trumpf plasma used for sale

Laser filter, filter area 30m², capacity 1800 Bm³/h

CNC punching machine manufactured in 1999. This TRUMPF TRUMATIC 500 features a maximum punching force of 220 kN and a working area of 3,000 mm by 1,600 mm. It is equipped with a Bosch control system and is multitool capable. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 500 machine we have for sale. Contact us for further details.

Cooling unit, chiller, chiller approx. 30 kW

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

Trumpf TruBend Cell 5000Year of manuf. : 2018 Control : ____________Description:Technical dataYear of manufacture:2018Pressing force approx.:3200 kNFolding length approx.:4420 mmControl system:TASC 6000Projection:420 mmFree upright clearance approx.:3680 mmUsable installation height approx.:615 mmMachine weight approx.:23400 kgEquipment:- Sturdy machine frame:- Press beam, stress relieved with high bending strength:- Spherical bearing of the press beam (inclined position):- Electro-hydraulic top drive with 4-cylinder technology:- Optical set-up and positioning aid:- Generous edge clearance:- Flat front covers:- Block hydraulics:- Electronic pressure compensator:- Measuring system with glass scale and deflection compensation:- Hydraulic oil in the machine (lifetime lubrication):- Oil cooler:- Control cabinet cooling via air-to-air heat exchanger:- Modern machine designExtended equi ...

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm

A CNC punching machine Trumpf in medium format including SheetMaster, ToolMaster and GripMaster is available. Punching force: 220kN, max. sheet thickness: 8mm, travel X/Y: 2535mm/1280mm, max. workpiece weight: 200kg, feed rate X/Y: 100m/min/60m/min, simultaneous: 116m/min, stroke rate punching/marking: 1200/min/2800/min, C-tool rotation: 330rpm. Machine dimensions X/Y: approx. 6800mm/6100mm, weight: approx. 15000kg, operating hours: approx. 68000h. Documentation available. An on-site inspection is possible.

A hydraulic CNC punching machine Trumpf with rotation is available. Punching force: 220kN, max. sheet thickness: 8mm, travel path X/Y: 2535mm/1280mm, max. workpiece weight: 200kg, feed rate X/Y: 100m/min/60m/min, simultaneous: 116m/min, stroke rate punching/marking: 1200/min/2800/min, C-tool rotation: 330rpm. Machine dimensions X/Y: approx. 6800mm/6100mm, weight: approx. 15000kg, operating hours: approx. 31000h. Documentation available. An on-site inspection is possible.

Manufacturer: Trumpf Model: Trumatic L 3050 Year of Manufacture: 2006 Type of Machine : CO2 Laser Cutting Machine Laser Power: 5,000 W Laser Type: CO2 Power Supply: 400V / 50Hz Connected Load: 105 kVA Control Voltage: 24V Required Fuse: 3 x 160 A Compressed Air Connection: 7 to 10 bar Nitrogen Connection: 30 bar Oxygen Connection: 20 bar Blast Operating Hours: approx. 40,000 h Laser Operating Hours: approx. 115,000 h Included: LoadMaster automatic sheet loading and unloading system

Manufacturer: Trumpf Model: TrumaBend V85 S Year of Manufacture: 1995 Type of Machine : Hydraulic Press Brake Maximum Press Force: 850 kN Maximum Stroke: 215 mm Maximum Operating Pressure: 335 bar Machine Weight: 9,450 kg Power Supply: 3 x 400V / 50Hz Rated Current: 22.5 A Connected Load: 14 kVA Control Voltage: 24V Compressed Air Connection: 6 bar Operating Hours: approx. 85,000 h Find more here - / Contact us at -

Manufacturer: Trumpf Model: TruPunch 1000 Year of Manufacture: 2007 Type of Machine : Punch Press Electrical: - Power Supply: 400V / 50 Hz - Connected Load: 14 kVA - Control Voltage: 24V - Required Fuse: 3 x 25 A - Compressed Air: 7 - 14 bar Included with Machine: - Brush table for scratch-free sheet processing - Scrap metal conveyor belt - Note: Tools are not included Find more here - / Contact us at -

Machine – Trumpf TC6000L - Manufacturer: Trumpf - Type: TC - Model: TC6000L 1300-3200W - Year of manufacture: 06/2002 - Operating hours: 109,870 h total / 76,477 h laser on - Laser power: 3,200 W - Punching force: 22 tons - Sheet thickness: Max. 8 mm - Workpiece weight: 200 kg - Control unit: Siemens Sinumerik 840D SheetMaster - Model: SM1606 V110 09 - Year of manufacture: 2003 Trumagrip - Year of manufacture: 2003 Find more here - / Contact us at -

Manufacturer: Trumpf Type: Tru Laser 3040 5000 (5kW laser power) CO2 Working area: 4,000mm x 2,000mm Year of manufacture: 2009 Laser on: 24,146 hours Beam in: 10,319 Bh - Cool Line - High-speed cutting head - The machine has always been meticulously maintained by Trumpf under a maintenance contract and is in very good condition Find more here - / Contact us at -

TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.

