trumpf 6000 used for sale

Trumpf monitor Delem mod. DA 65

Punching capacity: 165 kN working area: 2070 x 1280 mm plate thickness: 6,4 mm control: CC 220 workpiece weight: 150 kg punch diameter: 76,2 mm : 80 m/min : 55 m/min weight of the machine ca.: 8000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12" TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5" - OS Platform: Windows NT Find more here - / Contact us at -

Inv. Num. : 8332 Type: TrumaBend V50 Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 1275 mm Distance between frame walls: 1040 mm Machine height: 2375 mm Machine length: 1930 mm Machine width: 2030 mm Machine weight: 4750 kg

Inv. Num. : 8333 Type: TrumaBend V85 S Producer: Trumpf Generated: Parameters: Compressive force: 85 t Maximum bending length: 2050 mm Distance between frame walls: 1750 mm Machine height: 2375 mm Machine length: 3190 mm Machine width: 2100 mm Machine weight: 8750 kg

Max. workpiece length ... 3000mm Max. workpiece width ... 1500mm Max. sheet thickness... 12mm Laser power... 2000W Total power requirement ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

Punching capacity: 220 kN plate thickness: 8 mm working area: 2535x1280 mm sheet thickness for stainless steel: 4-6 mm Accessories: -Setup cassettes -Table with ball rollers Youtube video link: https://www.youtube.com/watch?v=1RlPrkZPN0Y&ab_channel=BaestleinGmbH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.

Working area X/Y/Z: 3000mm/1500mm/115mm, laser power: 3200W (3,2kW), laser type: Trumpf Trumatic TC L 3020, max. material thickness steel: 20mm, cutting heads: 2x. Machine dimensions X/Y/Z: approx. 4600mm/9300mm/2000mm, weight: approx. 10500kg, laser hours: 56738h, beam hours: 26243h. Including cooling circuit filter unit Riedel and pallet changer. The door of the machine has an error in the acknowledgement. This can be easily solved by pressing the acknowledgement button and the cancel button. Documentation available. On-site inspection is possible.

Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible.

pressure: 120 t chamfer lenght: . mm distance between columns: 2550 mm stroke: 200 mm total power requirement: 13,2 kVA Number of working hours: 2500 h total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

table-size: 500 x 380 mm Overall size: 1400 x 1500 x 1800 mm weight of the machine ca.: 500 kg round table: 3-jaw chuck: diameter: 125 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3050 mm, 6 mm

3000 x 6mm Elgo P50 Rear sheet supports

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Machine in a well-maintained condition () with only approx. 31.800 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=PBV-MDtZnlE Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display Tool & program library USB keyboard and mouse interface  ...

Inv. Num. : 5955 Type: Trumatic 500 R Producer: Trumpf Created: 2003 Parameters: Control system: TRUMAGRAPH CC 220 S Switch-on hours: 29433 h Compressive force: 22 t Machine height: 2200 mm Machine length: 6900 mm Machine width: 5800 mm Machine weight: 11000 kg 2020: Replacement of hydraulic hoses

pressure: 85.0 t chamfer lenght: 2050 mm distance between columns: 1750 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec back stop - adjustable: max. 600 mm table width: 120 mm work height max.: 1050 mm Number of working hours: 28.500 h oil volume: 200 l operating pressure: 340 bar total power requirement: 14.0 kVA weight of the machine ca.: 9050 kg range L-W-H: 2680 x 2100 x 2885 mm with increased installation height / piston stroke very well maintained condition () with only approx. 28.500 operating hours - in checked condition - machine video - https://www.youtube.com/watch?v=ZuwyPKJSYLw Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control swiveling control panel at the front left - CNC controlled axes: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motoriz ...

pressure: 170 t chamfer lenght: 4080 mm distance between columns: 3680 mm column arm: 410 mm dayligth: 385 mm stroke: 215 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 200 mm table height: 1050 mm Number of working hours: 25.430 h oil volume: 350 l total power requirement: 29 KVA weight of the machine ca.: 16.450 kg. range L-W-H: 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tool and product library Graphic 2D programming Automatic bend sequence calculation and collision detection Emergency ...

Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible.

DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004

Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel

Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -

Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets

DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004

Inv. Num. : 8707 Type: TrumaBend V170 Producer: Trumpf Created: 2003 Parameters: Compressive force: 170 t Maximum bending length: 4080 mm Distance between frame walls: 3680 mm Stroke: 365 mm Machine weight: 18000 kg

Trumpf Haas HL 4006D Solid-State YAG Laser The Trumpf Haas HL 4006D is a 4000W Nd:YAG solid-state laser designed for industrial applications such as welding highly reflective materials, especially for use with robots and a range of up to 100 meters via flexible light guides. Applications Welding: The main application is welding metal parts, especially highly reflective materials such as aluminum and copper, where other lasers are difficult to use. Automated manufacturing: The laser is designed to be integrated into automated production lines with industrial robots. Precision machining: The high performance and precise beam quality enable precise work in industrial machining. Specifications Manufacturer: Trumpf Haas Type: HL 4006D Nominal laser power: 4000 W Beam quality: 25 mm.mrad Wavelength of laser light: 1064 nm Nominal voltage: 400 V Rated power:132 kW N ...

