trumpf punching machine used for sale

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible.

TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...

Manufacturer: Trumpf TYPE: TC L 2530 Year of Make: 2000 Working space / travel: 2580 x 1305 x 115 Weight: 8450KG Automation: Plate changer Laser: CO2, 2400W Strahlein: 29,000 hrs Laserein: 41,000 hrs Footprint: 6,500 x 4800 Accessories: Top ́s lite Plate changer Works flawlessly

A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027.

This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information.

Trumpf TruLaser 1030 - Laser Cutting Machine - B&R Automation PC 820 CNC control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of construction 2010 Technical data Working Range: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Max. material thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminum: 6 mm Speed: - Max. cutting speed: 40m/min - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracies: - Smallest programmable travel dimension: 0.001 mm - Position deviation: ± 0.1 mm/m - Average position spreading width: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 μm - Power stability: ± 2% - Power distribution: TEM00 Compressed air consumption: - Standard cutting edges: 333 l/min - Pneumatic cutting: 500 l/min Electrical data: - Drive type: maintenance-free three-ph ...

This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, its ideal for precise tube cutting. Contact us for more information about this machine.

This 3-axis TRUMPF TruLaser 1030 was manufactured in 2011, featuring a robust fiber laser, TruDisk 2001, with a 2 kW output and a maximum material thickness capacity for mild steel at 25.0 mm. It operates with a SIEMENS SINUMERIK 840D control and can handle a maximum workpiece weight of 720 kg. If you are looking to get high-quality cutting capabilities, consider the TRUMPF TruLaser 1030 machine we have for sale. Contact us for more information.

This TRUMPF TruLaser Cell 7040 was manufactured in 2015. It features a large working range with dimensions of 4000x2000 mm and a Z-axis height of 750 mm. Equipped with a powerful TruFlow 4000 Watt CO2 laser, it excels in both thin and thick material cutting. Additional features include CNC automatic scanning, height detection, and a Siemens 840D control system. Consider the opportunity to buy this TRUMPF TruLaser Cell 7040 CO2 laser cutting machine. Contact us for more information.

This 3-axis TRUMPF TruLaser 5030 + LiftMaster was manufactured in 2010. It features a watt CO2 resonator and handles a maximum sheet size of 3000x1500mm. The system includes a LiftMaster aIf you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 machine we have for sale. Contact us for more information.

This 3-axis TRUMPF TRULASER 3030 FIBER was manufactured in 2013. A robust fiber laser cutting machine with a 3 KW power capacity, it features a large working area of 3000 mm x 1500 mm. It has been well-maintained by TRUMPF, ensuring reliability and precision. A great opportunity to buy this TRUMPF TRULASER 3030 FIBER machine we have for sale. Contact us for further details regarding this fiber laser cutting machine.

This TRUMPF TruLaser 1030 laser cutting machine was manufactured in 2011. It features a CO2-Laser TruCoax 2500 with radio-frequency excitation, integrated chiller unit, and a fully automatic pallet changer. Ideal for high precision processing, it includes a 7.5 lens cutting head with height regulation and sheet edge detection. A robust choice for any shop floor with its comprehensive safety features and easy programming capabilities. For more information about this laser cutting machine, please reach out to us.

Trumpf Trumatic laserpress 600L-1600 Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Power: 2400 Watt Control: Siemens Sinumerik 840D Longitudinal travel X-axis: 3050 mm Cross travel Y-axis: 1750 mm Max cuttingthickness in steel: 8 mm Length: 8400 mm Depth: 7800 mm Weight: 22,5 ton Loading System: yes, SheetMaster

This TRUMPF Trumatic L6050 was manufactured in 2006. A robust laser cutting machine featuring a SIEMENS SINUMERIK 840D controller, it handles a maximum workpiece weight of 1.900 kg. It efficiently cuts through mild steel up to 20 mm, stainless steel up to 15 mm, and aluminium up to 10 mm. Ideal for large-scale operations with a working area of 6.000 x 2.000 mm. For more information about this laser cutting machine, please reach out to us.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine.

This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information.

Trumpf TruLaser 5030 with double tower storage system - laser cutting system - Working area: 3000 x 1500 mm - Laser power: 5000 W - incl. LiftMaster Compact & TruStore 3030 - Year of construction 2013 Facilities - Working area: 3000 x 1500 mm - Closed machine frame - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drive - Closed beam guidance via optical cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - TruDisk power supply via the machine - Longitudinal conveyor belt - Work area lighting - Position laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Trumpf Laser - LLK according to standard layout (laser right next to the machine) - Laser cooling unit (water-air) - Excitation ...

TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z  ...

Standard equipment: - Sturdy C-frame - Safety light barriers - Coordinate guidance with integrated Linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming option - Mono tool holder 360 rotation for all tools - Programmable hold-down device - Multi-tool drive - Punched slug extraction - Brush tables - Parts chute 200 x 200 mm Part sorting in 2 containers - NC-controlled, digital, maintenance-free three-phase AC drives - Network interface RJ34 - 3.5 Floppy Disk Station - Graphics programming TOPS 2000 -

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

Accessories - Machine frame with Y-boom and integrated laser unit - Laser unit: CO2 laser TruFlow4000 High-frequency excited - Maintenance-free turbo centrifugal blower - Reflecting telescope - Refrigeration unit - Position laser diode - Laser power control - Logbook function - Drives: Maintenance-free three-phase servo motors - Lighting under the boom - Magnetic coupling for processing head - Head detection - AutoLasPlus - Hanging control panel - TFT color screen - Teachpanel - Network connection RJ 45 Machining Method: - Laser cutting - Dynamic cutting head (155mm) - Cutting head (240mm) -

Standard equipment: machine - Coordinate guidance for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing the claws - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - Nitro Line - FastLine - Express cylinder laser parts - Cinder cone detection TRUMP Lasers - Solid-state laser TruDisk 3001 with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function cutting head - Solid state laser compact cutting unit - Control Line punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / r ...

Standard equipment: - Hi-Las high-pressure cutting - Laser cutting head with 5 lens - Laser cutting head with 7.5 lens - Cutting head quick-change device - Autom. Sheet metal outer edge detection - Position laser diode - progr. Cutting Gas Selection/Pressure Adjustment - Microweld - PMS Plasma Sensors - Sprintlas - ContourLas - AutoLas Plus - Oil spraying device - Autom. Pallet Changer - Work area lighting - Conveyors for small parts/waste - Multi-chamber extraction - Compact dust collector - Automatic switch-off - Safety devices - ToPs 100 lite -RJ 45 network connection - 3.5 floppy disk drive

Module was changed because a PCSS conversion took place on the machine and therefore this module no longer fits. Fully functional.

PCSS for conversion of the machine from PCSS-F to PCSS-A. Small restriction: When the machine was started up after a long standstill, the reference run had to be repeated several times. After a successful homing run, the part works without any problems.

This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details.

This 3-axis TRUMPF TruLaser 2030 was manufactured in 2008. It features a TruCoax3200 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 2030 machine we have for sale. Contact us for more information.

This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine.

Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours

Trumpf Servo Amplifier New Part

Manufacturer: Trumpf Type of Machine: Trubend Bending Cell Condition: used A rough list of the components. 1303 - 3 columns/ tool holder 1304 - Rail system with robot arm 1305 - Conveyor belt 1306 - Two operator terminals L1030823 - Enclosure Find more here - / Contact us at -

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm

6 axis Type of controll tasc 6000 Power (ton) 320 Length ( mm) 4420 Depth groove ( mm) 420 Passage between the couloumn (mm) 3680

Trumpf TKF 103 welding edge shaper. 220 Volt under electricity ready for use Special price

Trumpf cutting head 3.75 inch Trump ID: 911218 / 1261653 -used cutting head, technically and visually in very good condition suitable for Trumpf L3030/3050/3530/4030/4050/6030/6050

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 3000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component D1. Machine concept The TruPrint 3000 is a universal medium format press with external parts and powder management for industrial production Complex metallic components by means of 3D printing. Through your large construction volume, it offers a high degree of flexibility in terms of Size, number and geometry of each application. Bcu70Qrgxc Specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals i ...

We offer a highly productive 3D printer for industrial series production Trumpf TruPrint 5000 The 3D printer has already been dismantled by the manufacturer Disassembly logs are available as well as functional logs that prove that the machine was in operation before dismantling All axles are professionally secured The machine can be transported on a normal standard truck Faster to a high-quality 3D component The highly productive, semi-automated TruPrint 5000 3D printing system makes you fit for industrial series production. With features such as optional 500 °C preheating and Fullfield Multilaser equipment with three 500 watt TRUMPF fiber lasers, you are well equipped for highly demanding industrial applications. The machine manufactures high-quality components made of different metallic materials quickly and reliably – and at the same time meets the high quality stand ...

EHT TRUMPF TruBend 8500-60 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine with a high press force of 500 tonnes is designed for economical machining of hard materials with a maximum length of 6050 mm. The robust, internal stress-free design combined with a powerful hydraulic system ensures the achievement of the best bending results, even during the most intensive challenges. All process parameters are programmed in CYBELEC CNC control, whose intuitive interface allows advanced machining programmes to be created in just a few steps. The TRUMPF TruBend 8500 CNC hydraulic press brake weighs 60 tonnes. Technical specifications of the EHT TRUMPF TruBend 8500-60 press brake - CNC controller: Cybelec ModEva 10S - maximum press force: 500 t (5000 kN) - maximum bending length: 6050 mm - X-axis stop range ...

EHT TRUMPF TruBend 8230-40 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine, distinguished by its high productivity and excellent precision, is used for the economical machining of workpieces with a maximum length of 4050 mm. The rigid, internally stress-free design combined with a press force of 230 tonnes ensures excellent bending results, even during the most demanding challenges. The operator, in turn, has at his disposal a convenient foot switch and an intuitive CYBELEC CNC control, in which advanced machining programmes are created in just a few steps. The TRUMPF TruBend 8230 CNC hydraulic press brake weighs 18100 kg. Technical specifications of the EHT TRUMPF TruBend 8230-40 press brake - CNC controller: CYBELEC ModEva 10S - number of axes: 5 (X, X1, R, Z1, Z2) - maximum press force: 230 t (2 ...

Welding edge shaper Offer number: 20120 Make: TRUMPF Type: TKF 103 Machine Number: 454106 Built: ca.1992 Technical data: min. / max. material thickness 3 - 25.0 mm max. bevel length steel 400N/mm2 10 mm max. bevel length steel 600N/mm2 8 mm max. bevel length steel 800N/mm2 5 mm Working speed approx. 2.5 m/min Stroke number 400 rpm Drive 400 V / 2000 Watt Space requirement approx. W 550 x D 200 x H 300 mm Weight approx. 13 kg

TRUMPF TruDisk 3006 6C laser source was built in 2016 in Germany by TRUMPF Laser GmbH. This extremely versatile device enables a wide range of industrial machines to be supplied with a high-quality 3 kW laser beam. The beam has many applications in modern industry. It can be used to both weld and cut sheet metal made of, e.g. steel, copper, brass and highly reflective materials. Active laser power control guarantees 100% constant power over the entire service life of the device, regardless of ambient conditions. All components, i.e. beam guide, current supply, cooling system and control system, are of modular design. They have been optimally adapted to each other inside the compact housing. The small size of the housing also enables the device to be easily integrated with, e.g. robotic systems. All this makes the offered TRUMPF 3006 laser resonator extremely reliable and robust under  ...

table length: 3000 mm table width: 1500 mm burner heads: 1 laser capacity in Watt: 2000 table:: 2 x-travel: 3010 mm y-travel: 1510 mm z-travel: 100 mm control: Bosch type: CC320 Trumagraph mm total power requirement: kW weight of the machine ca.: 15,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

220 V, 9.6 A, 2000 W MAXIMUM CHAMFER LENGTHS MAXIMUM CHAMFER LENGTH STEEL 400 N/MM² 15 mm MAXIMUM CHAMFER LENGTH STEEL 600 N/MM² 9 mm MAXIMUM CHAMFER LENGTH STEEL 800 N/MM² 6 mm RADII SMALLEST RADIUS 55 mm GENERAL WORKING SPEED 2 m/min STROKE RATE AT NOMINAL LOAD 370 1/min RATED POWER 2600 W SHEET THICKNESS 4 mm - 160 mm WEIGHT WEIGHT WITH HANDLE, WITHOUT CABLE 16.5 kg As good as new. Condition

Control unit, control panel, control panel, control unit, keyboard, screen, control -Foot switch comes from a Trumpf punch type Sunimat 400 -Dimensions: 280/140/H150 mm -Weight: 4.4 kg

Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² -220 V 1800 W -470 strokes/min -Weight: 15 kg