ts 150 used for sale

Type: Supercoater600 Serial number: 201003-00134 Year of construction: 2010 Belt width: 600 mm Power: 3 x 400V, 50Hz, 1.3kW Dimensions: 1500 x 1150 x 1300 mm

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...

Lamella water sedimentation tank 7000 lt/Hour Stainless steel 304, 4mm thickness

Height=0.975 m, Overall length= 1.26 m, Overall width= 0.83 m, Net weight= 280 kg,

Inv. Num. : 8646 Type: MB35E Producer: TSUGAMI Generated: Parameters: Control system: FANUC Weight: 3500 kg Equipment: IEMCA BOSS 542 Bar Feeder

Inv. Num. : 8647 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Control system: TSUGAMI MORU MSC 501 Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

Inv. Num. : 8648 Type: BS12 (AE) - III Producer: TSUGAMI Generated: Parameters: Side length: 170 mm Max. turning diameter: 3-12 mm Maximum spindle speed: 12000 1/min Spindle bore: 7 mm Weight: 2200 kg Equipment: Bar Feeder TSUGAMI

Inv. Num. : 8649 Type: R16A-II Producer: TSUGAMI Generated: Parameters: Rolling force: 160 kN Max. diameter: 75 mm Max. length: 150 mm Weight: 2500 kg

1-deck swashscreen with a screening area of 0.72 m² per deck, drive 1.5 kW via V-belt (engine renewed). Including 1 piece sieve insert (current mesh size approx. 20 mm).

1-deck swashscreen (expandable to 2 decks) with a screening area of 1.80 m²/deck, drive 4.0 kW via V-belt (engine renewed). Including 1 pc. sieve insert (not strung; stainless steel blank).

1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.

Bread loaf forming line composed of: -Weigher / divider / girder: For all types of dough (year 2007) Automatic lubrication system. Adjustable weight. from 60 to 600 grs. Speed variator. 40 kg hopper for dough, made of stainless steel and non-stick material. Flour sifter. Digital parts count. -400-basket resting chamber, manufactured in 2004. Adjustable time. -Bread loaf former, made in 2004 tape width: 600mm

Ingersoll Rand TS3A Compressed Air Refrigeration Dryer 12 bar For sale is a used, professional compressed air refrigeration dryer from the manufacturer Ingersoll Rand – model TS3A, built in 2008. Technical features: Max Air Pressure: 175 psig (12 bar) Max. Air Inlet Temperature: 60 °C (140 °F) Cooling System: Air-cooled Operating Voltage: 400V/3Ph/50Hz Refrigerant: R404A (3.36 lbs / 1520 g) Refrigerant Oil Type: ISO 32 Polyol Ester (POE) Power consumption: 4.8 kW Weight: 230 kg Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!

Manufacturer: Cleco / Apex Tool Group Type: TSE 961446PT Voltage: 380 V DC Current: 2-10 A DC Operating temperature: -20 to +70 °C Humidity: 0-90% without condensation You can also find the corresponding screw control in our shop!

: 3050 mm : 12,0 mm : - : 0,5-3,0 ° : 1000 mm table height: 930 mm work height max.: 930 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 32 mm, 32 mm, 320 mm

Stock number: 4011 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2015 Machine NO.: 22106A, Year of manufacture: 2015 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 (4800) rpm Subspindle effect 2.2/3.7 kw Control Fanuc 31i - B Fabr. Axis controlled 6 pc. - X1-X2-Z1-Z2-Y1-Y2 Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg

CERAM rotary sieve Sold with a 4 mm mesh, Number of sieves: 1, Mesh size: 4 mm, Engine: Leroy Sommer: 0.75 kW, Dimensions (mm): 1600x720 H 1215

Oven (defective) Manufacturer: WIESHEU Type: B15 TS200 Specifications: 400V / 50Hz Dimensions WxDxH: 100 x 90 x 225 cm Year of manufacture 2005 including loading trolley & 1 crate of new baking trays Due to age SALE AS DEFECTIVE! Condition & accessories, see original pictures! If you have any questions, email or call.

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 oil volume: 160 L Control: ELGO P8511 column arm: 200 mm distance between columns: 3050 mm 0: max. 300 bar voltage: 400 V main drive: 9.0 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear swing cut - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left for positioning the electro-motoric rear stop target/actual position value input possible adjustment by three-phase motor via toothed belt - support table with ball rollers there are recessed grips between the table plates - front finger guar ...

Type Loedige TSHK-160/KGU-400 Serial No. 3901 Year of manufacturing 2004 Hotmixer 210 Liter Blj Uovzzw Ued Dvycsp Coolingmixer 391 Liter

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

Tripet TST201CNC nr 3520.17.137 BJ.1987

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 2 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 42 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 450 rpm, 2 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-25-CP, high temperature high pressure machine, year 2008, capacity 25 Kg, drum diameter 1100 mm, drum depth 610 mm, drum volume 580 L, dye cycle controller TUPESA type RS-BASIC PLUS touch screen, drum rotation 0-28 rpm, machine equipped with centrifugation process of 700 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-55-CP, high temperature high pressure machine, year 2004, capacity 55 Kg, drum diameter 1250 mm, drum depth 1100 mm, drum volume 900 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 650 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

General SKU261W362 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4002 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1435 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,4mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsonly the brush for the lower screen deck is present in the machine.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expec ...

General SKU261W365 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.4005 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,710mm-0,400mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,600mm-0,400mm-0,315mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 m Extra Specificationsthe spacer for the upper brush, is not present.Tumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect  ...

General SKU261W359 LocationBarneveld MakeAllgaier TypeTSM 2000/DS/1 No.3998 Year of construction1997 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200 mm Drive excentercheck Motor4 kW, 400 volt, 1440 rpm Sieve perforation0,710mm-0,600mm-0,600mm With brush cleaningcheck With extra sieve deckscheck 3x 0,315mm-0,160mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck Total height2,00 m Weight1080 kg CEcheck Floor space2,00x2,00 mTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price  ...

General SKU211N1319 LocationBarneveld MakeElektronik Apparatebau GmbH TypeTS30-D /Pn /Wr No.1100/31 Main Features MaterialPlastic Dia/Width150 mm Specified Features - Metal detector MaterialPlastic, Stainless steel 1.4301 (304) Vertical metal detectorcheck Electric capacity230 V Product space50x200 mm InletDia 160 mm With ejectorcheck valve Outlet2 x 160 mm Information Floorspace0,7 x 0,6 m CEcheck Total height0,9 m Weight50 kgMetal detectorsElektronik ApparatebauPackaging machines > Metal detectorsBrand > Elektronik Apparatebau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

FROGERAIS dragee coating turbine, Engine: Type B F 80 b: 0.96 kW, Turbine diameter (mm): 900, Turbine depth (mm): 630, Dimensions (mm): 1530x1250 H2600

sheet width: 2500 mm plate thickness: 4 mm distance between columns: . mm Control: rear stop: The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeiten und schnelle Umrüstzeiten ausgelegt ist. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 kombiniert diese Gebrauchtmaschine bewährte SAFAN-Qualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten.Was das für Sie bedeutet- Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bewältigen eine breite Palette von Teilen in Stahl, Edelstahl und Aluminium.- Genauigkeit über die volle Länge. Wila CNC-Bombierung und eine Einlauftiefe von 400 mm sorgen für gleichbleibende Winkel und reduzieren Nacharbeiten.- Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugklemmen besc ...

Die SAFAN H-Brake 120-3100 TS1 ist eine robuste hydraulische Abkantpresse, die für konstante Genauigkeit, hohe Betriebszeit und schnelle Umrüstungen entwickelt wurde. Mit 120 Tonnen Presskraft und 3100 mm Biegelänge bietet dieses Modell zuverlässige Leistung für anspruchsvolle Produktionsumgebungen. Als eine gebrauchte SAFAN H-Brake 120-3100 TS1 aus dem Jahr 2005 vereint diese Gebrauchtmaschine die bewährte SAFAN-Bauqualität mit intelligenten Optionen, die Ihre Werkstatt produktiv halten. Was das für Sie bedeutet - Kapazität und Flexibilität. 120 T Presskraft und 3100 mm Biegelänge bearbeiten ein breites Spektrum an Teilen in Stahl, Edelstahl und Aluminium. - Genauigkeit über die gesamte Länge. Wila CNC Crowning und eine Ziehtiefe von 400 mm helfen, konstante Winkel zu halten und Nacharbeit zu reduzieren. - Schnelle Einrichtung. Wila New Standard hydraulische Werkzeugspannun ...

Haco TSX 3100 x 6 mm CNC Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 8 > 14 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 7,5 kW Length: 3880 mm Depth: 1650 mm Height: 1700 mm Weight: 4,5 ton Number of sheet holders: 18x

Transnorm belt curve conveyor right GKF 90°-810-600 IR600 RA1804 Technical data: Type designation: Belt curve conveyor TS 1500-100 Frame width (NB): 810 mm belt width (GuB): 600 mm height (BH): 330 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: KT58 Year of construction: 1990 Optionally available: Supports Side guide one and both sides Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 1990 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 810 Belt width in mm: 600 angle: 90° Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 scope of delivery: without supports and side guid ...

Provisur Coater TST Coating machine Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock

Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

Type: TSO600/96/4 TH Serial number: 10064051 Year of constructon: 2007 Model: right hand execution Belt width: 600 mm Belt length: 96 m Tiers: 2 x 4 pc Heating: thermal oil, 400 kW at 180°C Steam: max 1500 kg/h Exhaust: Ø 252 mm, 1000 m³/h Compressed air: 6 - 8 Bar Cold water: 1 - 20°C, 3 m³/h Hot water: 20 - 60°C, 4 m³/h Power: 3 x 400V, 50Hz, 40kW Dimensions: 11040 x 4000 x 4975 mm Weight: 20000 kg With belt washer and CIP

Circular Saw Milling Machine  Machine stand can be moved with pallet truck  Front-facing operation  Front sliding slide lock  Bevel cuts with tiltable stop on the carriage  Milling spindle D 30 mm Casting table 1470 x 725 mm Table height from the floor 860 mm Aluminium sled 3160 x 275 mm Suction nozzle for milling machine and saw bottom 120 mm Milling fence with D 150 mm nozzle  Saw motor 4 kw Milling motor 4 kw Cutting height 110 mm Saw blade side adjustment 160 mm Milling Speeds 2900-4400-6000-8000-10000 3 table rings for slotting tools up to 350 mm Weight approx. 1100 kg  Other technical

TECHNICAL DATA: Milling machine: - Spindle diameter 30 mm - Spindle height 140 mm - Spindle lock - Height adjustment - Main motor 4 kW - Tool diameter max 300 mm - Sliding carriage 1400 mm in aluminium - 4 speeds Circular saw: - Max. saw blade diameter 300 mm - Max. cutting height 80 mm - Cutting width at the guide 600 mm - Main motor 3 kW - Saw blade adjustment (up and down - as well as tilt adjustment) - Carriage length 1400 mm - Casting table dimensions 1400 mm x 700 mm Transport dimensions: - L x W x H = 150 x 110 x 120 cm - Weight approx. 700 kg

Key features: Tank capacity: 300 kg Installed power: 4.0 kW (4.4 kW with screw conveyor) Standard voltage: 400 V – 50 Hz – three-phase (other voltages on request) Dimensions: 1000 × 1250 × 1600 mm The TS300C is a professional chocolate melting tank designed to melt and keep large quantities of chocolate liquid for continuous feeding of tempering and enrobing machines. It has a 300 kg stainless steel tank with an integrated agitator, which ensures a uniform consistency and constant flowability – both when feeding with chocolate drops and solid blocks. Heating is provided by a bain marie system, controlled by a thermoregulator that ensures stable temperatures and preserves the organoleptic properties of the chocolate. The tank can optionally be equipped with a chocolate transfer system with screw conveyor as well as heated double-walled stainless steel piping, allowing  ...

General SKU261W363 LocationBarneveld CEcheck MakeAllgaier TypeTSM 2000/DS/1 Main Features MaterialStainless steel Surface2.6 m2 Sizes diameter1880 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2,6 m² Number of sieve decks:3 Sieve sizesdia. 1880 mm With covercheck Inletdia. 200 mm Outletdia. 200mm Drive excentercheck Motor4 kW, 400 volt, 1450 rpm Sieve perforation0,315mm-0,160mm-0,150mm With brush cleaningcheck With extra sieve deckscheck 3x 0,710mm-0,400mm-0,150mm Tumbler screening machines MaterialStainless steel 1.4301 (304) Information No.4006 Year of construction1997 Mounted on mild steel framecheck Floor space2,00x2,00 m Total height2,00 m Weight1080 kgTumbler screening machinesAllgaierSieves > Tumbler screening machinesBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

Flatepile Feeder, 4 Pockets, Delivery

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

1 of used trayshrinkpacker, make Kisters (KHS) type 140/60, new 1989, operating side left. Fitted with Siemens S7 controls / HMI and Bosch Rexroth servo drive MI-technology in 2012. Nordson hot-melt unit Originally supplied to pack food cans as 4x3 and 6x4 on tray plus film. Last used for food cans as 6x2 and 4x3 on tray + film. Size-adjustable via spindles and servos. Maximum capacity 60 trays/minute (depending on product).

Automatic horizontal band saw for cutting slats mod. TS400 – CE compliant - Dual-speed device - Max cutting capacity 420x200 mm. - Belt blade distance 2-150 mm. - Minimum cutting thickness from top 0.75 mm - Diam. flywheels 800 mm. - Flywheel width 50 mm. - Blade length 5500 mm. - Mixed oil cooling system - Hydraulic tensioning system 2500 kg - Variable feed speed 0-25 m/min - 2 hp feed motor with inverter - Main motor with 30 hp inverter - Lifting motor 0.5 hp - Nr. 3 suction ports 100 mm. - IE3 motor - Offset device - Matr. 15084 - Year 2022 - COMPLETE WITH MANUAL AND CE CERTIFICATION

sheet width: 3050 mm plate thickness: 6 mm weight: 7.000 kg range L-W-H: 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 9-axis TSUGAMI TMB 2E swiss type turning machine was manufactured in 2012. It features a main and counter spindle both with speeds up to 6,000 rpm and 11 kW power. The machine includes a 16-position turret and a milling spindle that reaches 10,000 rpm. It supports rapid traverse rates up to 50 m/min on X and Y axes, and 36 m/min on Z-axis. Consider the opportunity to buy this TSUGAMI TMB 2E swiss type turning machine. Contact us for more information.

This 6-axis TSUGAMI HS32 swiss type turning machine was manufactured in 2011. It features a maximum bar capacity of 32 mm and is equipped with a Fanuc 32i-B CNC control system. The main and sub-spindle speeds reach up to 8,000 rpm, with live tool speed up to 5,000 rpm. Consider the opportunity to buy this TSUGAMI HS32 swiss type turning machine. Contact us for more information about this machine.

This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine.