ts 150 used for sale

General SKU368W1089 LocationBarneveld MakeRegloplas Pressure Working pressure5.8 Bar Main Features Heating (medium)Oil Capacity5.1 KW Temp.150 °C Specified Features - Temperature control unit MaterialMild steel Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating medium:Oil Heating capacity4kW Electric capacity5.1 kW With coolingcheck(without cooling compressor) Temperature150°C Tank capacity8 dm³ With pumpcheck Capacity50 l/min With temperature controllercheck Information Type150KL/4/TB22/1K Mach.No.129113 Year of construction1989 Mounted on wheelscheck With switchcheck Floorspace0,33 x 0,80 m Total height0,93 m Weight54 kgTemperature control unitsRegloplasHeat exchangers > Temperature control unitsBrand > Regloplas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

Behr ST 150 Vertical Shaping Machine -Masch.-Nr: 096, -large stroke: 150 / 175 mm -Tilt adjustment of the ram in both directions: 5 / 8 degrees -Height table / UK ram guide: 260 mm -Rotary table diameter: 340 mm -Longitudinal displacement of the table: 320 mm -3 lifting speeds: 17 / 54 / 108 H/min. -Gr. groove width: 16 / 26 mm -External dimensions approx.: 960 x 1530 x 2030 mm with - Feeds in X and Y (back and forth) -Speed adjustable - Adjustment of rotary table manually

General SKU224X118 MakeAnhydro TypeCH-63 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor1.1 KW Inlet diameter8 mm Specified Features - Spray dryer Spray dryercheck Drying tower dia.900 mm Cylindrical height1000 mm Conical height600 mm OutletDia. 100 mm With rotary atomisercheck With nozzle atomisercheck MakeAnhydro TypeCH63 ATEX No.46030 Year of construction2010 Atomiser dia.63 mm Motor0,7kW, 400V Evaporation capacity13 kg water / h Air heating (electric)check 15kW With cyclonecheck Cyclone sizesø 200 x 600 mm With dust filtercheck Cleaning by air pulsecheck With fancheck Capacity11m³/min Motor1,1kW, 400V MaterialStainless steel 1.4552 Information No.46030 Year of construction2010 Mounted on framecheck With switchgearcheck Floorspace2,5x2,2 m Total height2,9 m ATEX compatiblecheck Extra Specifications- explosion panel wit ...

General SKUR0093 LocationBarneveld Main Features MaterialStainless steel Volume150 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel Open stirring vesselcheck Capacity150 Ltr. Vessel sizesdia 550x800mm Dished bottomcheck Flat top sidecheck Outletdia 15mm With jacketcheck With paddle stirrerVisco Jet Motor2,2 kW 220-240/380-420 Volt Information Makeunknown, manufacturer plate is missing Mounted on legscheck Floorspace0,8x0,8 M Total height2,4 M Weight350 KgStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.

Product Overview: EDA Industries SM 24 FH 150 Description: The EDA Industries SM 24 FH 150 is a high-performance Burn-In Oven System designed for reliability and stress testing of semiconductor devices. This 2018 model is engineered to simulate extreme operating conditions, helping to identify "infant mortality" failures in integrated circuits and power modules before they reach the final consumer. Technical Specifications: - Manufacturer: EDA Industries - Model: SM 24 FH 150 (SM24 / SP40 Series) - Year of Manufacture: 2018 - Application: Semiconductor Burn-in / Reliability Testing / Life Cycle Testing - Max Operating Temperature: 150°C (Standard) - System Type: Thermal Chamber with Electronic Testing Interconnects Physical Dimensions: - Width: ~79.13 in (201 cm) - Depth: ~86.61 in (220 cm) - Height: ~78.74 in (200 cm) - Weight: ~1,800 lbs (816 kg)

CONTROLS   CNC controls FANUC BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1   number of b-axes: 1 WORKING RANGE TURNING   bar diameter (max): 50 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 11 kW   spindle bore diameter: 50 mm   c-axis: yes COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power: 7.5 kW   c-axis: yes   Z-axis travel: 465 mm X/Z SLIDE   tool fixture: Turret   number of tool positions (total): 24   number of live positions: 24   - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: ...