Offer 25376 Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 13 mm - Hydr. Cutting angle adjustment - Number of hold-downs 13 pcs - Front angle stop - 4 pieces of front support arms -Mot. Positioning-controlled backgauge 10 - 1000 mm - Cut line illumination - Rear space protection with side grilles + light barrier - E - Footswitch - Drive 400 V / 20 kW - Space requirement approx. W 4350 x H 2100 x D 2200 mm - Weight approx. 8.5 t

Laser cutting machine Trumpf Trulaser 3030

Inv. Num. : 8767 Type: Trumatic L3030 Producer: Trumpf Created: 2007, GO 2023 Parameters: Hours: 6099 h Switch-on hours: 12949 h Laser power: 3200 W Work table length: 3000 mm Work table width: 1500 mm

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 215 mm dayligth: 385 mm ajustment speed: 200 mm/sec working feed: 1-10 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10 mm Number of working hours: 53.820 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 16.0 KVA weight of the machine ca.: 11250 kg range L-W-H: 3640 x 2210 x 2375 mm - in checked condition - machine video - https://www.youtube.com/watch?v=23IbxRaZ2KA Equipment: - CNC electro-hydraulic press brake - including DELEM CNC control model DA 65 swiveling control panel, front left 2D graphic programming & product display tool & program library including new TFT-LCD industrial monitor - CNC controlled axes: Y1 + Y2 / X / R - CNC electro-motor / controlled back st ...

Inv. Num. : 8771 Type: TruLaser 5030 Fiber Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 32072 h Switch-on hours: 45208 h Laser power: 3 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Maximum sheet metal cutting thickness (copper/brass): 6 mm Feed length Z-axis: 150 mm Equipment: Liftmaster Compact

Inv. Num. : 8772 Type: TruLaser 3030 L20 Producer: Trumpf Created: 2012, GO 2024 Parameters: Hours: 35157 h Switch-on hours: 55771 h Laser power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 20 mm Maximum sheet thickness when cutting (aluminium): 8 mm Feed length Z-axis: 150 mm

Introducing the TRUMPF TruFiber 1000, a high-quality single-mode fiber laser designed for precise welding, cutting, and metal processing applications. This 1,000 W laser system features an integrated cooling system, advanced safety control panel, and active power control for stable operation. Equipped with a TRUMPF PFO 33-2 TF HAL high-speed scanning head, it enables beam movement without physical motion, significantly reducing cycle times. The system includes CPX and intelligent optics, VisionLine Basic joint detection, and CalibrationLine Power auto beam power calibration. Also included is the Precitec LWM 4.0 weld monitoring system, complete with an IR sensor unit and modular laser safety cabin. Manufactured in July 2022, this equipment ensures high efficiency and reliability, ready for immediate deployment.

pressure: 85 t chamfer lenght: 2750 mm distance between columns: 2260 mm total power requirement: 17 kW weight of the machine ca.: 8.300 kg dimensions of the machine ca.: 3800 x 2300 x 2400 mm Accessories/equipment: - TRUMPF TASC 6000 - 2 support arms in front of the machine - Lazersafe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 220 kN sheet thickness - max.: 6,4 mm travel -x axis: 2500 mm travel -y axis: 1270 mm : 90 m/min : 60 m/min : 108 m/min : 360 °/sec punch diameter: 76,2 mm workpiece weight: 150 kg : 0,01 mm bzw. 0,01° : 15 Stück tool changing time: 1,5 - 6,5 sec weight of the machine ca.: 11.050 kg dimensions: 6400 x 5800 x 2100 mm Working hours: 30.430 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 18 kN

TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1300 mm, 22 kN

TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Manufacturer: Trumpf Model: TruLaser 5030 Year of Manufacture: 2010 Operating hours: 57,876 h Known defects: Collision protection; cutting unit cannot be pushed back into the correct position; repair or replacement is necessary. It includes also a Liftmaster : Year of manufacture: 2015 (retrofitted) Operating hours: almost none Known defects: none Find more here - / Contact us at -

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible.

CNC Press Brake Manufacturer: Trumpf Type: Truma Bend V170 Year of Make: 2000 CNC Control: Delem Press force: 170 to Working width: 4 m Crowning Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m without tools

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported