., Item: Tube filling machine, Chamber: 375 ml., Filling head: Ø 13 mm.

GT-5375 Cooling Vacuum Tub - Stainless steel - For 6 meter pipe for a maximum pipe of 400 mm diameter

The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste., Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends., Key Features:, - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway, - Adjustable fill heights and speeds to accommodate tubs from sma ...

For sale is a Rovema flow-wrapping machine for packaging coffee in the weight range 500 g to 1,000 g. The machine is fully functional and has an integrated aroma valve system for coffee bags with a freshness valve. Technical features: Suitable for 500–1,000 g of coffee Integrated valve system Robust, durable construction Ideal for pre-ground coffee or beans Extensive spare parts package included The machine comes from German quality production – solid, reliable technology ("good old workmanship"). A visit or demonstration is possible by arrangement.

This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards., Capacity : 5000 kg per hour , Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material , Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor , Protection: Fully enclosed cabin , Condition: Good , Available: Immediately

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.

CONTROLS   CNC controls SIEMENS TECHNICAL SPECIFICATION   Max. diameter of tube: 120 mm   Max. bending radius: 180 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8000 mm   space requirements -front/back-: 2600 mm   total height: 2300 mm   total weight approx.: 16500 kg machine in a very good condition Machine in very good condition Special features: - Free-form bending option - Laser scanner for securing the bending area - Foot pedal for safe start - Bending simulation Automation: - CNC control BEND MOTION CONTROL - Automatic mandrel lubrication as MMS Retrofit 2018: - Control system retrofit - Cables replaced - Bending head overhauled - Guides replaced - complete equipment (see photos) (Ø22x2, Ø28x2, & ...

RASI S80.6L - Tube bending machine Curve and mandrel bending of tubes and round profiles Coils of pipes incl. tools and documents Year of construction 2006 Technical data - Tube Ø x wall thickness: 82 x 2.6 mm - Max. resistance torque: 12.7 cm³ - Min. tube Ø: 4 mm - Outer bending radius: 228 mm - Inner bending radius: 34 mm - Min. bending radius: 1.5 x D - Max. bending angle (accuracy ± 0.1°): 195° - Bending speed return (programmable): 0 - 9.3 rpm - Bending speed advance (programmable): 0 - 6.6 rpm - Counter holder rail: rigid / running - Tooling: 1-, 2- or 3-groove - Bending direction: right - Feed speed (infinitely variable): 0 - 60 m/min - Push-back force of the feed: infinitely adjustable during bending - Twisting speed (infinitely variable): 0 - 60 rpm - Max. twist angle (± 0.1°): unlimited - Max. pipe clamping force: 8 t - Diameter bridging of a  ...

Used automatic line from Romaco for packaging products in PE or AL tubes. The line includes: 1. Automatic tube machine for PE or AL tubes from Romaco type U 20100. For the machine there are tooling for tubes with diameters : for plastic tubes: 16,19 shallow,19 deep, 25,30,35,50,50 shallow,50 deep for metal tubes: 13.5, 19 shallow, 19 deep, 25,30,35 2, Automatic cartoning machine from Romaco type Promatic P91 with a capacity of 90 pcs/min. The cardboard machine has a GUK leaflet folder type FA 21/4 and a date stamp for cartons. The weight of the cartoner is 2100 kg. Year of manufacture 2008. CE. Manufacturer's documentation.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-26

General SKU279X367 MakeSondex LocationBarneveld CEcheck TypeSonspy 1400 Pressure Working pressure shell16 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface18.87 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 (316L) Heat exchangercheck Horizontalcheck Heating surface18,87 m² Max. temperature200 °C Shell diameter1400 mm Max. temperature200 °C Information No.SP10096 Year of construction2014 Mounted on framecheck Floorspace2,20x2,40 m Total height1,60 m Weight5000 kg Extra SpecificationsSpiral heat exchangerShell and tube heat exchangersNew arrivalsSondexHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Sondex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- Y ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector -Manufacturer: Nilfisk, Bent End Plastic Tube Ø 40 VA unused OVP -Type: 107402631 -Diameter: Ø 45 mm -Number: 4x pipe available -Price: per piece -Dimension: Ø 48 x 320 mm -Weight: 0.1 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

UV dryer, UV lamp, high-performance UV lamp -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece

Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

YASKAWA MOTOMAN – Pipe Bending Machine with Robot General data: Manufacturer: Yaskawa Motoman Year of manufacture: 2015 Machine type: Robotic pipe bending system Number of axes: 6 Payload: 50 kg Controller type: Motoman JZRCR-YPP21-1 Weight: approx. 550 kg Technical details: Arm length: approx. 900 – 1000 mm Base dimensions: approx. 1000 x 1300 mm Control system: Yaskawa DX200 (4 kVA) Description: Industrial robotic system for pipe bending applications, equipped with a Yaskawa Motoman 6-axis robot. The system offers high precision, flexibility, and automation capabilities, making it suitable for complex bending operations in industrial production environments. Auction-ID: A7-45351-25

2x boxes; Blue tube for air and brake fluid Auction-ID: A7-44871-106

• Metal fuel tank • Serial number 002,012,1998 • Capacity 1575 liters • Level indicator • Standard UNE 62352 • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-89

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Offer 26085 Technical data: - Bending performance pipe at 45 kg / mm² to Ø 60 X 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - 8 bending tools - 1/2" R 46 mm, 25 R 56 mm, 30 R 67 mm, 3/4" R 56 mm - 1" R 67 mm , 1 1/4" R 100 mm , 11/2" R 130 mm , 2" R 150 mm