ts 150 used for sale

Telemecanique TSX 17 PLC

cross-section width:: -- mm cross-section heigth:: -- mm feed:: -- mm speed of feed:: 0,4 - 20 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

machine measurements: -- mm machine weight: -- kg power capacity: -- kW Condition: used, Specification: drum-type blast deburring machine type: MEWO Rotor TS 60 - batch volume approx.: 1-600 litres, - working temperature: - 150°C - drum speed: 5 - 30 rpm - Blast wheel speed: 1,000 - 9,500 rpm - Control: Siemens S7 Simatic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Available in stock 2 x NEVER USED Industrial Ventilation Fans TSBD-3. The photos are only examples of the same model. The ventilation fans on sale have never been used and are still inside the original packaging. Specifications: Model: TSBD-3 Dimensions: 1100 x 1100 x 400 mm Flow: 32 500 m3/h Power: 0.75 kW Voltage: 380 V Frequency: 50 Hz Blade Diameter: 1000 mm Speed: 427 r/min Single phase

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

SECOND-HAND CNC DOUBLE SIDED ROUND END TENONER BACCI TSD-E-NC14 - Working length mm. 1200 - Max tenon length 100 mm - Production: 2400 tenons/hour (1200 pieces/hour) - Tool rotation 9,000 rpm - Tenoning units motors (n.2) 8 hp (4hp each) - Touch screen NC control - With CSF loader - Safety net - S/N 800 - CE rules (year 2004)

spindle passage: 12 mm Control: Fanuc type: LB 2 bar loader: FMB total power requirement: kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TSUGAMI B0385L Swiss-Type CNC Sliding Headstock Lathe Year: 2014 Condition: Tooling included (as shown in photos) Specifications subject to buyer verification Machining Capacity • Max barstock diameter: 32 mm • Max machining length: 100 mm • Max main spindle drilling diameter: 13 mm • Max main spindle tapping: M12 • Max back spindle chucking diameter: 38 mm • Max back spindle drilling diameter: 12 mm • Max back spindle tapping: M12 • Max cross drilling diameter: 10 mm • Max cross tapping: M8 • Max tool spindle slotting cutter diameter: 45 mm Spindle Speeds • Main spindle speed: 200 – 6,000 RPM • Back spindle speed: 200 – 7,000 RPM • Tool spindle speed: 200 – 5,000 RPM Tooling & Axes • Total tool capacity (standard): 20 tools • Tool size: 20 × 20 × 125 mm • Controlled linear axes: 5-axis Ra ...

Code: 0310 Brand: ESY - ITALY Model: TSI 300 - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry workshops, custom-made furniture, wooden doors, window frames, kitchens, plastics, composite materials and various - CE Standard Technical data: Aluminium carriage length 2000 mm Support with metric rod with 2 reference stops Max blade diameter mm 250 Hole 30 Three-phase motor 2 Hp - 4500 rpm Scoring unit Tilting blade 0-45° Parallel guide width 800 mm 2-speed spindle moulder - 3500/7000 rpm - Max tool diameter 150 mm - Shaft diameter 30 mm Overall dimensions of assembled machine mm 2100 x 1900 x 1100 h Overall dimensions for transport mm 2100 x 1100 x 1100 h Weight kg 260

Pallet shrink machine with shrink hoods that descends and completely covers the pallet during the shrinking process. Energy sources: natural gas or liquefied petroleum gas and electrically powered. Function: Driven curtain to close the shrink bell opening Pallet base plate with integrated breather and ramp for Loading by means of a hand pallet truck Catalytic heaters ( No free flame ) Maximum power 13 Kw/hour Max pallet dimensions (standard version) length 1,200; Width 1.200 Height 1,500 mm Number of cycles up to 25 pallets/hour Automatic shrinking process with adjustable shrinkage time Preheating time approx. 30 minutes Operating temperature approx. 200°C - 220°C depending on film thickness

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg

Surface grinder, tool grinder, grinding machine, -Clamping table: 650 x 200 mm -x-axis: 650 mm -y-axis: adjustable 200 mm -max intermediate dimension: 350 mm -grinding wheels: Ø 150/max. 200 mm -Dimensions: 1300/1680/H1460 mm -Weight: 1080 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, mounting plate -Partial mounting plate: 500 x 700 mm -with: fastening material -Dimensions: 700/500/H20 mm -Weight: 8.6 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet -Mounting plate for: control cabinet -Dimensions: 1895/500/22 mm -Weight: 28 kg

optical rotary encoder -Shaft: Ø 15 x 30 mm -Type: TS1508N67 -Number: 3x available -Price: per piece -Dimensions: 68/68/131 mm -Weight: 620 g

Repair and Exchange service Reparatur und Austausch Service Item: Spindle Encoder Type TS5690N1230 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Key data: 299 mm, 620 mm, 150 mm

Technical data of the machine: - Workpiece headstock: MK5 - Tailstock: MK3 - Center height: 150 mm - Center width: 680 mm - Grinding length: 620 mm - Grinding wheel left: 350 x 50 x 127 - Grinding wheel right: 250 x 25 x 127 . Geometry: The machine is completely dismantled up to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the Z and X axes are scraped by hand and restored to a like-new condition. After completion, the machine receives a measurement report according to the manufacturer's specifications Equipment of the machine (standard): • 1 workpiece headstock MK5, swivel • 1 tailstock MK3 • 2 grinding wheel holders • 1 abrasive headstock Ø 127, swivel • 1 hydraulic power unit • 1 set of operating tools and instruction manual The machine and equipment shown in this il ...

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 38 mm -Load capacity: 2500 kg -Number: 3x terminals available -Price: per piece -Weight: 15 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 60 mm -Load capacity: 5000 kg -Number: 2x terminals available -Price: per piece -Weight: 49 kg

Product number: 2847 Type: TSRR-200SLD Serial number: 303 NL 2017 Year of construction: 2017 Content: 200 litres Heating: steam, 111 kg/h Mixing: 10 - 60 RPM Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 1550 x 1250 x 1700 mm Weight: 440 kg With mixer / agitator

Transnorm roller conveyor TS 2800 sorter switch 1980-1250-1150 RA1999 Make: Transnorm Roll width (RB): 1150 mm Nominal/outer width (NB): 1250 mm Length: 1980 mm Diameter rollers: 50 mm distance between rollers: 76 mm Roller conveyor motor: 2x SEW drive motor Angle of the rollers is adjusted pneumatically (see pictures) conveying speed: approx.1,73m/s maximum recommended box/package width: 400 mm Theoretical sorting speed at 600 mm crate length: ca. 4250/h Included: Side guide included on one side Control valve Optionally available: Supports Side guides on both sides Conversion to box width up to 500 mm Barcode scanner Control system (stand-alone unit) System optimization (e.g. replace valves, dual solenoid valve, forward conveyors, frequency converter) for higher flow rate 6000 and more Translated with

USED TETRA PAK STRAW APPLICATOR TSA 21 FOR SALE Item #: Usm-192 Category Straw Applicator Used Tetra Pak Straw Applicator for sale Model: TSA 21, Straw Type: U Shape 200ml Slim, Year of manufacturing 2005, working hours 14300

Power supply unit, DIN rail -Type: TSP 180-124 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg

Power supply unit, DIN rail -Type: TSP 360-124 -Weight: 1.4 kg

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E - CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF - volt. 380/50 - sn 772 - year 2003

Air gun, 2-component gun, multi-function gun, cartridge gun The TS460 XH compressed air gun is designed for 490 ml side-by-side cartridges. It is suitable for applying two-component adhesives and sealants. -for 2K adhesives and 2K sealants -Propulsion: via compressed air -Weight: 2.3 kg

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

proximity switch -Manufacturer: di-soric -Product Type: DCC 3.0V1.0 PSK-K-TSL -Number: 5x switches available Price: per piece -Weight: 0.01 kg/piece

grinding diameter: 4000 mm grinding length: 6000 mm swing diameter: mm clamping length max.: 6000 mm grinding spindle speed: 420 - 1110 U/min grinding wheel peripheral speeds:: 1800 m/min grinding motor: 15 kW grinding wheel size: 760 x 90 x 304,8 mm faceplate turning speed range -stepless-: 3 - 30 U/min drive capacity - workpiece: 15 kW feed range - grinding spindle: - mm/min workpiece weight: 15 + t total power requirement: - kW weight of the machine ca.: ca 30 t dimensions of the machine ca.: ca 13 x 2,6 m Heavy-duty roll grinding machine - workpiece drive - tailstock - coolant system - various steady rests - polishing motor - crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 of used trayshrinkpacker, make KHS/Kisters, type TSP 080V, new 2002. Operating side: right. Siemens S7 controls with Bosch/Rexroth/Indramat Servos. Capacity upto 80 cycles/minute. Originally used to pack 330/355 ml standard (D 66 x H 115/122 mm) beverage cans loose and pre-packed as either 6x3=18 or 6x4=24 on tray + film. Last used for 500 ml PET bottles (D 64 x H 204 mm) as 4x3=12 on tray + film.

PLC control, electronic module, PLC control -Manufacturer: Schneider, PLC control TSX Micro -Type: TSX3710001 -Dimensions: 170/135/H150 mm -Weight: 2.3 kg

amount: 1 STK weight: 5 kg range L-W-H: 380 x 340 x 220 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One used EVG TSD 7 double step welding lines for the production of standard and special truss girders (e.g. decking girders) in large to mid-size series for girders from min 90mm to max 250mm height Upper wire: 5.0mm to 12.0mm, ripped and smooth Lower wires: 4.0mm to 10.0mm Zig Zack wires: 4.0mm to 7.0mm Max length of girder: 12.000mm

Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: KEB, spur gear motor type G 1.2 C DK 63 G 4 /TS140 -Speed: 36 rpm -Power: 0.18 kW -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 345/125/H185 mm -Weight: 12.3 kg

length: 6000 mm width: 2500 mm height: 2650 mm weight of the machine ca.: 7,5 t 20” workshop container - seaworthy Various equipment - Roof hatch Weight approx. 7.5 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader