tub used for sale

General SKU309N517 LocationBarneveld MakeFalk Gmbh & Co KG Bendorf No.3301 Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm Information Year of construction2007 Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH) Catalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnim ...

General SKUR0854 MakeZürcher AG (CH) LocationBarneveld Type35 m2 Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface35 m2 Tube capacity164 ltr U-typecheck Number of tubes:122 Tube diameter16mm Tube lengthca 5400mm Wall thickness tubes1,0mm Max. temperature-30/200 degr.C Shell capacity206 ltr Shell diameter406mm Shell length3312mm Wall thickness shell4mm Max. temperature-30/200 degr. C Shell connectionsDN65 (2x), DN15 (1x) Cover connectionsDN100 (1x), dia. 100mm (1x) MaterialStainless steel 1.4404 Information No.1886 Year of construction2002 Mounted on legscheck Floorspace3,7x0,6 M Total height1,3 M Weight750 KGCatalysts & fillersShell and tube he ...

General SKUR0366 LocationBarneveld MakeBuss SMS TypeKondensator Pressure Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface41.5 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4541 (321) Heat exchangercheck Horizontalcheck Heating surface41,5 m2 Tube capacity175 ltr. U-typecheck Number of tubes:40 Tube diameter20x1,5mm Tube length16500mm Wall thickness tubes1,5 Max. temperature100 degr. C Shell capacity700 ltr. Shell diameterdia. 500mm Shell length4660mm Max. temperature200 degr. C Shell connectionsdia. 400mm (2x) Cover connectionsdia. 100mm (2x) Information No.22.11.6351/4 Year of construction1994 Mounted on legscheck Floorspace5,2x0,7 M Total height1,1 M Weight1200 KgCatalysts & fillersShell and tube ...

General SKUR0875 MakeApaco AG (CH) LocationBarneveld TypeAW300-2600/20-98 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16 m2 Tube capacity105 Ltr U-typecheck Tube length2500mm Max. temperature165 degr.C. Shell capacity140 Ltr Shell diameter323,9mm Shell length3200mm Wall thickness shell3,2mm Max. temperature5 / 165 degr.C. Shell connectionsDN200 (1x), DN80 (1), DN50 (2x) Cover connectionsDN 50 MaterialStainless steel 1.4435 (316L) Information No.503532/3 Year of construction1985 Floorspace0,6x0,6 M Total height3,4 M Weight420 KgCatalysts & fillersShell and tube heat exchangersFeed additivesPaper ...

General SKU212T508 MakeApparatebau AG LocationBarneveld TypeNachkondensator 260.13 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified body(TÜV) Heating surface8 m² Tube capacity222 Ltr. Max. temperature-10/200 °C Shell capacity68 Ltr. Shell diameter315 mm Shell length4000 mm Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) Information No.W6992 Year of construction2001 Floorspace4,5x0,3 m Total height0,5 m Weight330 kgCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySo ...

General SKU235P244 MakeBuss AG (CH) No.6821 Year of construction1985 Mounted on legscheck Pressure Vacuum possiblecheck Working pressure shell110 Bar Working pressure tubes10 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface2.6 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel, Stainless steel 1.4439 (317LMN) Heat exchangercheck Horizontalcheck Heating surface2.6 m2 Tube capacity20 Ltr Number of tubes:18x Tube diameter13mm Tube length3600mm Max. temperature200 Degr.C Shell capacity80 Ltr Shell diameterdia.200mm Shell length3600mm Max. temperature200 Degr.C Shell connections(3x)40mm Cover connections(2x)40mm Information LocationBarneveld Floorspace4,1x0,5 M Total height0,7M Weight500 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSol ...

General SKUR0880 LocationBarneveld MakeApaco AG (CH) TypeAW300-2000/20-98 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information No.503531/1 Year of construction1985 Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceutics ...

General SKU309N518 LocationBarneveld MakeEbner Anlagen und Aparate Germany No.062404700 Material Shell materialStainless steel 1.4462 (318LN) Cover materialStainless steel 1.4462 (318LN) Tube materialStainless steel 1.4462 (318LN) Pressure Vacuum possiblecheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface120 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface120 m2 Tube capacity820 Ltr Number of tubes:334 Tube diameter25,0mm Tube length5000mm Wall thickness tubes1,0mm Max. temperature10-100 gr.C, Shell capacity1600 Ltr Shell diameter750mm Shell length5000mm Wall thickness shell4,0mm Max. temperature10-120 gr.C Shell connectionsDN200, DN80, DN65, (2x) ...

General SKU309N516 LocationBarneveld MakeFalk Apparate- und Rohrleitungsbau gmbh&co KG No.3305 Material Shell materialMild steel Tube materialStainless steel 1.4462 (318LN) Pressure Working pressure shell4 Bar Working pressure tubes1 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface49 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodytuv Heating surface49 m2 Tube capacity262 ltr Number of tubes:76 Tube diameter25mm Tube length3900mm Wall thickness tubes2,0mm Max. temperature165 gr.C. Shell capacity503 ltr Shell diameter508mm Shell length4070mm Wall thickness shell6,3mm Max. temperature165 gr.C. Shell connectionsDN65, DN40 Cover connections(2x) DN100 Capacity3,9 m3 Information Year of construction2007 Mounted on legscheck Floorspace5,0x0,8 M Total height1,4 M Weig ...