TRUMPF laser optics or an optical/focusing module for a CO₂ industrial laser. In your photos you can see the TRUMPF lettering, the ZnSe designation on the label and two ports, which goes well with a cooled or rinsed optical unit. ZnSe stands for zinc selenide, a typical material for CO₂ laser lenses and windows. Comparable TRUMPF spare parts and accessory pages carry exactly such ZnSe lenses/protective windows for CO₂ laser optics.

Unused Consisting of; 18x Trumpf” TruPlasma VHF 3000-10/40, 18X Trumph” truPlasma Match 1010/40 Auction-ID: A1-43459-31

Auction-ID: A1-45188-3

TRUMPF TRUMATIC L 2530 – CNC laser cutting system (CO₂ laser) • Manufacturer: TRUMPF • Model: TRUMATIC L 2530 • Machine type: CNC laser cutting machine (CO₂ laser) • Design: Flatbed laser cutting machine with automatic changeover table • Working range: approx. 2,500 × 1,250 mm • Max. sheet format: 2,500 × 1,250 mm • Laser power: typically 2,000–3,000 W (depending on model) • Control: TRUMPF CNC control with control panel • Enclosed work area with viewing windows • Automatic changing table • Integrated extraction / connection to filter system • Side control cabinet and power unit • Cooling unit (Riedel) set up separately • Material support with spiked / slat table Electrical connected loads (according to the type plate of the cooling unit) • 400 V • 3 Ph • 50 Hz Dimensions laser system (approx.) • Length: 6,500 mm  ...

EINSTELUNG TAS 42 A – Sheet Engraving Machine General data: Manufacturer: Einstelung Model: TAS 42 A Machine type: Sheet engraving machine Power supply: 380 V / 50 Hz Maximum speed: 1000 rpm Weight: approx. 700 kg Dimensions (L x W x H): approx. 1200 x 700 x 2400 mm Description: Industrial engraving machine designed for marking and engraving sheet materials. The machine operates at speeds up to 1000 rpm and is suitable for precision engraving applications in industrial environments. Auction-ID: A7-45351-37

TRUMPF LiftMaster – TruLaser 3030/3530/5030 Max load: 900 kg Sheet metal format: 2000×1000 to 3000×1500 mm Max thickness: 25 mm (20 mm with rake) Vertical stroke: 1180 mm Transfer height: 840 mm Accuracy: 20 mm / 3000 mm Weight approx.: 3700 kg Compressed air: 7–14 bar · 13.5 Nm³/h Engines: 3.0 kW + 0.37 kW + 0.75 kW Suction force: 1230 N Trolley: 3000 kg · H stack 200 mm Auction-ID: A1-44765-1203

TRUMPF TruLaser 3530 Work Area X: 3000 mm | Y: 1500 mm | Z: 114 mm Max X Displacement: 3104 mm | Y: 1580 mm Max thickness: 20 mm Laser TruFlow 3200: 3200 W TruFlow 4000: 4000 W Performance Max acceleration: 15 m/s² Positioning speed: 120 m/min Simultaneous speed: 170 m/min Positioning accuracy: ±0.1 mm Dimensions & Weight Approx. 9300 × 4600 × 2000 mm Weight: 11,500 kg Order TRUMPF CNC (SIEMENS SINUMERIK 840D base) Electric 73–88 kVA Fuses: 125–160 A Compressed air: 31–42 Nm³/h Table size: 3000x1600 mm Auction-ID: A1-44765-1202

TRUMPF TRUMATIC L 2530 – CNC laser cutting system (CO₂ laser) • Manufacturer: TRUMPF • Model: TRUMATIC L 2530 • Machine type: CNC laser cutting machine (CO₂ laser) • Design: Flatbed laser cutting machine with automatic changeover table • Working range: approx. 2,500 × 1,250 mm • Max. sheet format: 2,500 × 1,250 mm • Laser power: typically 2,000–3,000 W (depending on model) • Control: TRUMPF CNC control with control panel • Enclosed work area with viewing windows • Automatic changing table • Integrated extraction / connection to filter system • Side control cabinet and power unit • Cooling unit (Riedel) set up separately • Material support with spiked / slat table Electrical connected loads (according to the type plate of the cooling unit) • 400 V • 3 Ph • 50 Hz Dimensions laser system (approx.) • Length: 6,500 mm  ...

Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used

Auction-ID: A1-44897-96

Cut-off cuts up to 35 mm, cutting capacity 50 A at 100 %, cutting capacity 120 A at 60 %, insulation class IP 21 Auction-ID: A1-45239-2131

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-4020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syste ...

Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Syst ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...