128,639 used machines on RESALE, but how to find them? Machine Search
This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15 SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine.
General SKU277U494 MakeAllgaier TypeTSM 950/1 No.155 Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Surface0.71 m2 Sizes diameter950 mm Specified Features - Tumbler screener Sieve surface0.71 m² Number of sieve decks:1 Sieve sizesDia: 950mm With covercheck Inlet195 mm Outlet95 mm Motor0,75 kW, 220/380 volt, 2800 rpm Sieve perforation2mm With ball cleaningcheck Tumbler screening machines MaterialStainless steel 1.4306 (304L) Information Mounted on mild steel framecheck Floor space1,4x1,4 m Total height1,2 m Weight400kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
General SKU261W1591 MakeAllgaier LocationBarneveld CEcheck TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener MaterialStainless steel 1.4301 (304) Tumbler screening machines Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation3x 0,600mm-0,600mm-0,710mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,600mm-0,600mm Information No.4003 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...
grinding wheel diameter: mm table length: - mm table width: - mm total power requirement: 5,5 kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU409X1231 MakeDrM LocationBarneveld CEcheck TypeTSD 316 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck (Laboratory Filter) Filter surface0,012 m² Information No.1002561 Year of construction2017 Floor space0,9 x 0,5 m Total height1,65 m Extra SpecificationsTechnical specifications Filtration area: 0.012 m² Filling volume: 0.95 L Max. operating pressure: –1 / +20 barg Max. operating temperature: 250 °C Filter element: Stainless steel candle Gasket materials: FKM / PTFE / FEP Miscellaneous filtersDrM - Dr Müller AGFilters > Miscellaneous filtersBrand > DrM - Dr Müller AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg
1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.
This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 â 7000 rpm and sub-spindle speeds of 200 â 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details.
plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GENERAL Project No.: 905777 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49590 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...
GENERAL Project No.: 905776 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2014 Condition: Used machine Approx. (hrs): 32126 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...
GENERAL Project No.: 905778 Quantity: 1 pcs. Manufacturer: TSUGAMI Type: BO326E-II Control: Fanuc 32i MB Year of Make: 2016 Condition: Used machine Approx. (hrs): 49661 DESCRIPTION TURNING 8Axles Max. turning diameter 32 mm Max. turning length 320 mm Max. speed main spindle 8000 1/min Max. power main spindle at ED 10-40/100% 5.5/3.7 kW Spindle aperture main spindle 8-32 mm Axes on the main spindle unit C Workpiece spindle stroke main spindle 320 mm Hollow clamping cylinder on the main spindle Max. speed sub-spindle 8000 1/min Max. power sub-spindle at ED 10-40/100% 3.7/2.2 kW Axes on the sub-spindle unit C Coolant supply through the sub-spindle Workpiece ejection through the sub-spindle Workpiece ejector in the sub-spindle OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Preparation f ...
Refrigerated counter Coldline Master GN 2 for fast and flexible application Model No.: TS13/1M-760 Stainless steel version Cooling range - 2 to + 8°C adjustable Convection cooling Device is plug-in, 2 doors Connection 230V Dimensions: 1300 x 680 x 860 mm, WxDxH Used device
grinding diameter: 200 mm grinding length: 340 mm centre height: 100 mm Control: CNC : 25 kVA voltage: 110 / 220 / 3x165 / 3x380 VAC control voltage: 24 VDC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sourdough plant with cooling ThörmerManufacturer : ThörmerType: TSHKWA 4001With built-in own aggregate Condition: Not tested must be checked completelyDetails see pictures.Payment: Bank transfer or cash payment
LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...
sheet width: 4050 mm plate thickness: 10 mm column arm: 100 mm table height: 900 mm Number of hold downs: 21 Stück cutting angle: 2 ° total power requirement: 22 kW weight of the machine ca.: 17.100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power supply unit, DIN rail -360 W, 24 V/1 5 A -Power supply output type: Fixed/Adjustable -AC input voltage: 85 V to 132 V, 187 V to 264 V. -Number of output channels: 1 -Nominal output voltage: 24 V -Output current max.: 15 A -Power output max.: 360 W -SVHC: No SVHC (19-Dec-2012) -Areas of application: Industrial -External width: 80 mm -Width: 80 mm -Input voltage change: 0.5 % -Frequency input-: 63 Hz -Frequency supply max.: 63 Hz -Power supply unit -Frequency supply min.: 47 Hz -Weight: 1.1 kg -Height: 125 mm -Load change: 0.5 % -Length: 125 mm -Length outside-: 125 mm -Mounting: DIN rail -Rated power: 360 W -Voltage output: 24 V -Voltage output max.: 28 V -Voltage output min.: 24 V -Current output: 15 A -Power supply type: switch mode -Depth outside: 125 mm -Supply voltage: 264 V -Supply voltage max.: 264 V -Supply voltage min.: 85 V
4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Bosch / Rexroth, control block from rotary transfer machine Uldrian TSM 22-8 -Valves: Bosch 0 810 091 227 0 811 150 233 -Rexroth: 4WE 6 D7X/HG24N9K4 -Individual components: see photos -Total dimensions: 390/350/160 mm -Weight: 30 kg
machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle -Manufacturer: GMN, grinding spindle precision spindle for belt drive -Type: TSAV 140s x 270-6212 L 260980 Overbeck 01340 -Mounting: cone on both sides Ø48/56 mm / thread M40 x 1.5 -Grinding disc holder: Ø 127 mm -Dimensions: see photo sketch -Total dimensions: Ø140 x 450 mm -Weight: 30.3 kg
Probe, 2D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, universal 2D probe, probe tip, rotary/swivel head, probe head, rotary/swivel head, edge finder -Manufacturer: Tschorn, edge finder type 2D/Ø16 -Item No.: 0010216RO -Sensing ball: Ø 10 mm -Dimensions: 110/30/H30 mm -Weight: 0.1 kg
General SKU426X1426 LocationBarneveld CEcheck MakeAllgaier Main Features MaterialStainless steel Surface2.3 m2 Sizes diameter1720 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,3 m² Number of sieve decks:3 Sieve sizesø 1720 mm With covercheck Inletø 300 mm Outletø 200 mm Drive vibro motorcheck Motor3,0 kW, 400/690 V, 1415 rpm, (Ex) Sieve perforation10 mm, 5 mm, 3 mm With ball cleaningcheck With extra sieve decks8 mm, 3 mm, 1 mm Tumbler screening machines MaterialStainless steel 1.4305 (303), Stainless steel 1.4571 (316Ti) Information Serial5795 TypeTSI 172 Year of construction2004 Year of construction2004 Mounted on mild steel framecheck With switchcheck Floor space2,10 x 2,00 m Total height1,80 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is ...
Overview This filler was manufactured in 2016 by CIMEC and comes with an Arol crown capper. The filler has an output of 1,800 bottles per hour, processes bottle sizes from 0.33 l to 0.75 l and is in very good condition. The machine can be viewed in person at any time. Technical details Filler | CIMEC | AM DPS 9-8-1C | 2016 Output: 1,800 bottles/hour Number of rinsing nozzles: 9 Number of filling valves: 8 Bottle sizes included: 0.33 l - 0.75 l (with other set also 0.5 l) Electrical power: 6 kW, 400V, 50Hz Dimensions Width: 1,400 mm Length: 3,200 mm Complete length with labeler: 8,800 mm Operating hours: 1,370 hours Complete documentation available Capper | Arol | TSI-Eagle C | 2016 Pitch diameter: 410 mm Number of heads: 1 Type of closure: Standard crown cork Complete documentation available
Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment.
Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred.
with pre- and attached roller raceway and frame shelf
For sale I offer a hydraulic cylinder from Tecpos. The cylinder was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos TSLC-3013 Operating pressure: max. 700 bar Stroke: 13 mm 30 ton Flat cylinder -Single-acting, with spring retraction Shipping available for an extra charge. The hydraulic cylinder is workshop tested and sold immediately ready for use with a new UVV test and can be tested on site. Other accessories available on request. # Short Stroke Heavy Duty Cylinder # High Pressure Hydraulics # Compact Cylinder # Light Metal Cylinder # High Pressure Cylinder # Universal Cylinder # Hydraulic Cylinder # Directional Cylinder # Hydraulic Punch # Hydraulic Pressure Cylinder # Lifting Cylinder # Pressure Punch # Hydraulic Short Stroke Cylinder # Hydraulic Flat Cylinder
Working width: 3100mm, usable cutting length: 3050mm, max. sheet thickness: 16mm, stroke rate: 12/min, backgauge range: 10mm-1000mm, throat depth: 300mm, table width: 350mm, max. hydraulic pressure: 280bar, oil volume: 480l. Machine dimensions X/Y/Z: approx. 3700mm/2200mm/2000mm, weight: approx. 6600kg. An on-site inspection is possible.
Description with side parcel extension SPA Twin for mark-free laying out max. format 500x340mm min. format 100x100mm Product thickness max. 6mm High storage capacity Stacking height per level max. 10cm Optimal for one-man operation on folding machines at high machine speed up to 18,000 cycles User-friendly, ergonomic acceptance
Description High-performance package delivery Heidelberg Stahl Twinstacker TSH-100 from 2011 -Ideal for one-man operation on folding machines with high machine speed up to 18,000 cycles -MCT control -Mark-free laying out up to three panels, with user-friendly ergonomic removal -max. format 1000x340mm -min. format 100x100mm -Product thickness max. 6mm -Stacking height per level max. 10cm
Description Pocket folding machine Heidelberg Stahlfolder TH 82-6-4-2-PFH with twinstacker TSH-70 from 2008 Pallet feeder PFH-82 with tremat and MCT control 1st station BUH-82 with 6 pockets 82 cm, PU folding rollers renewed in 11-2016 downstream knife shafts with lift kit various tools for cutting, creasing and perforating noise protection hood 2nd station BUH 66-4 with 4 pockets 66 cm, downstream knife shafts with lift kit noise protection hood 3rd station BUH-56 with 2 pockets 56 cm, downstream knife shaft noise protection hood package stacking delivery Stahlfolder Twinstacker TSH-70 with press and
General SKU050F242 MakeGEA Aeromatic-Fielder UK TypeTSG-2-B5-F4, Spray arm/nozzle is missing LocationBarneveld CEcheck Specified Features - Fluid bed dryer batch Material finishMirror polished inside Main Features MaterialStainless steel Volume47 Ltr. Motor3 KW Fluidbed dryers batch Fluidbeddryercheck With pan mounted on wheelsPan equipped with non-sifting Gill plate Capacity47 Ltr. Pan sizesø 460 x 500mm With pumpcheck Can be heated by steamcheck With fanmake Meidinger, type HA-100-M3/825 Capacity360 m³/h Motor3,0 kW, 400/690 V (IP55) With dust filtercheck MaterialStainless steel Information No.869500 Year of construction1998 With switchgearcheck Floorspacedryer 1,2 x 0,9 m Total height3,1 m Weight2000 kg Extra Specifications- spray arm is missingDiscountFluid bed dryers batchGEA AeromaticDiscountDryers > Fluid bed dryers batchBrand > GEA Aeromatic What ...
Drying oven, with built-in fan and extraction pipe 30°C to 300°C 7.5 kW functional, relatively heavily soiled
General SKUR0867 LocationBarneveld MakeP.Spiess-Tschudin AG (CH) Main Features MaterialStainless steel Motor5 KW Surface2.5 m2 Specified Features - Nutsche filter Filter surface2.5 m2 Vessel sizesdia. 1750x400mm Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) With stirrercheck Motor5,0 kW, 380 Volt (Ex) Stirrer can be liftedcheck MaterialCeramic, Stainless steel Information TypeFZS 80 F16 Mach.No.unknow, manufacturer plate is missing Year of construction1967 Mounted on legscheck Floorspace2,1x 2,0 M Total height4,0 M Weight2600 Kg ATEX compatiblecheck Extra Specificationsbottom provided with permeable tiles ( Silexith) wall with ceramic tiles inspection hatch in the wall 400x300mm Catalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceutics ...
General SKU316W643 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1634 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1634 mm Between inlet and outlet1500 mm Shaft diameter85 mm Pitch200 mm Inletø 230 mm Outletø 290 mm Motor1.1 kW,(400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet500 mm With coverscheck Information TypeTSE 250/1634 Mach.No.04/3371 Year of construction2004 Floorspace2,60 x 0,40 m Total height0,90 m Weight320 kg Extra Specifications- opening for dust extraction/filter on top Catalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfec ...
General SKU316W642 LocationBarneveld CEcheck MakeSB Schneckenbau GmbH Main Features Motor1.1 KW Length1872 mm Inlet diameter240 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304) Horizontal conveyor screwcheck Trough-typecheck Diameter270 mm Length1872 mm Between inlet and outlet1700 mm Shaft diameter85 mm Pitch200 mm Inletø 240 mm Outletø 295 mm Motor1,1 kW (400 V, 1700 rpm) Screw speed40 rpm Height between in- and outlet400 mm With coverscheck Information TypeTSE 250/1872 Mach.No.04/3371 Year of construction2004 Floorspace2,90 x 0,40 m Total height0,80 m Weight380 kg Extra Specifications- opening for dust extraction on topCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectioneryS ...
General SKU041F169 Mounted on framecheck Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume630 Ltr. Motor145 KW Specified Features - Hot mixer Hot/Cold mixerPxx compounder (1x) CapacityN-TSHK 630 High Speed mixer = 630 Ltr Vessel sizesdia. 935x950mm With jacketcheck Max. temperature220 Degr. C. With motor115,0/145,0 KW, 380 Volt Pneumatic operated outletdia. 250mm Cold mixertype HCC-2000 High Capacity Cooling System Capacity2000 Ltr Vessel sizesdia. 1000x2000mm With jacketMixing shaft can be cooled With motor37,0 KW, 380/660 Volt With lump breaker(2x) Motor4,4/5,5 KW, 380 Volt (1420/2860 Rpm) MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchgearcheck Floorspace5,0x2,7 M Total height3,8 M Weight9800 KG Technical specs Extra informationcold mixer dia. 1000x2000mmDiscountHot mixersPapenmeierDiscountPlas ...
General SKU232M160 LocationBarneveld MakePierre Guerrin Technologies TypeTSI-3 No.S8240200 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume3 Ltr. Specified Features - Paddle dryer Paddle dryerTurbo-Sphere dryer (1x) Capacity3,0 Ltr (tot 4,48 Ltr) Trough sizesdia. 200mm Outletdia. 35mm With jacketCover can be heated (microwave) Max. temperature130 Degr C MotorDC motor (104 Volt) With variable speed drivecheck With lump breakercheck With vacuum pumpMake. Vacuubrand RE 5 capacity 5,6 m3/h MaterialStainless steel 2.4602 (Hastelloy C-22) Information Year of construction1999 With switchcheck Floorspace1,0x0,9 M Total height1,5 MCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals ...
TSUGAMI B0206E-II Sliding Headstock CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC series 32i-B Number of axes: 6 X1 Axis Fast Feed Speed: 24000 [mm/min] X2 Axis Fast Forward Speed: 24000 [mm/min] Z1 axis fast feed speed: 32000 [mm/min] Z2 axis fast feed speed: 32000 [mm/min] Y1 Axis Fast Feed Speed: 15000 [mm/min] Y2 Axis Fast Feed Speed: 15000 [mm/min] Maximum diameter in bar: 20 [mm] Minimum speed. Spindle: 200 [rpm] Maximum speed Spindle: 10000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Minimum speed. Spindle: 200 [RPM] Maximum speed Spindle: 12000 [rpm] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 2.2 [kW] Number of end device positions: 8 Number of comb positions 1 : 5 Number of motorized comb stations 1 : 3 Comb Turning Tool Speed 1: 8000 [rpm] Number of counter-operation positions: 8 Number of counte ...
max tenon width: 115 mm + thickness min and max tenon thickness: 0-42 mm min and max tenon depth: 10-45 mm Table adjustments: vertical: 80 mm tilting upwards: 0? - 15? tilting downwards: 0? - 30? side tilting: 0? - 20? fence on table for mitre positioning cutter spindle motor: 3 kW motor for drum rotation: 0,75 kW
A low-voltage reactive power compensation system Bausatz for improving the power factor is available. Controller: BLR-CB, total reactive power: 300kVar, number of stages: 6, stage rating: 50kVar, rated current: 433A, degree of protection: IP20. In 2007, 16 power capacitors were replaced in the system. Documentation available. An on-site inspection is possible.
Internal cylindrical grinding machine, Tripet Swiss, 1991, Schleifdia. 0.5 - 30mm, Grinding depth: 50, Center height: 102, Axles: Z , Y, U, B, V, , autom. Chuck, ...
The straw applicator is the perfect solution for straw application. It is installed between the filling machine and the packaging machine and has servo motors and one or two inverters. The regulated and controlled application of the straw is thus perfectly possible. For years, this unit has been one of the most popular on the market. The constant and trouble-free speed of up to 7500 units/h is ideal for use in conjunction with the TBA 19 filling machine. To ensure that everything runs smoothly, we recommend installing a conveyor belt volume of at least 20m between the filling machine and the applicator. All components were checked and tested. The range can be used for different volume sizes. For this purpose, various components have to be replaced, which we are happy to do at the customer's request. On request, we can provide extensive services. In addition to consulting and plannin ...
This is a power unit with 2 servo motors. The TSA 46 applicators have a compact design and are very reliable. Trouble-free operation in a filling line is guaranteed even with long operating times. We have different variants of straw applicators in our warehouse. Regardless of the condition, all devices undergo a service in which the perfect status is established. For this purpose, wear parts are also replaced and finally various test runs are carried out for later use. Since the package size and also the type of straw vary, we can only assemble the final format parts after an order. If you are interested, please let us know for which format you want to use a TSA 46. We will make you an offer immediately. On request, we can provide extensive services. In addition to consulting and planning, this also includes transport, assembly and assembly. We will be happy to provide you with a deta ...
Key data: 6 mm, 350 mm, 1
Refurbished 2005 Number of Spindles: 2 Drilling capacity/spindle, steel: 1-6 mm Drilling depth: max. 350 mm Travel Z: 350 mm Travel W: 350 mm Drive power/spindle - 100% ED 3.7 kW - 50% ED 5.5 kW Spindle speed: 3,000 - 27,000 1/min Spindle holder: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant quantity: 1,000 l
: neu : ca. 2 - 4 Wochen ab Auftr : 4852.45 € : 250 x 40 x 51 mm : 1300 x 75 mm : 1,4 kW : 1400 1/min : 15 m/s : 42 mm : 600 mm : 540 mm : 1190 mm : 1200 x 800 x 1000 mm : 70 kg With base frame, integrated suction and brake High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug ALTERNATIVES: Version without suction (Art. 330.365) Version without stand, suction and brake (Art. 330.360) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...
turning diameter over bed:20 mm spindle passage:3-20 mm turning length:250 mm control:FANUC 31 i-A main-spindle speed:10.000 1/min subspindle speed:10.000 1/min Main spindle capacity:3,7 kW subspindle power:2,2 kW number of tools:35 weight of the machine ca.:3,3 t dimensions of the machine ca.:2,11 x 1,2 x 1,89 m CNC sliding headstock turning/milling centre with B-axis Control system: Fanuc 31i-A Machining length: max. 250 mm Number of controlled axes: 7 axes and max. 5 axes simultaneously B-axis: 0°-130° freely programmable Rod passage: Ø 3 mm to max. Ø 20 mm Drive power main spindle: 3.7 kW Drive power counter spindle: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: Main and counter spindle Number of linear supports: 2 pieces Total number of tools: 35 pieces Dimensions (LxWxH) in mm: 2,110×1,200×1,885 Weight: 3,300 kg Conversion from long to short ...
maximum number of results exceeded
please refine your search
750 € 
