ts 150 used for sale

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Cold storage tank 150HL Vertical cylindrical stainless steel vessel. Located out doors with external cladding and insulation finished in riveted stainless steel . Fitted with cooling jackets. Mounted on 4 stainless steel legs with adjustable feet Approx dimensions : Overall height 5000mm Overall diameter 2000mm Legs 800mm Capacity 150HL Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

Dematic conveyor system Accumulating roller 15000-750-690 RA2458 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 15000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation slot size: 750 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.35 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side gui ...

Key data: 2000 kN, 291 g/PS, 45 mm

1.0 St. gebr. Rotary Table Injection Molding Machine Manufacturer: ARBURG Type: 1500T2000-800 Year of Make: 2012 Clamping force: 200 tons Rotary table; 2 x 180° Screws DN: 45 mm Max. displacement: 313 cm³ Moulded part weight: 291 g/hp Control: SELGOCIA Equipment: 1 x Core Pulls

General SKU235X167 LocationBarneveld CEcheck MakeBertoli Type150 NLB HA 33037 Pressure Working pressure250 Bar Main Features Capacity3100 Ltr./Hr. Motor37.5 KW Pressure250 Bar Specified Features - Piston homogeniser MaterialStainless steel 1.4462 (Duplex2205), Stainless steel 1.4542 (17-4 PH) Piston homogenisercheck Capacity3,1 m³/h Twin stagecheck Number of pistons:3 Piston diameter40 mm Piston stroke76.2 mm Piston stroke volume0,38l InletDN50 OutletDN50 Motor37,5 kW, 400 volt, With pumpcheck Capacity3000 l/h Motor2,2 kW, 400 volt, 220 rpm Information No.4979 Year of construction2022 With switchgearcheck Floorspace1,55x1,60 m Total height1,20 m Weight1300 kgPiston homogenisersBertoliMills > Piston homogenisersBrand > Bertoli What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to ...

NAN-JHIEH NJ-150VM EPS/EPE styrofoam moulding machine was built in 2008 in Taiwan by NAN-JHIEH ENTERPRISES CO. LTD. The machine is designed for the efficient production of various types of polystyrene parts, such as coffers, stucco, packaging inserts and food containers (lunchbox, thermobox, menubox etc.). The polystyrene is processed by means of special moulds that give the component the desired shape. These moulds are interchangeable so the machine can be adapted to different production profiles. A press force of up to 35 tonnes, combined with an extremely rigid design, ensure the achievement of high repeatability and quality of the components produced. The NAN-JHIEH NJ-150VM polystyrene moulding machine is currently configured for the production of expanded polystyrene (EPS) building blocks. Polystyrene building blocks are used in the building industry as lost formwork. Once a wall ...

pressure: 150 t throat: 400 mm stroke: 400 mm dayligth: 600 mm table surface area: 1000 x 600 mm Control: Siemens S7 hole in the table: 0 mm table height over floor: mm ram surface: 1000 x 600 mm working feed: 5 - 15 mm/sec speed down: 130 mm/sek speed up: 180 mm/sek power requirement: 18 kW weight of the machine ca.: 12,0 t dimensions: 2,4 x 1,9 x 3,5 m Single-column press with - Hardened and chrome-plated cylinder - Main cylinder diameter 270 mm - Auxiliary cylinder diameter 70 mm - Bosch Rextroth pump, valves, and filters - Hydraulic overload valve - Hydraulic proportional valve - Siemens touchscreen control panel with remote maintenance access Settings for stroke, pressure, speed, and dwell time - Category 4 sensors and photoelectric sensor - Two-hand control panel with reset and emergency stop buttons - CE marking The data for this ad was created with ModulMWS - the software solu ...

This 3-axis Eumach LBM-1500 vertical machining center was manufactured in 2016. Consider the opportunity to buy this Eumach LBM-1500 vertical machining center if you are looking to get high-quality milling capabilities. Contact us for more information.

This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information.

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

This Paul Reinhardt K34G / 1500 panel saw was manufactured in 1995. It features a multi-blade saw with a feeding and stacking system, ideal for efficient panel cutting operations. Contact us for more information.

This 5-axis INTOREX TKC-1500 CNC Wood Machining Centre was manufactured in 2025. It features a high-performance electrospindle with a 7.5 kW motor, achieving speeds up to 22,000 rpm. The machine includes a rotary tool magazine with 8 slots and an automatic feed unit for workpieces up to 1500 mm in length. Fully enclosed safety guards ensure compliance with EU standards. If you are looking to get high-quality woodworking capabilities, consider the INTOREX TKC-1500 machine we have for sale. Contact us for more information.

This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information.

This Baykal BPH 1503 + Hypertherm HPR 130 Plasma Cutting machine Machine was manufactured in the year 2012 and has 18000 production hours. It is equipped with a Baykal control unit.

This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information.

This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information.

Vertical Machining Cenre DUGARD EAGLE 1500

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm Information No.5066 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHermann Waldner ...

Manufacturer: Arburg Model: 520S 1500/800 + Robot Type: Injection moulding machine Year of manufacture : 2010 Operating hours: 91720 Closing force: 150 t Screw diameter: 45 mm Max. injection volume: 318 cm3 Fixing plate: 688 x 688 mm Machine weight: 6.84 t Find more here - / Contact us at -

A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible.

Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible.

Herding Extraction System COMP 1500-8/9 SB Manufacturer: Herding GmbH Filtertechnik Model: Herding COMP 1500-8/9 SB Year of manufacture: 2018 Type: Industrial Extraction System / Filter System Air volume flow: 2000 m³/h Weight: 1000 kg Control: Herding MP 12 Filter cleaning: pneumatic pulse cleaning Machine ID: 28694 Machine ID: 28695 CE marking: available Number of units: 2

table diameter: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

660 x 1500 Dough Mixing Machine Russian origin 110 kW motor Bearing-supported Flywheel gear system With brake Ready for operation / in working condition

table length: 1500 mm table width: 1000 mm table height: 150 mm bore: 22 mm weight: 420 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1500 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 585 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 Item #: Usm-242 Category Tetra Pak A3 CF/Flex USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 A3 Flex 1000ml Gemina Filling Machine, Version 150v, Year of manufacturing 2007, Speed 7000 Packs per hours, Working hours 43250 Cap Applicator Cap Flex 30, Year of manufacturing 2007, Cap Type Helicap 27 Conveyors and Paper trolly Condition: Good

Coolant filter system KNOLL KF 600 / 1500 -CE marking -Coolant tank -Paper belt filter -Control - OP 3 -Coolant pumps Dimensions: LxWxH 2.4x1.2x1.5 meters / Weight 1200Kg

Key data: 80 mm, 1500 mm

Stock number: 4025 Full boron capasitet 10-80 mm Drilling depth 1500 mm Max. workpiece 500 mm Total power 67 kW Accessories: Tool Holder Pcs Length: 6500 mm, Height: 2000 mm, Width: 2100 mm, Weight: 8500 kg

General SKU335X739 MakeNorbert Karasek LocationBarneveld CEcheck TypeTank 1500 L Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1500 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1500 Ltr. (max. 1678 Ltr.) Vessel sizesø 1200 x 1707 Dished bottomcheck Top connectionscheck Outletcheck 2x DN25 (with valve) With jacketcheck (101 Ltr.) Max. temperature145 °C Motor2.2kW, 230/400V, 1410rpm Speed mixing shaft86 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.2639 Year of construction2002 Mounted on legscheck Floorspace1,30 x 1,30 m Total height3,0 m Weight1394 kg Extra SpecificationsComes with 2 sieve CarriersStainless Steel ReactorsNorbert Karasek GmbH GloggnitzReactors > Stainless S ...

General SKU338X773 MakeBWT LocationBarneveld CEcheck TypeLoopo 150C Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4435(316L) Filtercheck Information No.L15070 Year of construction2015 Extra Specificationscapacity: 15m³/h Purified Water quality from Osmotron System : Conductivity: Miscellaneous filtersBrand > BWT Septron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKULX002 MakeMolteni LocationNetherlands TypeMH/CC.1500 SV Main Features MaterialMild steel Volume1500 Ltr. Motor90 KW Specified Features - Dissolver Dissolvercheck Double shaftcheck With covercheck With scrapercheck Hydraulic drivecheck With hydraulic unitcheck Motor90kW With pans2x Capacity1500l Pan sizesDia. 1295 mm With jacketcheck 1 vessel is with jacket With hydraulic liftingcheck MaterialMild steel Information No.4-1 Year of construction1986 With switchgearcheck (as is) Floorspace2,5x1,5 m Total height4 m Weight5200 + 1400 kg Extra Specificationsthe controls of this machine were recently renewed Linde hydraulic unit with motor, 90 Kw, 1480 rpm, 380 volt with two vessels: - Silver one: Outer diameter top flange : 1355 mm Inside diameter 1295 mm Wall thickness 8 mm  : - Green one: Outer diameter top flange : 1355 mm Inside diameter 1295 mm W ...

turning diameter: 190 mm turning length: 235 mm control: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/min turret head: 2x 16 weight of the machine ca.: 7.5 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 190 mm turning length: 235 mm control: FANUC/Mori MSX 501 spindle turning speed range: 50-5000 U/min turret head: 2x 16 weight of the machine ca.: 7.5 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis MICROCUT Challenger VM-1500 was manufactured in 2007. It features a table size of 1,500 x 660 mm, capable of handling a maximum weight of 1,000 Kg. The machine offers X, Y, and Z travels of 1,500 mm, 680 mm, and 670 mm respectively, with a rapid traverse rate of 20 m/min. It includes a BT 40 spindle taper and a spindle speed up to 8,000 rpm. Contact us for more information about this machine.

General SKU232T253 MakeAndritz Girapac TypeGPV2 1500 T3 No.14425 Year of construction2003 LocationBarneveld Main Features MaterialMild steel/Stainless steel Motor0.75 KW Surface5.6 m2 Specified Features - Rotating sieve Filter surface5.6m² Drum sizesDia: 600x1500 MotorDrum: 0,37 kW, Screw: 0,75 kW With knife dischargecheck Manual operatedcheck Rotating sieves Inletdia. 220 mm MaterialMild steel, Stainless steel Information Floorspace2,4x1,5 m Total height1,6 m Weight600 kg Extra Specificationscapacity: 135 m³/h inlet: Dia: 220 mm output: Dia: 145 mm : output screw: length 1850 mm, Dia: 145 mm Rotating sievesAndritzSieves > Rotating sievesBrand > Andritz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

General SKU221P186 MakeBerief Maschinen- und Anlagenbau GmbH (DE) No.08108.19.19.00 Year of construction2006 LocationBarneveld Main Features MaterialStainless steel Volume1500 Ltr. Motor0.75 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity1500 Ltr Vessel sizesdia.1300mm x1200mm Dished bottomcheck Flat top sidecheck With coverincl.gitter Top connections(2x)dia.80mm, (2x)dia.50mm, dia.25mm Outletdia.80mm Motor0,75kW, 230/400V, 1435 rpm MaterialStainless steel Information Floorspace1,9x1,6 M Total height2,5 M Weight1000 KG Extra SpecificationsScrew and Scraper totall 1,30 kW, 400 VoltStirring vesselsBeriefStirring vessels > Stirring vesselsBrand > Berief What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect  ...

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

Ungerer RP 1500 x 3 mm Max sheetwide: 1500 mm Max sheetthickness: 3 mm

General SKU430W1389 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity150 l Vessel sizesDia. 700 x 800 mm Dished bottomcheck Top connectionscheck OutletDN25 With jacketcheck Max. temperature200°C With propellor stirrercheck Motor0,37 kW (400 V, 1500 rpm) Speed mixing shaft85 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information No.5067 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,95x0,90 m Total height1,80 m Weight600 kg Extra Specifications- Mirror polished inside Stainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > He ...

General SKU294P561 MakeHet Noorden BV (NL) No.2000-0976-1 Year of construction2001 Mounted on legscheck Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume15000 Ltr. Motor5.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4404 (316L) Closed stirring vesselcheck Capacity15000 Ltr Vessel sizesdia. 2600 x3000mm Dished bottomcheck Dished top sidecheck Manhole540x410mm Top connections(1x)dia. 150mm, (1x)dia. 50mm, (1x)dia. 80mm Outletdia.80mm Max. temperature100 degr.C. With paddle stirrerMRSK-MS70 Motor5,5 KW, 400/690 Volt (Ex II 2D) Speed mixing shaft173 rpm Information LocationBarneveld With switchgearcheck Floorspace+/- 3,0x3,0 M Total height4,7 M Weight2700 KG Extra SpecificationsInternal heating coil Stirring vesselsRVS Het NoordenStirring vessels > Stirring vesselsBrand > RVS Het N ...

Arburg 470C 1500-400 with the Wittmann W721 robot Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of Make: 2006 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4 ...

Key data: 1500 kN

Arburg 470C 1500-675 Year of Make: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 470C 1500-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Robot Wittmann W711 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Traversing in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps ...

Key data: 1500 kN

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...

Key data: 1500 kN

Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control Dimension ...

Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...