trumpf punching machine used for sale

Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Screening machine large, Terra St used, overhauled

REF-2034 RISCO CONTINUOUS VACUUM SAUSAGE STUFFER Continuous vacuum sausage filling machine Manufacturer: RISCO Model: RS-4003-320SC Year: 1998 Power: 4.5kW Voltage: 400V. 50Hz. Three-phase Weight: 560kg Overall dimensions: 1,000mm width, 800mm length, 1,970mm height

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Key data: 400 mm, 650 mm, 5000 1/min

Technical data: Manufacturer: Spinner Type: TC 600-65 SMCY Year of Make: 2013 Control: Siemens 840D SL ShopTurn Travel: X 275mm, Y +50/-40 mm, Z 700 mm Switch-on hours: 12,838 h Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Max. Rapid Traverse: 15/24 Main spindle Max. speed: 5,000 rpm Spindle passage: 65 mm Chuck size: 210 mm Spindle power: 18 kW Torque: 150 Nm Sub-spindle Max. speed: 6,000 rpm Chuck size: 165 mm Spindle power: 10 kW Torque: 80 Nm Revolver Number of tools: 16 Tool holder: VDI 30 Rotating tools: 16 Max. speed: 6,000 rpm Power (60%): 6 kW Torque (60%): 30 Nm Dimensions and weight Dimensions L/W/H: 2.5m x 1.6 m x 2.0 m Weight: 5,000 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Large panoramic window in the work room Tool  ...

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Auction-ID: A1-43429-119

Auction-ID: A1-43429-100

Auction-ID: A1-43429-113

In steel cage Auction-ID: A1-43429-65

Folder Gluer (folding carton gluer)

Folder Gluer (folding carton gluer)

Ref.-No. 10009-20-1276 Table Laser Designation of the attachment marking laser SAL 22 Manufacturer SH-Made in Germany Model SAL22 Year of construction NEW Compact ALL-in-One table machine for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 110x110 mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300 mm • marking height approx. 110 mm • Working range approx. 390x240mm • Welded construction made of sheet steel • Connection 230V • Air-cooled • Notebook with cable, Windows 10 (German or English) • Dimensions: 670x 430x 700 mm (LxWxH) • Weight: approx. 55 Kg

Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included

Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...

Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Auction-ID: A1-43429-111

Without the exhaust pipes Auction-ID: A1-43429-47

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

It has 3 units, built in 1998

On 2 shelves of shelving Auction-ID: A1-43429-168

Auction-ID: A1-43429-102

Without the exhaust pipes Auction-ID: A1-43429-51

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

Auction-ID: A1-43429-23

Auction-ID: A1-43429-114

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 14 mmIntegrated motor spindle speedMASTER®Drive ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning o ...

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turn ...

Key data: 400 mm

S375G SAMPUTENSILI "CNC" Horizontal Gear Profile Grinding Machine, suitable for the precision grinding of external spur and helical gears and shafts, as well as internal spur and helical gears and splines. The machine has the added capability of grinding worms, rotors, and other screw-type workpieces of similar profile up to 14.76” (375mm) which was factory OEM standard - but delivered at 15.74" (400mm) diameter, and 34.25” (870mm) in length. The machine is also equipped with the optional” on-board CNC” dressing feature, and the on-board CNC” gear inspection system-feature. Serial No. 2376 (New in 2007) This is a first-class, highly versatile gear grinding machine, in superlative” condition throughout, which may be inspected, in running service, at our customer’s plant facility, by appointment. -The machine would require acquisition & adaptation of an appropria ...

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.