General SKU264S278 LocationBarneveld CEcheck MakeBrabender Technologie KG (D) Main Features MaterialStainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel Metering screws Metering screwcheck Screw diameter75mm Pitch70mm Screw length650mm With hoppercheck Hopper sizes500x500x700mm Inletdia. 200mm (1x), dia. 60mm (1x) Outletdia. 100mm With motor0.37 kW 230-242/380-420 Volt Hopper with flexible wallcheck Information TypeDDW-H32-FW79/2-150 No.976693M21 Year of construction1997 With switchgearcheck Floorspace1,4x0,8 M Total height1,7 M Weight250 KgMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mach ...

General SKU012Y120 MakeDMN Westinghouse TypeAL-150 3C MZC No.022980 Year of construction2002 LocationBarneveld Material Housing materialCast Iron Hard Chromium Rotor materialStainless steel 1.4404 (316L) Main Features MaterialStainless steel/Mild steel Motor0.25 KW Inlet diameter150 mm Specified Features - Rotating valve MaterialMild steel, Stainless steel Rotary valveEasy clean (1x) Rotor diameter170mm Rotor width170mm Number of locks:8 Inletdia. 150mm Inlet flange sizesdia. 285mm Outletdia. 150mm Outlet flange sizesdia. 285mm Installation height± 280mm With motor0,25 KW, 400 Volt (Ex) Rotor speed± 10 Rpm Information ATEX compatiblecheckRotating valvesDMN WestinghouseRotary valves > Rotating valvesBrand > DMN Westinghouse What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any de ...

General SKU001Z007 MakeTerlet No.84 065 Year of construction1984 Mounted on legsVerrijdbaar Main Features MaterialStainless steel Volume150 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 640x590mm, Vlakke bodem Dished top sidecheck With covercheck Outletdia. 25mm Max. temperature100 Degr. C. Motor0,9/1,5 KW, 380 Volt Information LocationBarneveld With switchcheck Floorspace1,2x0,8 M Total height1,5 M Extra Specifications- Scraper stirrer (bottom drive) Technical specs Extra informationFlat bottomStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

Key data: 1500 kN

Ferromatics Milacron Magna T(MTs) 150-450 / Production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 45 mm Injection weight: 215 g Spray pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tiebar spacing: 510x510 mm Size of the clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine – servo motor driven by inverter Central lubricatio ...

Key data: 1500 kN

Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with the Rotary Molding Machine Year of Make: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Spray pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Spar spacing: 0x0 mm Size of the clamping plates: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical Injection Molding Machine with the Rotary Molding Machine Hybrid machine: high-speed, energy-saving and very quiet Air Valve x 5 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear-resistant and resistant to corrosion Rotary table diameter: 1500 mm Rotary table driven by a servo motor, controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83x1.50x4.07 m All offered machines ...

Key data: 1500 kN

Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating Hours: approx. 29,000 in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Spray pressure: 1714 bar Dosing volume: 442 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x470 mm Size of the clamping plates: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6P - Touch Screen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total number of operating hours: 36,714 Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 6600 kg Length/Wid ...

General SKU397X1159 LocationBarneveld CEcheck MakeAllgaier TypeWS-CA-150 Main Features MaterialStainless steel Volume140 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheelscheck Capacity15—140 l. Pan sizesø 700 x 500 mm With sprayercheck (cleaning WIP system) Can be heated by steamcheck With electric heatingcheck With fancheck 2x (Ex) Motorcheck 15kW 400 V (Ex) With dust filtercheck Filter surface6,6 m² MaterialStainless steel 1.4404, Stainless steel 1.4571 (316Ti) Information No.348 Year of construction2010 Total height± 3,5 m Extra SpecificationsMax pressure: :1.2 bar Surface finish Inside: :Electropolished, :Ra ≤ 0.4 µm Outside: :Ra ≤ 1.0 µm Temperatures Design temperature: :100°C Operating temperature: :90°C Fluid bed dryers batchAllgaierDryers > Fluid bed dryers batchBrand > Allgaier What you ...

General SKU244K215 MakeFördertechnik AG Münchenstein TypeFT-150 S, Slewable No.96310-130/17079 Year of construction1996 LocationBarneveld Main Features MaterialStainless steel Height2400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting + tilting machine(1x) Max. weight150 KG Lifting height± 2400mm Mechanical drivecheck Motor400 Volt (Ex) Suitable for product sizes± 800x800mm Information With switchgearcheck Floorspace2,0x1,2 M Total height3,1 M Weight500 KG ATEX compatiblecheckLifting/tilting machinesFoerdertechnikConveying systems > Lifting/tilting machinesBrand > Foerdertechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnev ...

General SKU069A340 Makeunknown Year of construction1996 Mounted on legscheck skid Main Features MaterialStainless steel Volume150 Ltr. Motor1.5 KW Specified Features - Stirring vessel MaterialStainless steel 1.4301 (304) Closed stirring vesselcheck Capacity150 Ltr. Vessel sizesø 500x750 mm Dished bottomcheck Dished top sidecheck With propellor stirrercheck (PRG Warburg, type R-100L-80 (96/14507)) Motor0,75 kW 400 V 690 rpm Speed mixing shaft± 690 rpm Information LocationBarneveld With switchgearcheck Floorspace1,5 x 1,2 m Total height2,1 m Weight350 kg Extra SpecificationsWith lobbe pump make Fristam, type FLFN-75L (motor 1,5 kW, 230/400 Volt) Stirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...

Arburg 1200T 800-150 / Vertical injection moulding machine with the rotary table Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 45 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 80 t Spar spacing: 0x0 mm Size of the clamping plates: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Air Valve x 6 Hydraulic core pull x 6 Control with hot runners Hardened injection unit - Bimetal Rotary table diameter: 1200 mm Kistler Sensor - Tool Pressure Control Machine has been serviced by the authorized service Arburg in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pumps/motor: 22 kW Heating capacity: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before they are sold. It is possibl ...

Key data: 1500 kN

Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by  ...

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

TECHNICAL SPECIFICATIONS Manufacturer: STETTER Description: Scraper plant Type: SW CRS 150 Year of Make: 1993 Theoretical flow rate: 150 cbm/h Current: 115 A Voltage: 220/380 V Cabin weight: 4,400 kg

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 5-150 mm sheet width - max.: 5-150 mm coil weight: 2,0 t coil weight: 2,0 t Belt thickness: 0,2-1,5 mm Belt thickness: 0,2-1,5 mm band speed: 0-20 m/min band speed: 0-20 m/min driving torque: 290 Nm driving torque: 290 Nm table-size: 1500 mm table-size: 1500 mm Control: Siemens-Leicht Control: Siemens-Leicht range L-W-H: 2.000 x 1.500 x 1.900 mm total power requirement: 0,75 kW total power requirement: 0,75 kW weight of the machine ca.: 0,6 t weight of the machine ca.: 0,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 € : 488.96 € : 1 : 25600 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of ...

Races: X: 900 mm Y: 1800 mm Z: 2500 mm

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

Side labeller for flat products (boxes), left-hand model, pneumatically controlled, operating pressure: 4 - 6 bar, (explosion-proof), max. passage width 150 mm, without printing unit, height-adjustable on frame (150 mm).

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm spindle speed:: 2,5-1000 ram: 380x380 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1500 kN, 380 g/PS, 50 mm

Year of manufacture 2005 Clamping force: 150 tons. Screw diameter: 50 mm Operating hours: 117,426 h incl. removal robot: Engel ERC 34/1-E The machine is in good condition, and has been regularly serviced

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : 1520 mm : 300 mm : hydraulisch : 11 kW : 2630 mm : 1000 mm : 2450 mm : 3270 kg : 610 mm : 1520 mm : 5 mm/s : 9 mm/s : 10 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough Kettle Lifter Kemper HK 150Kettle Lifter from Kemper Model HK 150Kemper 125/150Â Height approx. 200cmMore dimensions are on the photosOverview: Werner &, Pfleiderer Kemper HK 150The HK 150 is a professional lift-tipper an indispensable machine in bakeries and confectioneries for dough preparationDrive: Electric, with powerful motor for heavy dough (e.g. rye dough) and intensive kneading processes.

Spiral mixer Kemper SPA 150 usedManufacturer : KemperType : SPA 150150 kg flour 240 kg dough2 clocksstainless steel kettle and spiral with 2 extendable boilers2 x timers automatic 2 x speeds slow and fast with flour dust cover machine can be viewed and tested in our warehouseThe Kemper SPA 150 is a powerful spiral mixer for artisan bakeries and small to medium-sized businesses. It is characterized by:Kneading principle: Two spirals rotating at different speeds for gentle and efficient dough processing.Kneading performance: The 150

Spiral mixer Kemper SP 150 AL completely overhauled Description A completely overhauled spiral mixer Kemper SP 150 AL with 2 extendable stainless steel boilers. The machine has been completely overhauled and repainted. The complete electronics with control cabinet, the timers, the buttons and wiring have been renewed. Manufacturer: Emil Kemper GmbH Type: SP 150 AL Condition: completely overhauled Material: Boiler and spiral made of stainless steel The spiral mixer is completely overhauled Complete electronics (relays, timers and buttons, etc.) are new All V-belts are renewed The

Kemper F 150 ASL overhauled Lifting mixer Description A completely overhauled Kemper F 150 ASL working kneader for max. 240 kg of dough. The machine is equipped with 2 to 7 stainless steel kettles for a maximum of 240 kg of dough each. The lifting kneader has been completely overhauled and repainted, the electrics, the ball bearing and the gears have been renewed. With 2 speeds With 2 timers Automatic (new) With stainless steel lifting arm Per kettle max. 150 kg flour, or 240 kg dough With flour dust Cover Kettle with handle All ball bearings renewed Complete electronics new V-belt new Machine completely new

used extendable boiler for W&, P DK 150 stainless steel â Product description âœ" Manufacturer: Werner &, Pfleiderer âœ" Type: DK 150 âœ" Condition: used, bakery condition - must be thoroughly cleaned before use âœ" The boiler is integrated on a trolley âœ" The trolley is easy to drive and rotate âœ" The boiler can be rotated in all directions on the trolley âœ" Material trolley: Metal âœ" Material cauldron: stainless steel âœ" for max. 240 kg dough âœ" inner ✠inner â ̃ of the cauldron: 98 cm, 56 cm deep âœ" outer of the cauldron: 104 cm, 103 cm high âœ" Stock: 8 pieces

â Product description âœ" Manufacturer: Kemper âœ" Machine type: SP 150 ALH âœ" Condition: used, in working order, bakery condition âœ" With 2 extendable stainless steel kettles âœ" We have many boilers in stock

Boiler lifter Kemper HK 150 for Kemper Kessel -Kettle lifter from Kemper model HK 150- without boiler mount on request we have in stock for Kemper 125/150 height approx. 179cm- dumping height approx. 175cm Details see picture 

Lifting tipper mounts Kemper 125+150 Manufacturer : Kemper Type : Boiler 125 + 150 Bakery condition Details see picture

Motor for Spiral Mixer Kemper SP 150 Extendable Unused Motor for Spiral Mixer Kemper SP 150 Extendable 2 pieces we have in stock Details see picture

Spare parts for Spiral mixer Kemper SP 150 Extendable as seen in the picture is motor unchecked

used spiral mixer Kemper SP 150 ALH Extendable  Manufacturer : Kemper Type : SP 150 ALH 150 kg flour 240 kg dough 2 clocks stainless steel kettle and spiral with 2 extendable kettle 2 x timers automatic 2 x speeds slow and fast with flour dust cover machine can be inspected and tested in our warehouse used bakery machines, kneading machine spiral mixer with fixed stainless steel kettle from Kemper robust and stable, Spiral mixer Kemper SP 150 ALH for the production of high-quality doughs. It can be bread roll doughs, bread doughs, pastry doughs and similar

Conrad drill rig Spoeldrillmachine, suitable for Geothermal drilling., - Machine is from year of construction 2016, - Hours 5,985, - Maintenance carried out by manufacturer, - Fully documented, - Powered by IVECO N45 ENT, 4 cylinder diesel, - Manipulator present, - Remote controllable by means of remote control, - Pull up: 4000 daN, - Pull down 2000 daN, - 4 drill head, bore 100mm, Present at the machine: 40 drill pipes, each 3 meters long (120 meters total) , , Very neat and well-functioning machine, immediately ready for use!, , = More information =, , Type of fuel: Diesel, Year of manufacture: Dec 2016, Model year: 2016, Colour: Blue, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interest ...

Manufacturer : KemperType : SP 150 ALH150 kg flour 240 kg dough2 clocksStainless steel kettle and spiral with 2 extendable boilers2 x timers automatic2 x speeds slow and fast with flour dust coverMachine can be inspected and tested in our warehouseused bakery equipment, kneading machine Spiral mixer with fixed stainless steel kettle from Kemper robust and stable, Spiral mixer Kemper SP 150 ALH for the production of high-quality dough. It can be bread doughs, bread doughs, pastry doughs and similar doughs.Kemper spiral mixers work on 3 zones kneading principle spiral guide rod

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

bushing cut-off , PKO diameter range 16 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 160 mm shaft length under head 125 mm output - pieces/min 150

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg