ts 150 used for sale

Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg

Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-B-SP-150 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Roller conveyor, roller track, roller track -Roller width: 595 mm -Conveyor length: 1500 mm -Roller diameter: 20 mm -Roller conveyor height: 280 mm -Dimensions: 1500/760/H280 mm -Weight: 44.5 kg

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-B-SPH-150 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg

- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg

Repair and Exchange service Repair and replacement service SERVICE Part: Spindle Controller Repair Type MDS-C1-SP-150 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-C1-SPH-150 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair service Reparatur Service Part: Axle amplifier type MDS-B-V1-150 Servo Drive For MAZAK MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Deliver ...

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece

Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 150 mm adjustable -Admission: -Dimensions: 250/130/H155 mm -Weight: 12.6 kg

Kemper Spiral Kneader Type: SP 150 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 2 stainless steel boilers Automatic feeding of the vats Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 150 mm -Width: 25 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 1 kg

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 143 mm -Width: 25 mm -Number: 1x discs available -Price: per piece -Weight: 0.9 kg

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

proximity switch -Manufacturer: Festo -Product Type: 150 857 U613 -Number: 3x switches available -Price/Sale: complete -Weight: 0.01 kg/piece

The blower stage is completely overhauled and can also be offered as a complete unit.

-Planetary Mixer Manufacturer: Wodschow & Co Denmark -Type: R 150 -without boiler and without tools

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch unused Ovp -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece

Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg

Used pipetting robot Tecan EVO 150 with Tecan dongle and CDs and accessories .

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Promess KA-EMF20/150 Servo Press 20 KN Manufacturer: Promess Type: KA-EMF20/150 Type: Servo Press KN: 20 Item Condition: New Calibrated: Yes Strain gauge amplifier: BA 62601 More servo presses new and used - you can find them in our shop! International shipping costs on request!

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: center height 110 mm -Dimensions: see the drawing in the photos -Number: 2x tailstock available -Price per piece -Dimensions: 130/100/H160 mm -Weight: 2.7 kg/pc.

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt, slat belt -Conveyor belt: link belt stainless steel -Width: 150mm -Length: 11500mm -Number: 2x available -Price per piece -Transport dimension: 420/400/H150 mm -Weight: 47 kg/pc.

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: center height 150 mm -Dimensions: see the drawing in the photos -Dimensions: 180/170/H175 mm -Weight: 5.3 kg

Depth gauge, dial gauge, depth gauge, depth caliper, caliper, caliper, depth micrometer, depth screw -Depth measuring screw: Depth micrometer measuring range: 0-150 mm -Reading accuracy: 0.01 mm -Fine-tuning -Box dimensions: 260/155/H35 mm -Weight: 0.8 kg

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

Mixer for granules and powdered products Mixomat. Completely in stainless steel. Mixing tanks on load cells. Tegiloxane pump. Vacuum pump AZO 5.5 kW. Granulate gate valve NW 100.

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

FLUIDISED BED Drier/ Cooler BUHLER OTW 150, with a complete peripherical ( see description) in very good condition, was stored for years and NOT USED Suitable for pellets, cereal flakes, extrudates...many other types of materials.or products.. Come along with it : 2 fans, a very nice cyclone , a steam battery to pulse hot air, pipes... Can be used according to alternative ways : whether to dry out materials.. or to cool, a simple inversion of hot or cool air has to be choosen More pictures available, great money spares compared to a new one... Can be shipped to any destination

BUHLER OTW 150 fluidized bed dryer/cooler, with a complete device (see description) in very good condition, has been stored for years and NOT USED Suitable for pellets, cereal flakes, extrudates... many other types of materials. or products. Sold with: 2 fans, a very nice cyclone, a steam battery to pulse hot air, hoses... Can be used in alternative methods: whether for drying materials. or to cool, you have to choose a simple inversion of hot or cold air More photos available, a lot of spare money compared to a new one... Can be shipped to any destination

Compressed air filters, fine filters, filters, flange filters, compressed air microfilters -Manufacturer: Domnick Hunter, compressed air filter -Type: unfortunately no exact type designation -Dimensions: see photos -Dimensions: 270/150/H495 mm -Weight: 7 kg

Vacuum ointment mixer, used Manufacturer : Olsa Type : MPEF 150 Volume : 150 ltr. Material : Areas in contact with the product in stainless steel