ts 150 used for sale

Hydraulic module with diaphragm accumulator, safety and shut-off block, accumulator HYDAC SA10 M25 T 150 ( SA10M25T150 ) SB210 - 2.5A1 - 1 / 112 - 1 max 210 bar used ! Dimensions: 700 x 250 x 170 mm

Hydraulic tank with filter REXROTH approx. 150 l Dimensions tank: approx. 1000 x 700 x 520 mm with return filter HYDAC RFDBN/HC161 with stainless steel tub ! used,tested ! Dimensions: 1200 x 1000 x 850 mm

Clamping cylinders, hydraulic cylinders, double-acting WMW, HOHENSTEIN stroke: 150 mm rod diameter: Ø 56 mm among others as a spare part for Hohenstein RBT400 ! used ! Dimensions: 360 x 135 x 130 mm

Pneumatic cylinder, round cylinder MARTONAIR SM/840 stroke: 150 mm rod diameter: Ø 32 mm pmax: 10 bar /New ! Dimensions: 420 x 120 x 120 mm

BIG BAG truss for forklift operation PAGUS load capacity: 1500 kg Hook distance: 1000 x 1000 mm 2 forklift pockets: 150 x 80 mm, length: 1380 mm distance forklift pockets: 600 mm ( middle - center ) used, tested ! Dimensions( transport ): 1460 x 1380 x 330 mm

Grippers, drum gripper MEILLER FKL / SO load capacity: 150 kg Material: stainless steel ( 1.4301 ) Crane eye: Ø 65 mm, cross-section: 17 x 5 mm used, tested ! Dimensions: 610 x 200 x 1130 mm

Thread micrometer, threaded micrometer, threaded screw gauge with fine knife CARL ZEISS range: 100 - 150 mm M 0.6 - M 10 measuring tip M 0.4 - 0.6 missing ! with protective box used, tested ! Dimensions: 445 x 180 x 50 mm

Cup grinding wheels FAG N13001 150 x 80 x 20. A 130x64 2 pieces ! New ! Dimensions: 170 x 170 x 180 mm

Threaded micrometer, threaded micrometer FEINMESSZEUGFABRIK SUHL TGL15046/I Range: 125 - 150 mm 12 pairs M 1.25 - M 6 Accuracy: 0.01 mm in wooden box used, tested ! Dimensions: 340 x 190 x 35 mm

Tilt table, clamping table PAGUS Clamping surface: 200 x 150 mm Working height at 0° Tilt angle: 110 mm Tilt angle: -30°... 0°...+60° 3 Grooves Groove width: 16 / 24 mm Groove depth: 21 mm used, tested ! Dimensions: 200 x 230 x 110 mm

Flow indicator MLW URSAFLUX flange Ø 150 mm New ! Dimensions (packaging): 550 x 300 x 200 mm

Luenette, steady rest, setback, fixed PAGUS Inner diameter: Ø 150 mm Center height: 175 mm foot: 220 x 100 mm Counter pressure plate: 170 x 60 mm used, tested ! Dimensions: 480 x 120 x 440 mm

Broadband, 11 pieces AWUKO KP80E Grain 150 V1400 Width: 1400 mm Length: 3150 mm New ! Dimensions ( Box ): 1450 x 400 x 300 mm

Broadband, 10 pieces MIRKA JEPUFLEX Grain 150 44GA00115KD Width: 1110 mm Length: 2620 mm New ! Dimensions ( Box ): 1300 x 360 x 270 mm

Clamping plate, clamping table, drilling table, machine table, T-slot plate WMW / PAGUS Working area: 4000 x 1500 mm Working height: 800 mm 5 grooves groove width: 28 / 49 mm, groove depth: 52 mm pro groove 2x insertion opening for slot nuts, dimensions: 80 x 72 mm 4x bore: Ø 150 mm 12x bore: Ø 110 mm with 6 feet used, tested ! Dimensions: 4000 x 1500 x 800 mm

Temperature sensor WTW TFK 150 1m Connection cable New ! Dimensions: 200 x 100 x 20 mm

Magnetic drive centrifugal pump, chemical pump, centrifugal pump, water pump SONDERMANN PUMPEN + FILTER GmbH & Co. KG 150-32-10 Impeller diameter: Ø 73 Input: 1 ( inch, internal thread ) Output: 1/2 ( inch, male thread ) Material: PP, EPDM Motor: ATB RF0,09/2-71 0,12 kW 2750 rpm 220 / 380 V 3AC, 50 Hz New ! Dimensions: 280 x 110 x 155 mm

Dry-running pump, water pump, centrifugal pump GRUNDFOS TP 150-200/4 A-F-A-BAQE Q: 235 m3/h H: 16.4 m 16 bar motor: 15 kW 380 / 690 V suitable frequency converter Art. Item no. EL193 Dimensions: 1100 x 850 x 550 mm

Submersible pump, chemical pump, water pump, centrifugal pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET300 Article No.: 0T623X18 Material: PP Immersion depth: 285 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm Motor: 0,,0,75 kW 230 / 400V IP55 New ! Dimensions: 550 x 325 x 325 mm

Submersible pump, chemical pump, water pump, centrifugal pump SCHMITT CENTRIFUGAL PUMPS Type: T 150 ET500 Article No.: 0T625X3R Material: PP Immersion depth: 490 mm Pump base: Ø 280 mm Pump flange: Ø 325 mm Motor: 0,,0,75 kW 230 / 400V IP55 Dimensions: 750 x 325 x 325 mm

Centrifugal pump without motor, water pump, chemical pump KSB ETANORM - M 150-200 M1ACS Q: 302,00 m3/h H: 18.13 m n: 1459 rpm shaft diameter: Ø 32 mm material ( impeller ): cast bronze material ( pump housing ): cast iron ( IL 1040, GG-25 ) used, tested ! Dimensions: 640 x 570 x 710 mm

Centrifugal pump, water pump, food pump NAGEMA KSP 50/150-2,3 TGL 24792 Q = 10 m3/h P = 14 mWs (1.4 bar) motor: 1.4 KW 220 / 380 V with two additional pump wheels !' used, checked ! Dimensions 420 x 230 x 390 mm

Centrifugal pump, water pump, food pump NAGEMA KSP 50/150-2,3 TGL 24792 V: 10 m3/h P: 0.14 MPa (1.4 bar) motor: 2.05 KW 220 / 380 V with two additional pump wheels ! used, checked ! Dimensions 460 x 250 x 380 mm

Vice PAGUS jaw width: 150 mm jaw height: 100 mm wingspan: 200 mm used, tested ! Dimensions: 440 x 180 x 240 mm

Pressure gauge set MANOMETER PLANT KARL-MARX-STADT Pressure gauge 60 0 - 15 MPa (0 - 150 bar) TGL 8701 Case diameter: Ø 60 mm Pressure gauge set (2 pieces) ! New ! Dimensions(single pressure gauge): 60 x 60 x 65 mm

Vibrating feeder, sorting vibrator MEHAG 1 R Diameter: Ø 150 mm gutter width: 12 mm 220 V 40 VA approx. 0.4 m Connection cable used, tested ! Dimensions: 200 x 180 x 200 mm

Net hose, net protection hose, plastic net hose PAGUS FW 50 Yellow Stretch range: 25 - 50 mm Length weight: 40 grams per meter Length: approx. 150 m Material: Polyethylene cardboard core: Ø 70 mm, length: 315 mm New ! Dimensions ( packaging ): 420 x 320 x 400 mm

Safety sight glass, protective glass, sight glass AUER-SOG MAXOS® 8.51.067 DIN 7080-10 Diameter: Ø 150 mm Material thickness: 20 mm Material: Borosilicate New ! Dimensions (packaging): 155 x 155 x 25 mm

Butterfly valve, intermediate damper, flange housing, with hand lever XOMOX CRANE Series 7500 DN 150 PN 16 width: 56 mm bolt circle diameter (housing): Ø 240 mm, 8x threaded hole: M20 x 2,, 5 ( continuous ) material housing: EN-GJS-400-15 ( GGG40 ) material disc: Stainless steel ( 1.4408 ) Drive shaft: 17 x 17 mm, Shaft length: 19 mm Drive flange: Ø 55 / 92 mm, bolt circle diameter: Ø 70 mm, 4x bore: Ø 9.0 mm New ! Dimensions ( without hand lever ): 350 x 280 x 95 mm

Drill, high-frequency tool, high-frequency machine BOSCH 0 602 118 001 0.36 / 0.42 KW 200 / 265 V 150 / 200 Hz connection cable approx. 3.5 m used, tested ! untested ! Dimensions: 450 x 300 x 90 mm

Drilling machine, high-frequency tool, high-frequency machine BOSCH 0 602 102 001 0,16 / 0.2 KW 2300 / 3300 rpm 200 / 265 V 150 / 200 Hz connection cable approx. 2.8 m used, tested ! untested ! Dimensions: 350 x 200 x 70 mm

Needle roller bearing, needle ring with race INA AXK 150190 A inner diameter: Ø 150 mm outer diameter: Ø 190 mm height (needle ring): 5 mm height (raceway): 10 mm New ! Dimensions ( single bearing ): 190 x 190 x 15 mm Dimensions ( packaging ): 200 x 200 x 30 mm

Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Spout - approx. 20 cm Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam More then 300 machines new and second hand on our seema .de

Hydraulic power unit, test pump, with tank and transport trolley PAGUS pump: KRACHT KP 1/3 F10A K002KL2 Vg: 3 cm3/U maximum pressure pmax.: 280 bar nominal pressure pn.: 250 bar pressure at 900 rpm: 150 bar medium: mineral oil, Hydraulic oil engine: approx. 2.2 kW 990 rpm ( measured ) 220 / 380 V 3AC 50 Hz Tank: approx. 25 l drip tray: approx. 32 l ( approx. 50 % usable ) used, tested ! Dimensions: 1450 x 520 x 1150 mm

