trumpf spares used for sale

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

working area: 3000 x 1500 mm : 5000 W : 25 mm sheet thickness for stainless steel: 20 mm Sheet thickness aluminum: 12 mm machine weight ab.: 12.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick-change device - Autom. Sheet metal outer edge detection - Position laser diode - progr. Cutting Gas Selection/Pressure Adjustment - Microweld - PMS Plasma Sensors - Sprintlas - ContourLas - AutoLas Plus - Oil spraying device - Autom. Pallet Changer - Work area lighting - Conveyors for small parts/waste - Multi-chamber extraction - Compact dust collector - Automatic switch-off - Safety devices - ToPs 100 lite -RJ 45 network connection - 3.5 floppy disk drive

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

Key data: 165 kN, 6 mm, 1250 mm

The machine was purchased directly from Trumpf in 2015. It was a demonstration machine from 2012, which had previously been used in the Trumpf training workshop (there only a few operating hours). Later, it was used in single-shift operation in the housing production of welding machines. Therefore, only 15700 operating hours. Exclusively in the sheet metal sector, especially sheet steel 1.25 and 2.0mm, occasionally 3mm. No stronger material. No known defects, machine is currently still in use, available from May 26. Reason for sale: Discontinuation of production. The "Compact Edition" of the TP1000 is optimized for a part size of 1250x1250. Larger formats can be done with the "Reset" function, additional tables are necessary. The outstanding advantage of the "Compact" machine is the small space requirement of only 4.13 x 5.84 m. The machine is equipped with almost all availab ...

This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details.

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details.

pressure: 36 t chamfer lenght: 1020 mm distance between columns: 932 mm throat: 150 mm stroke: 120 mm useable dayligth: 295 mm Y-working travel: 10/25 mm/sec Y-rapid travel: 220 mm/sec work height max.: 1150 mm weight of the machine ca.: 2.600 kg dimensions of the machine ca.: 1805x1330x2380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trumpf Type of Machine: Trubend Bending Cell Condition: used A rough list of the components. 1303 - 3 columns/ tool holder 1304 - Rail system with robot arm 1305 - Conveyor belt 1306 - Two operator terminals L1030823 - Enclosure Find more here - / Contact us at -

Laser filter, filter area 30m², capacity 1800 Bm³/h

Cooling unit, chiller, chiller approx. 30 kW

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

Punching capacity: 220 kN laser capacity in Watt: 4000 travel -x axis: 3050 mm travel -y axis: 1550 mm Cutting capacity structural steel: 8 mm Cutting capacity stainless steel: 8 mm Cutting capacity aluminum: 6 mm workpiece weight: 280 kg weight of the machine ca.: 24.000 kg dimensions: 10130 x 8898 x 2328 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC punching machine manufactured in 1995. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 2,500 mm. It is multitool capable and comes with 2 tools in a cassette for commissioning. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.

pressure: 230 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm table width: 200 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec stroke: 365 mm oil volume: 400 ltr. tiltable up to: +/- 10 mm table height: 1050 mm dayligth: 535 mm total power requirement: 30,0 KW weight of the machine ca.: 18.210 kg. range L-W-H: 3700 x 2350 x 3120 mm Equipment: - DELEM - CNC control DA 65 controlled axes : Y1 - Y2 - X - R - Z1 - Z2 - with CNC - crowning - backgauge - WILA hydr. upper tool clamping - hydr. lower tool clamping - Die displacement - front support arms - Various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm

Manufacturer: Trumpf Model: Trumatic L 3050 Year of Manufacture: 2006 Type of Machine : CO2 Laser Cutting Machine Laser Power: 5,000 W Laser Type: CO2 Power Supply: 400V / 50Hz Connected Load: 105 kVA Control Voltage: 24V Required Fuse: 3 x 160 A Compressed Air Connection: 7 to 10 bar Nitrogen Connection: 30 bar Oxygen Connection: 20 bar Blast Operating Hours: approx. 40,000 h Laser Operating Hours: approx. 115,000 h Included: LoadMaster automatic sheet loading and unloading system

Manufacturer: Trumpf Model: TrumaBend V85 S Year of Manufacture: 1995 Type of Machine : Hydraulic Press Brake Maximum Press Force: 850 kN Maximum Stroke: 215 mm Maximum Operating Pressure: 335 bar Machine Weight: 9,450 kg Power Supply: 3 x 400V / 50Hz Rated Current: 22.5 A Connected Load: 14 kVA Control Voltage: 24V Compressed Air Connection: 6 bar Operating Hours: approx. 85,000 h Find more here - / Contact us at -

Manufacturer: Trumpf Model: TruPunch 1000 Year of Manufacture: 2007 Type of Machine : Punch Press Electrical: - Power Supply: 400V / 50 Hz - Connected Load: 14 kVA - Control Voltage: 24V - Required Fuse: 3 x 25 A - Compressed Air: 7 - 14 bar Included with Machine: - Brush table for scratch-free sheet processing - Scrap metal conveyor belt - Note: Tools are not included Find more here - / Contact us at -

Machine – Trumpf TC6000L - Manufacturer: Trumpf - Type: TC - Model: TC6000L 1300-3200W - Year of manufacture: 06/2002 - Operating hours: 109,870 h total / 76,477 h laser on - Laser power: 3,200 W - Punching force: 22 tons - Sheet thickness: Max. 8 mm - Workpiece weight: 200 kg - Control unit: Siemens Sinumerik 840D SheetMaster - Model: SM1606 V110 09 - Year of manufacture: 2003 Trumagrip - Year of manufacture: 2003 Find more here - / Contact us at -

Manufacturer: Trumpf Type: Tru Laser 3040 5000 (5kW laser power) CO2 Working area: 4,000mm x 2,000mm Year of manufacture: 2009 Laser on: 24,146 hours Beam in: 10,319 Bh - Cool Line - High-speed cutting head - The machine has always been meticulously maintained by Trumpf under a maintenance contract and is in very good condition Find more here - / Contact us at -

TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.

TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello all We have the following spares for Wartsila 32 LN Cylinder heads 24 pieces used Connecting rods 12 pieces used Fuel pumps 12 used 1 piece new Pistons 12 pieces used 1 piece new Cylinder liners 12 pieces ueed camshaft pieces 12 pieces used injectors 12 pieces used All of them are dismantled from 2007 built Wartsila 32 LN engine with low running hours and are in really good condition We also have in our warehouse brand new consumable spares for Wartsila 32LN such as: exhaust and inlet valves, valve seats, guides, piston ring sets, main bearings, big end bearings , nozzles , cylinder head gasket sets, anti polishing rings and much more Please contact us at: infofin-marine

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 pcs. rope pulleys for counter weight of a FB 225 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar: max. 75 bar piston stroke: 0 mm revolutions per minute: 0 U/min 2 pcs. available. Price is for 1 pc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

change gear bolt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.