tub used for sale

Tube range up to: 48,3x3,25mm (E235mitRm =2xD) Bending radius up to: 125 mm Control: electronic ( + known 4-fold bending angle preselection ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 2380 / 800 / 1250 mm Weight: approx. 650 kg Electr. Power: 2.4 kW incl. sawing unit with visualization of the saw position via line laser Deburring unit, drive unit for assembly attachments Tube positioning - length and twisting 2-axis positioning indicator, premature mandrel retraction Auto. Mandrel lubrication (minimum quantities) Interface for network connection and data import

• 10-track for thermal foils, max. temperature 220°C • Intermittent operation • Output max. 45-50 cycles/min (450-500 sticks/min) • Volume dosing (10 dosing slides) for mini tablets/granules/powder free-flowing 250 -1500 mg/bag • Bag lengths adjustable 50-155 mm • Bag widths depending on format set, with format set for belt width per bag 46 mm, finished bag width 18 mm • Product suction via Piab Vacuum Conveyor • 10 hot-stamping units Schmucker PL 1B MB, single-line, 17 types • Cutting knife for tear notch • Horizontal knife • Ionisation unit Haug for ionisation product infeed • Dust extraction • Outfeed belt 10-lane, e.g. for connection to 10-track 100% checkweigher (see our item no. 10-0219) • Lateral conveyor belt for bad bags • Transport trolley for film reel • PLC Siemens S7-300 • Electr. connection 380V/50Hz

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect

Sputter target, tube, pipe -Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm -Number: 2x pipes available -Price: Complete -Incl. Transport box -Dimensions box: 3600/570/H585 mm -Weight: 306 kg

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 ...

Alu-Tube 160x10x1400mm for Cooling Cylinders in Printing Machines

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

Rofin StarCut Tube Fiber Stent Cutting System Used Year of construction : 2012 Lasers For cutting almost all metal alloys and plastic compounds commonly used in medical technology. Pictures will follow !

General SKU383U1044 LocationBarneveld MakeNabertherm TypeRS 170/750/13S H2 No.232933 Year of construction2012 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Max.temp.1300 °C Specified Features - Drying oven Drying ovencheck Vacuum drying ovencheck Max. temperature1300°C Number of compartments:1 Capacity±25 Ltr. Internal diameter115 mm Internal width2380 mm Electric heatingcheck Electric capacity13,5 kW, 400 volt Number of doors:1 With air circulationcheck With fancheck Suitable for nitrogencheck hydrogen With timercheck MaterialHeat-resistant stainless steel 1.4767, Glass Information Mounted on frameOn wheels With switchcheck Weight900 kg CEcheck Floorspace2,90x1,30 m Total height1,6 m Extra SpecificationsThe RS tube furnaces can be used for horizontal operation. This professional tube furnace can be optimally configured fo ...

TOTAL LOT ONLY. Stainless steel 321 seamless pipes/tubes. Brand: MAXIM Model: Seamless C.F. Tube 19.05MM x 1.63mm THK (MW) SA 213 TP-321 HEAT NO: A-98142 The tubes have a length of +- 5.5M each. Good for high pressure and heat.

TOTAL LOT ONLY. Stainless steel 321 seamless pipes/tubes. Brand: MAXIM Model: Seamless C.F. Tube 19.05MM x 1.63mm THK (MW) SA 213 TP-321 HEAT NO: A-98142 The tubes have a length of +- 5.5M each. Good for high pressure and heat.

- Working range pipe max. Ø 6 – 50 mm - Pipe extension length 3,000 mm - Electronic three-axis control - Incl. existing bending tool D20xR40/D40xR80/D40xR120/ D50xR110 - incl. prev. Mandrels 20x2 / 20x1 / 40x2 / 50x2 - Weight approx. 750 kg - L x W x H approx. 3,800 x 700 x 1,500 mm - Incl. instruction manual as PDF

Manufacturer: Tracto-Technik Type: Tubotron 50 Working range: Diameter 6 - 50 mm Pipe push-on length: 3000 mm Control: 3-axis electronic control Propulsion: Electro-hydraulic drive 3 kW Weight: 710 kg Dimensions (L x W x H): 3720 mm x 680 mm x 1495 mm

Working range tube Ø 4 - 28 mm x 3 mm for steel Working range pipe Ø 4 - 35 mm x 2 mm for non-ferrous metals Pipe push-on length 3,000 mm Electronic single-axis control / angle input Bending radius max. 90 mm Minimum quantities - mandrel lubrication incl. existing tool ( 17.2 x 2 / 21.3 x 2 / 25.0 x 2 / 26.9 x 3 mm ) Weight approx. 600 kg L x W x H approx. 3,800 x 600 x 1,100 mm

This TRUMPF TruLaser Tube 7000 Tube Laser Cutting Machine was manufactured in the year 2010 in Germany. It is equipped with a 3.6 kW TruFlow CO2 Laser. Check photo and video gallery for further details. Contact us anytime for more questions!

This TRUMPF TruLaser Tube 5000 Laser cutting machine was manufactured in 2010 in Germany and has 16681 laser hours (63477 Operating hours). Dispose of a Trutops (version: 17.0.0.161) used Software. This machine has these laser gas consumption (Purity): He (4.6): 13 l/h, CO2 (4.5): 1 l/h, N2 (5.0): 6 l/h.

This TRUMPF TruLaser Tube 5000 laser cutting machine was manufactured in 2016. Its equipped with a Co2 Laser Truflow 2000 offering high frequency excitation and a maintenance-free turboradial blower, enhancing operational reliability and efficiency. The laser features precision capabilities, such as a lens cutting head with a 155mm focal length and advanced control features like SINUMERIK 840D SL. The machines versatility is evident in its clamping jaw sets for various diameters and molded shells for different shapes, including round and rectangular tubes. The TRUMPF TruLaser Tube 5000 machine we have for sale is adept at providing high-quality cuts for diverse applications. Contact us for further details regarding this laser cutting machine.

General SKU214W272 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB45/300/SH/3SIC No.98087 Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface4.5 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface4,5m³ Tube capacity22 ltr Number of tubes:128 Tube diameter14 mm Tube length1000 mm Wall thickness tubes1,5 mm Max. temperature+150°C Shell capacity53 ltr Shell diameter300 mm Shell length850 mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150 2x Cover connectionsDN80 2x Information Total height0,42m Weight190kg Floorspace0,42x1,40m Technical specs E ...

Incl. extensive bending tool Tube range up to: 48.3x3.25mm (E235withRm =2xD) Pipe extension length 3,000 mm Bending radius up to: 125 mm Tube positioning : Length and twist manual incl. display in the touch panel Mandrel retraction : Premature, infinitely programmable Interface for network connection and data impot PIPEFAB Control: electronic ( 4-fold bending angle preselection / touch panel ) Bending angle maximum: 180° Bending speed: 20°/s Dimensions L / W / H: 3380 / 800 / 1250 mm Weight: approx. 700 kg Electr. Power: 2.4 kW without saw, without deburring unit, without pre-assembly, without MQL

- Tube diameter max. 42.4 mm - Pipe extension length max. 3,000 mm - Max. bending radius max. 150 mm - Right bending direction - Electronic 1-axis control - incl. pre-assembly device 6-42 mm / cutting ring attachment 1/4" – 1 1/2" - incl. deburring device 6-42 mm / external and internal deburring 1/4" - 1 1/2" - incl. chamfering device 20 – 60 mm - Incl. bending tool  12; 16; 20; 22; 25; 28; 30; 35 mm - L x W x H approx. 3,700 x 750 x 1,200 mm - Weight approx. 400 kg

General SKU214W276 LocationBarneveld MakeQVF Glasstechnik TypeROB32/150/SH/3/SIC Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell2 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface3.2 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface3,2 m2 Tube capacity10 Ltr. Number of tubes:37 Tube diameter14 mm Tube length1980 mm Max. temperature+150°C Shell capacity24 Ltr. Shell diameter124 mm Shell length2250 mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN100 (2x) Cover connectionsDN40: DN50 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Floorspace0,25 x 2,30m CEcheck Total height0,25 m Weight100 kg ATEX compatiblecheck Technical specs ...

This TRUMPF TruLaser Tube 5000 was manufactured in 2008. A robust laser cutting machine featuring a 2.7kw Co2 technology and semi-automatic tube loading. Located in Bosnia and Herzegovina and available immediately. Ideal for sheet metal applications. For more information about this laser cutting machine, please reach out to us.

General SKU169K559 LocationBarneveld Makeunknown Year of constructionunknown Material Shell materialStainless steel Cover materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface39.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger/Steam generator (1x) Heating surface39,5 M2 Number of tubes:168 Tube diameter25mm Tube length3000mm Shell capacityunknown Shell diameter1200mm Shell length2600mm Information Mounted on legscheck Floorspace4,0x1,5 M Total height2,5 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Neth ...

General SKU050C389 LocationBarneveld Makeunknown, manufacturer tag is missing Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU279M283 LocationBarneveld Makeonbekend, typeplaat ontbreekt Material Shell materialStainless steel Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface11,3 m2 Tube capacity±42 Ltr. U-typecheck Number of tubes:178 Tube diameter15mm Tube length1350mm Shell diameter325mm Shell length1450mm Shell connections1x dia. 65mm, 1x dia. 110mm, 1x dia. 45mm Cover connections2x dia. 60mm Information Floorspace2,0x0,65 M Total height0,65 M Weight250 KGShell and tube heat exchangers-Heat exchangers > Shell and tube heat exchangersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU214W270 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB71/300/SH/3/SIC No.98072a Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface7.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface7,1m² ( in use 4,2m²) Tube capacity40 Ltr. Number of tubes:97 Tube diameter14 mm Tube length1980 mm Wall thickness tubes1,5 mm Max. temperature+150°C Shell capacity113 Ltr. Shell diameter300mm Shell length1800mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN200 Cover connectionsDN50, DN80 MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information Total height0,42 m Weight280 kg Floorspace0 ...

General SKU214W271 LocationBarneveld MakeQVF Glasstechnik TypeS-ROB64/300/SH/2/SIC No.98075 Year of construction1998 Pressure Vacuum possiblecheck Working pressure shell1 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface6.4 m2 Specified Features - Shell and tube heat exchanger MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Heat exchangercheck Horizontalcheck Heating surface6,4m² Tube capacity33,7 Ltr. Number of tubes:164 Tube diameter14 Tube length±850 mm Wall thickness tubes1,5 Max. temperature+150°C Shell capacity46 Ltr. Shell diameter300mm Shell length850mm Max. temperature+150°C Shell with expansion jointcheck Shell connectionsDN150, DN50 Cover connectionsDN80 Information Total height0,42 m Weight190 kg Floorspace0,42x1,40 m Technical specs  ...

General SKU394U1150 LocationBarneveld MakeGAB Neumann TypeN-B-11.5/GMP No.16754-13691 Year of construction1990 Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell4 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Graphite Surface11.5 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Heating surface11,5 m² Tube capacity44 l Max. temperature-10°C / +180°C Shell capacity44 l Shell diameter705 mm Shell length1440 mm Max. temperature-10/+180°C Shell with expansion jointcheck Shell connectionsDia. 80 mm (2x) Cover connectionsDia. 200 mm, Dia. 100 mm Information Total height1,75 m Weight950 kg Floorspace0,85 x 0,85 mNew arrivalsShell and tube heat exchangersGab NeumannNew arrivalsHea ...

machine measurements: 3200x1700x2100 mm machine weight: -- kg power capacity: -- kW Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.  ...

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

description: Type: MAN 2876 LE302 gas engine for combined heat and power Power: 190kWe/1,500 rpm Standard scope of delivery â?¢ Rows â 6 cylinder four-stroke â gas engine based on MAN â D28 â?¢ Single cylinder heads, high-alloyed valve seat rings and valves, form-forged crankshaft with counterweights, wet cylinder sockets, piston cooling over oil spray nozzles â?¢ Compression ratio 11:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with multi-cyclone oil separator, engine ventilation must be integrated on the customer side â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2,412 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal & ...

Cooling tray type KW 1000-200-200 self-sufficient for strand cooling in the production of granules or filaments. - a mobile and height-adjustable base frame made of welded steel raw, left machine version, painted - Frame-height adjustment of the top edge of the water bath from 900 mm to 1050 mm - a VA cooling tray 1000x200x200mm - 2 pieces adjustable and mounted strand holder - clamped to water edge - 1 piece wiper bled for partial strand drying - 1 piece of adjustable tub plug for filling height adjustment - 1 piece of VA water tank (reservoir) as service water tank - 1 piece of bacon water pressure pump to supply the cooling tank with sufficient cooling water from the water tank - 1 piece of direct 1/2" fresh water connection via float switch and solenoid valve for connection to the customer's side Fresh water network - Tub overflow - drain pipe DN50 for connection to  ...

Center height: 0 mm Center distance: 4000 mm Spindle bore: 103 mm Make Mexpol TUB 830 C Type TUB 830 C Year 2008 Mexpol Tub 830 C lathe with Fanuc O-i Mate TC Centre height (mm) Swing bed= 830 Center distance (mm) wing sup = 585 Spindle bore DBC = 4.000 Bore = 103 CNC Fanuc O-i Mate TC Bed width = 520 mm 4 chuck 800 mm New Euro 100.000 !  

Steel drip tray, wheelchair accessible PAGUS 2510 x 1020 mm total height: 310 mm Tub length ( inside ): 2500 mm Tub width ( inside ): 100 mm Tub height ( inside ): 205 mm Collection volume: approx. 500 l 2x Grating: 1000 x 1000 x 35 mm 1x Grating: 1000 x 500 x 35 mm grid size: 30 x 30 mm used, tested ! Dimensions: 2510 x 1020 x 310 mm

TECHNICAL SPECIFICATIONS Manufacturer: SMT STICHWEH Description: Drainage bucket wheel Design: Cup wheel in the middle Type: ES 40 BB Year of construction: 1983 Tub length: 3,375 mm + plus spout 490 mm Tub height: 1,150 mm Tub width: 4,080 mm Transmission: Stiebel Parallel shaft gearbox 5042 Dimensions screen mat: 700 x 740 x 8 mm Weight: approx. 5,500 kg SPECIFIC COMMENT - 1 discharge conveyor available (AA= 10 m /BB= 650 mm) - No cracks, no deformations

Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Dough tub trolley NEW TW 14 "for the perfect long-term guidance" with 14 dough trays and lids 9.8 litre tub (max. 6 kgdough) Lid for special dough guidance /air guide Stainless steel car mobile

New machine 24-month warranty Benefits: + TOP value for money + robust hydraulic dough divider with rectangular stainless steel boiler frame + mobile machine + teflon-coated cutting & punching grille, easy to replace + food-safe plastic press segments + Stainless steel knife for splitting pieces of dough up to max. 19 kg dough insert, 20-piece division) + Artisan, traditional sharing and moulding of the dough possible + Punching grille: profiled POM plastic knife, food-safe, for excellent side closure of the dough + ideal for very soft doughs (baguettes, ciabatta, focaccia, root breads, corntip) + smooth and dust-proof motor + easy and quick to clean + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 2x Teflon grid (see PDF / grid catalogue) OR instead + 1x plastic grid (see PDF / grid catalogue) for dough-gentle punching ...

Roller width: 350 mm roll diameter: 110 mm Roller covering - soft rubber: 70 Grad shore rubber: NBR - Qualität air pressure: max. 4 bar Pressure line: 28 N / mm Capacity of dye tub: Becken - 1,3 Liter Capacity of dye tub: Zwickel - 0,3 Liter Speed driven roll: 0-25 U/min speed: 1 - 10 m/min voltage: 230 V / 50 Hz drive motor: 0,4 kW weight: 130 kg dimensions: 1050 x 800 x 810 mm • 2-roll-laboratory padder for horizontal and vertical roller-arrangement. • The change from horizontal to vertical of the roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough • with controllable motor drive, drive for both rolls. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 830 mm Turning length: 4000 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: O-i Mate TC Make Mexpol TUB 83 Type TUB 830 C x 4000 Year 2008 Fanuc O-i MATE TC Centre height (mm)Swing bed = 830 Center distance (mm)Support = 585 Spindle bore DBC = 4.000 Bore 103 / 15 kW Chip conveyor 2 x steady rest  

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Wolff Apparatebau KG blanching and cooling line consisting of: Van Wees mobile elevating belt: s/s frame, plastic belt with dividers, belt width: 175 mm, distance between dividers: 165 mm, divider height: 50 mm, elevating height: 2930 mm, total dimensions: 3300 mm x 1100 mm x 3000 mm, Wolff Apparatebau KG blanching machine, type: B950/3000, machine number: 93-962, year of construction: 1993, 380 V, 50 Hz, 6.5 kW, dimensions: 4650 mm x 1550 mm x 3050 mm Wolff Apparatebau KG cooling drum, type: TRK950/3000, machine number: 93-963, year of construction: 1993, 380 V, 50 Hz, 10 kW, dimensions: 4650 mm x 1500 mm x 2400 mm s/s filter tub with circulation pump, inside dimensions: 1000 mm x 1000 mm x 950 mm, dimensions filter tub: 1400 mm x 1000 mm x 1130 mm, s/s platform, dimensions: 4100 mm x 1800 mm x 1980 mm, 3000 mm x 1100 mm x 1980 mm, 2900 mm x 1800 mm x 1980 mm, s/s switch ca ...

Bucher MP 27 with the following accessories Double juice tub and pomace snail Juice tub with pump and level control. the following parts of the press were replaced in 2022: New press cloth and replacement cloth available. New drainage elements New drainage cores, split pins and discs New timers. Various new contactors in the control box as well as new installation of selector switch for drum rotation direction