Hydraulic cylinders, double-acting HUNGER 118075 BOSCH no.: 1800014758 stroke: 150 mm rod diameter: Ø 60 mm rod internal thread: M10 x 1,5, Depth: 25 mm Hydraulic cylinder: Piston diameter: Ø 125 mm, Operating pressure: 180 bar fuel gas cylinder: Piston diameter: Ø 85 mm, Operating pressure: 25 bar Oxygen cylinder: Piston diameter: Ø 180 mm, operating pressure: 25 bar foot flange: Ø 166 mm, thickness: 24 mm bolt circle diameter: Ø 130 mm 4x Threaded hole: M12 x 1.75, continuous connections: 4x 1/2, 2x 1/4 ( inches ) New ! Dimensions: 1000 x 225 x 225 mm

Torque Transducer, Torque Sensor KISTLER Type 5413-1805 Art. -No.: 90370007 measuring range: 0 - 150 Nm connection cable: approx. 5.0 m, with plug square mount: 12.5 x 12.5 mm ( 1/2 inch ) with rotating measuring shaft used, tested ! Dimensions (without cable): 88 x 65 x 45 mm Dimensions (packaging): 250 x 250 x 60 mm

Shunt motor, three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated, slip-ring rotor, slip-ring rotor motor -Power: 6 - 9 kW -Speed: 150 - 1430 rpm -Shaft: Ø 45 mm -Construction: B3 -Protection class: IP 22 -Dimensions: 780/430/H420 mm -Weight: 163 kg

Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Retracted dimension: 450 mm -Measure extended: 600 mm -Attention stroke only: max. 150 mm -without control -Number: 7x lifting tables available -Price: per piece -Own weight: 700 kg/piece

Gear motor, electric motor, three-phase motor -Speed: 150/225 rpm -Power: 0.12/0.2 kW -Brake: 24 V -Construction: B5 -Shaft diameter: Ø 15 mm -Protection class: IP 44 -Weight: 10 kg

Gear motor, electric motor -Speed: 150 rpm -Power: 0.1 kW -Construction: B3 -Diameter shaft: Ø 10 mm -Protection class: IP 65 -Weight: 4 kg

Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.9 kw type DA12/2 -Output: 100 V 150 Hz type 10DW12/4 -Power: 10 KVA -for edgebander, edgebander -Dimensions: 800/400/H320 mm -Weight: 180 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit: with hydraulic reservoir -Hydraulic pump: pressure up to 150 bar, unfortunately without type designation -Flow rate: 12 l/min -Motor: VEM 4.0 kW / 1430 rpm -Hydraulic tank: -Individual components: see photos -Dimensions: 500/480/H700 mm -Weight: 106 kg

Column slewing crane, indoor crane, workplace crane -Manufacturer: Vetter, pillar slewing crane type M capacity 1500 kg -Base plate: Ø 695 mm - Projection: 5,140 mm -Total height: 5,605 mm -Hook height: 4,320 mm -Chain hoist: GIS 150/F -Main lift: 4 m/min -Fine stroke: 1 m/min -Chain length: 4900mm -Transport dimensions: 5420/1230/H1950 mm -Own weight: 1320 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit with hydraulic tank -Hydraulic pump: Type 30447 pressure up to 150 bar -Flow rate: 12 l/min -Motor: ABB M2AA100 LB-4 3.0 kW / 1430 rpm -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 640/400/H725 mm -Weight: 167 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 190mm -Number: 1x vices available -Price per piece -Dimensions: 485/210/H190 mm -Weight: 26 kg

Vise, bench vise, locksmith vise, parallel vise, heavy duty vise -Parallel vice: jaw width 150 x 30 mm -Wingspan: 240mm -Dimensions: 490/325/H200 mm -Weight: 26 kg/pc.

Gear motor, electric motor, three-phase motor -Manufacturer: Weg, gear motor type ODGB 512/265 -Speed: approx. 150 rpm -Power: 0.13kw -Construction: B3 angle -Shaft: Ø 15x20 / 14x15 mm -Dimensions: 265/140/H120 mm -Weight: 4.7 kg

cardan shaft, cardan shaft, cardan shaft -Cardan shaft: with length compensation and double joint on both sides, heavy-duty version -PTO shaft: Size 151 -Lz.: 1500/150/8-14 -Flange: pitch circle Ø 155 x 14 mm -Number: 2x cardan shaft available -Price: piece -Total dimensions: Ø 180 x 1500 mm -Weight: 50 kg/pc.

Gear motor, electric motor, electric gear motor -Motor: FIMEA type LR 63B4 -Gearbox: 150 rpm, with oil level indicator -Power: 0.18 kW -Voltage: 220/380 volts -Hollow shaft: Ø 19/80 mm -Protection class: IP54 -Dimensions: 165/140/H320 mm -Weight: 7.4 kg