trumpf plasma used for sale

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: diffuser Hypertherm 020607 -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available -Price: complete -Total weight: 0.2kg

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Auction-ID: A1-41275-250

Auction-ID: A1-45411-106

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Nominal Input Strength: 29A Rated input power: 19 KVA Open-circuit voltage: 280V Output Current Setting: 30-120A Rated output voltage: 128V Cyclic duty cycle: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact welding (arc formation): Yes

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

2015, machines have been put away working and have had annual inspections

Plasma cutting machine; max. cutting thickness 20 mm; adjustable amperage: 20 - 40 amps; IGBT technology; Function: Plug for CNC control; accessories and protective cover included; unused and in the original packaging

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Rated power: 9.2 KVA; Rated current: 14 A; No-load voltage: 256 V; Output current adjustment: 20-60 ; Rated output voltage: 104 V; Max cutting thickness: 20 mm; Cyclic duration factor: 60%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6094

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

Equipped with Rated Input Voltage: 1P AC380V ±15% 50/60Hz; Rated input strength: 14A; Rated input power: 9.2 KVA; Open-circuit voltage: 256V; Output current setting: 20-60A; Rated output voltage: 104V; Cyclic duty cycle: 60%; Efficiency: 70%; Insulation class: F; Protection class: IP21; Welding by contact (arc formation): Yes; Unused in box

2011 & 2016, machines have been put away in working order and have had annual inspections

Equipped with F2100B control and Conti-Weld Cinti-Pac 105NH power source, usable table size approximately 2700x1450mm, total size approximately 3500x2250x1500mm.

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Equipped with mains voltage: 415 V AC ±15 %, 3-phase; Frequency: 50/60 Hz; rated power: 19.4 kVA; output current: nominal 120 A; duty cycle 60%; Efficiency: 0.85; IP23 degree of protection; cutting up to approx. 35mm; internal air pump; Transport 655x385x625mm 35kg; Unused in box

Equipped with 12500 W; 5m; Maximum power 120A; Unused in box

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

CNC Plasma Cutter, Plasma Cutting System, Portable Plasma THC, Large Format portable plasma cutting system / oxyfuel cutting machine large format Working area 3000x1500mm without plasma cutter With height compensation THC Software StarCAM Machine Voltage Signal phas 220V ,50HZ Plasma power Voltage 380V 3 Phase,50HZ Cutting mode Plasma+Flame Effective cutting range(mm) 1500mm×3000mm Cutting speed(mm/min) 50-3500mm/min Rotational Speed 0-5000mm/min Plasma cutting thickness According to models Moving precision ±0.2mm/m Cutting system Fangling F2100B THC Fangling F1620 Software StarCAM Total weight(kg) 150kg Emergency stop Yes Working temperature -5~45°C Relative humidity

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

2015, machines have been put away working and have had annual inspections

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Inv. Num. : 6794 Type: 3015 Producer: BODOR Created: 2023 Parameters: Laser power: 12 kW Working table length: 3000 mm Working table width: 1500 mm Machine weight: 9000 kg

Inv. Num. : 6924 Type: Roto Mini 1100 Producer: Nessap Created: 2018 Parameters: Max. working length: 1100 mm Working diameter: 500 mm Power: 80 A Maximum cutting thickness: 8 mm Equipment: Anti-collision system Extraction of the flue gas inside the cut pipe Cover of the X-axis with protective bellows Extendable ashtray A few clues

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture. The devices are 9.5" wide. In some pictures, both are depicted.

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...