General SKUR0885 MakeApaco AG (CH) LocationBarneveld TypeAW300-2600/20-98 Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface16 m2 Tube length2600mm Max. temperature165 degr.C. Shell diameter324mm Shell length3200mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 Information No.503532/2 Year of construction1985 Floorspace0,7x0,6 M Total height3,3 M Weight370 KGCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants ...

General SKUR0890 MakeLe Carbone AG (F) TypePolybloc NF610G LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphilor Surface16.3 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16.3 m2 Max. temperature165 degr. C Shell capacity80 ltr. Shell diameter660mm Shell length1380mm Max. temperature165 degr. C Shell connectionsDN150 (2x) Cover connectionsDN200 (2x) Capacity94,2 ltr. MaterialGraphite Graphilor XBS Information No.130261 Year of construction1990 Floorspace0,9x0,9 M Total height1,8 M Weight1300 KgCatalysts & fillersShell and tube heat exchangersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConf ...

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

STRIP WIDTH: MAX. 160 MM; THICKNESS RANGE: 0.5 - 3.0 MM, TUBE OD.: 12 - 50.8 MM, TUBE LENGTH: 3-6 M, TIG-TRICATHODE + LASER ROFIN SINAR 6 KW

Qty. 2 Second-hand stainless steel tube production lines Stainless steel tube mill plant for production of dia. 48.6 mm x 3 mm - 2 lines Brand: Hyundai Precision Type: Tig welding type (DC 600 A) Built: 1994 Revamped: 2020 Roll stand a reducer (changing of bearing ) New welder New heat treatment system for NO 1 mill only! New conveyor & packing system New bead grinder (wheel type) for No 1 mill New electrical panel Mill speed: 3.5- 4 m/min Product pipe: Stainless steel pipe Structural pipe (ASTM A312, JUST 3459, KS D3576 (205/pressure pipe) Strip Width: 152.6 mm (max 170 mm) Thickness: Max 3 mm Pipe dimensions: Dia.: 12.7 - 48.6 mm Length: 6,000 mm Coil weight Max 2 tons Tools: (8 sets) 12.7 ømm 15.8 ømm 21.7 ømm 22.2 ømm 28.6 ømm 34 ømm 42.7 ømm 48.6 ømm

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

Sartorius Stedim biotech BioWelder 16370 The BioWelder works with a thermal welding cycle that does not require laminar flow. In this welding process, the blade is kept sterile and endotoxin-free throughout the process. The inserted hoses are cut with a knife and then fused together by the device. The cycle process is fully automated and is only released after a full cycle. Various programmable holders make it possible to weld thermoplastic hoses of the same type (e.g. C-Flex, Sanipure, Pharmed) with diameters from 6.4 mm (1/4") to 19.0 mm (3/4"). Characteristics: Fully automatic operation Welds thermoplastic tubes up to 3/4 inch outer diameter Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure hoses True Thermal Weld offers exceptional strength Aseptic connection without laminar flow hood Data output by a print ...

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Bei Fragen: 01718367957

Capacity 85 beats / min.

- Guide tube MWM 12135199 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies an ...

For the gentle preservation of liquid foods with and without carbon dioxide in pre-filled bottles. Depending on the shape of the bottle, between 60-120l/h is possible, control to the desired product temperature or by means of a timer. ccbo2hk Gas spring-supported basin cover, full insulation, on castors with storage compartment, can be used in a wide variety of bottle shapes (milk bottles, beer bottles, preserving jars, etc.), dry-run protection, heat-up phase approx. 1h (20°-90°), standard with perforated metal base, heat holding time adjustable (0-99 min) Specifications: Water capacity ~115 l Weight 143 (= empty weight) kg Height 1 090 (= working height) mm Width 705 mm Length 1080 mm Electrical fuse 16 A Electrical connection 400V 50Hz (3 phases) Electrical power 9.15 kW Nominal capacity l/h up to 120 l/h

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz  ...

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Ref.Nr 00880 Name of the 3D FIBER laser tube cutting machine Manufacturer Bystronic TTM Model TTM FL170 Year of construction April2018 Laser Lessons 22630 h Options: System for 3D cutting 8500mm Pipe Payload - Rear Pipe single loader from the front 8500mm Condition Good condition Specifications: Smallest pipe length in automatic feeding 3100mm Largest pipe length in loading 8500mm Max. pipe weight 25kg/m Cross-sections Round, square, rectangular, oval, etc Dimensions round cross-section (min./max) 12mm 168mm Dimension square cross-section (min./max) 15x15mm 120x120mm Rectangular cross-section (min/max) All rectangles that fit into a circle of 168mm Travel distances laser cutting head Y = 375 mm Z = 390mm Max. linear speed of the mandrels 130m/min Speed of axis of the cutting head Y = 100 m /min Z = 100 m/min Rotary movement of the Mandrels M ...

High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 30 ro ...

4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Beer filler with KK

1 Alfa Laval UHT line An Alfa Laval indirect tube UHT system Year of construction 2000 Output 12,000 L7h Compactly positioned on 6 x 4 m" with: a.) Tube heating plant, on frame upright, laterally shielded by Mudguards, temperature up to 145 °C without sterile tank, with low overflow completely piped in the direction of the filling machine, with flow vessel for the return flow. b.) 1 Alfa Laval homogeniser 3 pistons, power as mentioned above. Pressure up to 210 bar. Works in the ascending temperature range around approx. 65 to 85 °C c.) 1 control cabinet with Siemens S 7 control and with complete cabling. The Alfa Laval UHT system is located on the production site in southern Germany and can be visited in the company together with me become.

Tube bundle heat exchangers Manufacturer: Orsymonde France Type: Tube bundle Year of construction: 2000 Serial number: 1.00.098 Carrier: Medium: Water Material: 1.4404 (V4A) Operating pressure: 3 bar Temperature: ambient temperature Test pressure: 6 bar Coat: Medium: Gas Material: 1.4404 (V4A) Operating pressure: 0.5 bar Temperature: ambient temperature Test pressure: 1 bar Dimensions: Length: 2.070 mm Width: 1.070 mm In very good condition!

DECKEL S11 Sharpener TECHNICAL FEATURES: Wheel diameter: 125 [mm] Workpiece Spindle Nose: ISO 40 Paper Filtration: No Supply voltage: 400 [V] Installed power: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 Universal Divider with Quick Indexing – Part Number: 255X0X x10 divider rings for fast indexing x1 tailstock with transverse adjustment – Ref.: 2621000 x1 tailstockwith vertical adjustment – Item No.: 2624000 x1 complete swivel bracket – Article No.: 2626000 x1 Grinding Unit (Concave or Convex) – Item No.: 2628000 x1 1 Universal Depth Gauge – Part Number: 2570000 x1 1 helical sharpening device – Article No.: 2580000 x1 draft grinding slide – Item no.: 2673000 x1 universal vise – Ref.: 2635000 x1 optoelectronic measuring unit with microscope – Part Number: 2650012 x2 RSF-Elektronik digital axis visualizatio ...

SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine  ...

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

5x vacuum tube lifter with column slewing crane 4m boom, 4m high, 80kg load capacity - used - : Price per piece, from location: 12.500.-€ (net), dismantled, packed and loaded! Manufacturer: Timmer Type: S5/SON Type: lightLIFT 50 kg Art.Nr.: S5-4000/SÄ4000/43-80SO Year of construction: 2023, rarely used Short description of the application Handling of cardboard boxes with a maximum of 40kg For Spax cardboard boxes Tube lifter lightLIFT 50 kg UST-LL-HE-140/50-2,5-FH lightLIFT lifting unit with fixed handle Handle length: 300 mm Lifting capacity: 50 kg Lifting hose: 140 mm Lifting hose length: 2,500 mm Electrical vacuum blower module medium inkt. Motor protection switches, engine protection and vibration dampers Weight: approx. 54 kg Vacuum Suction Hose Material: PVC Ø: 38 mm, length 15 m Colour: black for vacuum generators: SMALL, MEDIUM, LARGE and vacuum pu ...

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...

High-pressure tube fan made of aluminium, AD710mm, TDE 500 D4, Ruck, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. High-pressure tube fan, diagonal impeller ventilation fan, TDE 500 D4, Ruck, up to 9880m³/h, 3.3 KW, 400 V, do not operate without FIS! Aluminium design, AD 710mm, L730mm, incl. industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improve ...

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...

Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

tube diameter: . mm wall strength: . mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : 8,5 U/min : 120 mm roll diameter: 152 / 162 mm engine output: 1,1 kW connected load: 400/50 V/Hz hydraulic pump: 1,1 kW : 80 kN range L-W-H: 900 x 600 x 1000 mm weight: 470 kg Equipment / Accessories: - Three driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn used different profiles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pre-filter, intake air filter, air filter housing, air filter housing, alternator air filter, adapter tube -Manufacturer: Mann, adapter tube type 3900025327 -Size: from Ø 200 to Ø 150 mm -Total dimensions: Ø200/H105 mm -Weight: 0.6 kg

: 95 mm Shaft diameter: 30 mm Shaft revolutions: 7 U/min roll diameter: 132 mm Drive: 0,75 kW weight: 220 kg range L-W-H: 530x900x660 mm Equipment / Accessories: - Two driven rollers with grooved surface - Manual feed of the upper roller - working position horizontal and vertical (with tilting base) - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - The standard roller set is included. He can turn different profiles are used e.g. Flat iron, T-iron, solid material etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.