135,613 used machines on RESALE, but how to find them? Machine Search
TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.
Manufacturer: Trumpf Model: Trumatic L3030 Type: TC L3030 Laser type: CO2 Laser power: 4,000 W Year of manufacture: 1999 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Compressed air: 6 bar Condition and Availability The machine was in continuous production use until November 2025 and remains powered on.The resonator has been replaced once during its service life. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offered is a high-performance solid-state disk laser. Laser power: 6000W, beam quality: 8mm mrad, wavelength: 1030nm, laser diode rated power: 29kW, control: TRUMPF LaserControl S. Equipped with internal heat exchanger, Grundfos pressure pump CRI10, integrated safety circuit, 2-phase fiber optic connection box. Weight: approx. 2000kg, overall dimensions X/Y/Z: approx. 1750mm/850mm/1370mm. Inspection possible by arrangement.
CNC hydraulic press brake Type: TruBend 5130 Manufacturer: Trumpf Year: 2007 Controled axis: X,R,Z1,Z2,Y1,Y2 Pressing force: 130 t Working length: 3000 Stroke: 445 mm Working pressure: 300 bar Machine weight: 10900 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.
Key data: 120 t, 3110 mm
Inv. Num. : 9174 Type: TruBend 3120 Producer: Trumpf Created: 2007 Parameters: Compressive force: 120 t Maximum bending length: 3110 mm Distance between frame walls: 2690 mm Machine height: 2330 mm Machine length: 3600 mm Machine width: 1750 mm Machine weight: 8300 kg
Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details.
This 4-axis TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 2 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details.
This 6s TRUMPF TrumaBend V50 was manufactured in 2000. It features a work length of 1270 mm and a press force of 50 tons. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V50 press brake we have for sale. Contact us for further details.
This 6s TRUMPF TrumaBend V230 was manufactured in 1999. It features a press force of 230 tons and a work length of 3000 mm. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V230 press brake we have for sale. Contact us for further details.
Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...
Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...
This 4-axis TRUMPF Trumatic Trumabend V130 was manufactured in 1998. It features a press force of 1300 kN and a bending length of 3060 mm. The machine has a weight of 10,650 kg and a throat depth of 410 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF Trumatic Trumabend V130 press brake we have for sale. Contact us for further details.
pressure: 170 t chamfer lenght: 4080 mm distance between columns: 3680 mm column arm: 410 mm dayligth: 385 mm stroke: 215 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 200 mm table height: 1050 mm Number of working hours: 25.430 h oil volume: 350 l total power requirement: 29 KVA weight of the machine ca.: 16.450 kg. range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency ...
Manufacturer: Trumpf GmbH, Germany Model: TruLaser 5040 Year of Manufacture: 2007 Type: CNC laser cutting machine Technical Specifications - Laser output power: 5,000 W - Mains voltage: 400 V / 50 Hz - Connected load: 105 kVA - Control voltage: 24 V - Required fuse protection: 3 x 160 A - Compressed air connection: 7 to 10 bar - Nitrogen connection (N2): 30 bar - Oxygen connection (O2): 20 bar CO2 Find more here - .ucymachines/ Contact us at - sales@ucymachines
A Trumpf CNC laser cutting machine is offered for the precise cutting of mild steel, stainless steel and aluminum sheets. Working range X/Y: 4000mm/2000mm, Z-axis travel: 115mm, laser power: 5000W, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Including various peripheral equipment and accessories. Overall dimensions X/Y/Z: approx. 11500mm/5500mm/2300mm, weight: approx. 18t. Documentation available. An on-site inspection is possible.
pressure: 125 t chamfer lenght: 3000 mm distance between columns: . mm Control: CNC type: DA 65 R stroke: 200 mm safety distance: 136 mm rapid traverse - down: 100 mm/sec rapid traverse - up: 92 mm/sec working feed: 1-10 mm/sec throat: mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
table length: 3000 mm table width: 1500 mm burner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mm y-travel: 1510 mm z-travel: 100 mm control: Bosch type: CC320 Trumagraph mm total power requirement: kW weight of the machine ca.: 15,2 t dimensions of the machine ca.: m Laser TLF 2600 turbo Trumpf Machine No.: 110212 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch T ...
pressure: 120 t chamfer lenght: . mm distance between columns: 2550 mm stroke: 200 mm total power requirement: 13,2 kVA Number of working hours: 2500 h workpiece: 1 Satz Standart workpiece: 1 Satz Standart Prisma Number of strokes: 11000 total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
A Trumpf laser cutting system with automatic Trumpf Liftmaster is offered. Laser power: 5000W, laser type: Trumpf TruFlow 5000 CO₂ laser, wavelength: 10.6µm, working area X/Y: 3000mm/1500mm, Z-axis travel: approx. 115mm, max. table load: approx. 900kg, max. simultaneous speed X/Y: approx. 300m/min, max. sheet thickness mild steel/stainless steel/aluminum: approx. 25mm/20mm/12mm, operating hours (as of 12.06.2025): approx. 74181h, max. sheet format LiftMaster: approx. 3000mm/1500mm, max. LiftMaster load capacity: approx. 917kg, max. LiftMaster sheet thickness range: 20mm-25mm. Including peripheral equipment and accessories. Machine dimensions X/Y/Z: approx. 11250mm/4600mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible.
Manufacturer: Trumpf Model: TruArc Weld 1000 Year: 2023 Condition: Used Stock number: 9392 Operating hours: 20 h Maximum arm reach: 1300 mm Number of axles: 6 pieces Source: Fronius TPS 320i C PULSE Rated current: 30 A Operating voltage: 24 V Machine weight: 2980 kg Height: 2818 mm Width: 2454 mm Length: 3605 mm The offer includes:, suction, Universal robot UR10e, Work table, Retractable partition wall, Linear axis, Protective cabin, Robot welding torches,
pressure: 100 t chamfer lenght: 3050 mm distance between columns: 2550 mm total power requirement: 20 kW weight of the machine ca.: 7.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for ...
CO2 laser cutter Manufacturer: Trumpf Model: TruLaser Cell 7040 Type of Machine: TruLaser Cell 7040 Year of Manufacture: 2007 Laser Power: 5000W Beam ON Hours: 9,039 System ON Hours: 59,226 Find more here - .ucymachines/ Contact us at - sales@ucymachines
pressure: 230 t chamfer lenght: 3060 mm distance between columns: 2690 mm Stroke: 365 mm Control: DELEM DA 65 throat: 410 mm dayligth: 535 mm dimensions: 3660 x 2310 x 3100 mm machine weight ab.: 17.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R ax ...
pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface ...
This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details.
Manufacturer: TRUMPF Model: TruMatic 7000-1300 Type of machine: Punch and laser cutting combination machine Year of manufacture: 2009 Technical Specifications: - Operating hours, machine: 53,608 h - Operating hours, laser on: 48,375 h - Operating hours, beam on: 9,876 h (as of 23.10.2017) - Laser power: 4000 Watt - Max punching force: approx. 220 kN - Working area, laser operation: approx. 2540 x 1280 mm - Working area, punching operation: approx. 2540 x 1370 mm - Control system: Bosch MTX compact - Max sheet thickness: 8mm - Floor space required: approx. 7950 x 6700 mm - Machine weight: approx. 23,000 kg - Total connected load: 87 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Key data: 170 t
Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,
Key data: 85 t, 2000 mm
Manufacturer: Trumpf Model: TrumaBend V 850 Year: 2005 Condition: Used Stock number: 9488 Operating hours: 122000 h Compressive force: 85 t Maximum bending length: 2000 mm Stroke: 215 mm Machine weight: 7300 kg
plate thickness: 15 mm Maximum Chamfer Lengths / Maximum Chamfer Heights Maximum chamfer length for steel 400 N/mm² 15 mm Maximum chamfer height for steel 400 N/mm² 10.6 mm Maximum chamfer length for steel 600 N/mm² 9 mm Maximum chamfer height for steel 600 N/mm² 6.4 mm Maximum chamfer length for steel 800 N/mm² 6 mm Maximum chamfer height for steel 800 N/mm² 4.2 mm Radii Minimum radius 55 mm General Working speed (max.) 2 m/min Rated power consumption 2600 W Sheet metal thickness 4 mm - 160 mm Dimensions Length 554 mm Height 361 mm Weight Weight 16.5 kg Translated with DeepL.com (free version) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: 25 mm Sheet thickness: max. 25 mm Max. bevel length: 10 mm (for steel with a tensile strength of 400 N/mm²) Bevel angle: 30° Power: 2,000 W Voltage: 220 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 400 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC ModEva 10 S total power requirement: 47 kW weight of the machine ca.: 30.400 kg dimensions of the machine ca.: 6000x3000x3450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Impressions=0 m, Condition= New , Availability= 2026-07-07, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) DETAILS : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm
Impressions=0 m, Condition= Very Good , Availability= 2026-08-20, 2026 Revision Max Speed Rating (Sheets / Hr) 9,000 / hour Substrate types (Paper / Board / Corrugate) Paper / Board Quick Action Plate Clamps Centre Line System Yes Stripping Station: Yes Blanking Station: No Oil heater with timer Yes Quick-lock Yes Pre-Make-Ready devices Chase changer Very good condition Immediately available
High-performance pneumatic embossing machine Pneumatic embossing machines allow the reproduction of embossing designs on various materials such as leather, plastic, synthetics, non-woven fabrics, flock, and others using pressure and temperature. This can be used for signs, logos, decorations, or lettering. By branding your products, you can strengthen customer loyalty to the guaranteed quality, aesthetics, and durability they associate with a particular brand or logo. The machine is equipped with: - Temperature control - Cycle time control - Belt feed length control - Clamping force control - Manually extendable/retractable table The machine is in perfect, like-new condition.
<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>
SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer
The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons
3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...
Type R-RP630 Working width 630 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 20,25 kW Motor for first unit 11 kW Motor for second unit 7,5 kW Feeding motor 1,5 kW Lifting motor 0,25 kW Diameter of first roller 190 mm Diameter of second 190 mm Abrasive belt size 650x1920 mm Working air pressure 0,6mpa Volume of dust collection device 8000 m3/h Transport dimensions 1900x1200x2100mm Weight 1200kg
Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-110 mm Feeding speed 6-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2100mm Weight 3300kg
Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm ...
Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg
maximum number of results exceeded
please refine your search
