trumpf 600 used for sale

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 17 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Standard configuration Machine ⦁ Universal Robots UR10e ⦁ Demmeler welding table ⦁ Telescopic separating wall ⦁ Linear axis ⦁ Exhausting system ⦁ Safety enclosure ⦁ gas connectioni ⦁ compressed air connection Welding source ⦁ Fronius MAG/MIG high-performance welding source ⦁ Robotic welding torch ⦁ MIG/MAG robotic hose package ⦁ Fronius wire feed system ⦁ Holders for wire spools ⦁ Preparation for connection of a wire drum Control ⦁ Robot control with easy programming ⦁ Central control unit Operation ⦁ Control unit with foot switch ⦁ Control unit for easy programming Data transfer ⦁ USB interface Safety ⦁ Safety device ⦁ CE marking

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration ⦁ Solid-state laser TruDisk 3001 with air-cooled chiller and pilot laser (switch) ⦁ LLK with 100 µm ⦁ Focusline ⦁ Optics recognition and magnetic coupling ⦁ Sinumerik 840D control system: Open control on PC basis ⦁ Fixed suspending control panel ⦁ Teach panel with teach software Additional equipment ⦁ Laser cutting: including 2 cutting gases (02, N2), APC distance control, programmable cutting gas selection, adjustment device, analogue value cutting, pressure adjustment, valves ⦁ Dynamic cutting optics f = 150 mm incl. sensor ⦁ FastLine Cell ⦁ LLK 30 m ⦁ Special suction unit

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ Single cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer in longitudinal direction ⦁ Conveyor belt for small parts / slug ⦁ 19 Touch screen ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine TRUMPF Laser ⦁ CO2 laser TruFlow 5000 with optimized standby ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC ⦁ Laser power control ⦁ Logbook function laser Cutting head ⦁ LensLine with status check ⦁ Lens cutting head with 250mm focal length ⦁ Universal quickchange device for cutting head (UTI) ⦁ ControlLine: automatic heig ...

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness for rake 25 mm max. sheet thickness for belt prongs 15 mm max. sheet weight 900 kg LiftMaster Compact 1530 (AL 34) basic unit ⦁ Type 1530: sheet sizes/thicknesses 3048 mm x 1524 mm ⦁ Loading station; stack height of 90 mm / 3 t ⦁ Movable unloading rake (prong spacing 67 mm, replaceable prongs) ⦁ Finished part pallet and extended pallet removal station at the machine ⦁ Store interface Loading ⦁ Peeling unit ⦁ Double sheet detection ⦁ Synchronous loader including separation of thin sheet (0.8 - 2.0 mm) LiftMaster Compact options ⦁ Cleaning brush for slats ⦁ Safety devices for connection to storage system incl. 2nd light barrier circuit ⦁ Storag ...

Standard configuration Machine ⦁ Closed machine frame with integrated laser unit ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery system ⦁ One cutting head strategy ⦁ Chiller ⦁ Automatic pallet changer, lengthwise installation ⦁ Longitudinal conveyor ⦁ Ergonomic control panel with Touchscreen ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ PlasmaLine Trumpf Laser ⦁ CO2-Laser TruFlow 3200 with optimized standby Modus ⦁ Maintenance-free radial turbine blower ⦁ Radio-frequency excitation ⦁ Laser control TASC 3 ⦁ Laser power control ⦁ Logbook function Laser Laser cutting head ⦁ Laser cutting head with 250 mm lens ⦁ Universal quick-change device (UTI) incl. bus connection ⦁ LensLine ⦁ ControlLine: Height regulation and sh ...

Standard configuration · Stable machine frame as a welded, all-steel construction · Ram (press beam), highly resistant to torsional forces · Electrohydraulic downstroke drive via proportional valves · Modern block hydraulics · CNC backgauge with rack-and-pinion drive, for X and R axis, · Safe adjustment of stop fingers from the front · Upper tool clamping system New standard clamping II, manual · Lower tool holder for EV dies, hydraulic clamping · Programmable shifting (2 positions) · Control system: TASC 6000 · Safety equipment: Integrated side doors and automatic back roll-top · Switch cabinet air-conditioning · Network compatible · Manual crowning, centrically adjustable Additional equipment · 5 axis backgauge system · Hydraulic upper tool clamping · CNC crowning · BendGuard safety device · Additional foot switch · 2 x front support brackets · Preparation ACB  ...

Standard configuration Machine ⦁ Working range: 4000 × 2000 mm ⦁ Box frame ⦁ Longitudinal conveyor belt ⦁ Motion unit for high-precision processing ⦁ Gantry drive in combination with linear direct drives ⦁ Process cooler for machine and laser (water/air) ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Universal cutting unit with adaptive lens system ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Automatic nozzle centering Control ⦁ Quick post-production ⦁ SINUMERIK control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color  ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration Machine ⦁ Stable machine frame for standing and sitting operation ⦁ Ram: stress relief annealed, optimized for few deformation ⦁ Electro-mechanic direct drive (Torque drive) ⦁ Inductive linear measurement system with temperature compensation ⦁ Switch cabinet air-condition ⦁ Ergonomic machine design Backgauge system ⦁ Highly dynamic backgauge system 3-axes X1, R1, Z1 Tool clamping ⦁ Upper tool system manual, non-hardened and self-centering for vertical tool change ⦁ Manual hardened lower tool clamping Control ⦁ Integrated machine control: TRUMPF TASC 6000, numerical shop floor programming ⦁ Windows XPe, Pentium M operating system, 1,1 GHz ⦁ 1 GB RAM memory ⦁ 15 touch screen ⦁ Network compatible Safety ⦁ Pivotable safety side-doors ⦁ Rear and side protective guard ⦁ 2-button foot switch for standing and sitting operation Addit ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology (IE3 drive motor) ⦁ Electronic pressure balance ⦁ Measuring system: With centered glass scales and temperature compensation. ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges. Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control options ⦁ TRUMPF TASC 6000 ⦁ Network connection mach ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Standard configuration ⦁ Stable all-steel welded machine frame ⦁ Press beam with high bending stiffness ⦁ Electro-hydraulic upper beam drive via proportional valves ⦁ Modern hydraulic block system ⦁ CNC backgauge with rack-and-pinion drive for X and R axes; safe front-side positioning of backgauge fingers ⦁ New Standard Clamping II manual upper tool clamping system ⦁ Lower tool holder for EV dies with hydraulic clamping and programmable positioning ⦁ Pneumatic lower tool shift with two positions ⦁ Electrical cabinet air conditioning ⦁ Network connectivity ⦁ Manually adjustable central crowning system ⦁ TASC 6000 CNC control Additional equipment ⦁ 6-axis backgauge system ⦁ Hydraulic upper tool clamping ⦁ CNC crowning ⦁ Safety device BendGuard for 220 mm/s ⦁ Preparation ACB ⦁ Working area lighting ⦁ 2 banding aids ⦁ Parking position 900 mm

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track  ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 15 tool stations, 2 clamps ⦁ Drives with maintenance free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball tables ⦁ Parts chute 180 x 150 mm ⦁ Swarf bucket Punching head ⦁ Hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Controller based on Bosch PNC-P ⦁ Control panel with 15 TFT color touch screen ⦁ Easy to use ⦁ Online-help ⦁ Diagnostic functions Data transmission ⦁ Integrated USB interface ⦁ RJ 45 network connection Safety ⦁ CE marking ⦁ Light barriers ⦁ Rapid hydraulic shutdown Additional equipment Punc ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 19 tool stations, 2 clamps ⦁ Maintenance free drives ⦁ Repositioning device with programmable presser foot ⦁ Parts chute 500 x 500 mm ⦁ Good parts container ⦁ Chip conveyor ⦁ Automatic shutdown mechanism Cutting head ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Open control system based on BOSCH PNC-B ⦁ Control panel with TFT colour screen 12.0” ⦁ Program management ⦁ Production plan ⦁ On-line help ⦁ Integrated technology data ⦁ Diagnostic functions Programming ⦁ Machine-oriented shopfloor programming Data transmission � ...

Standard configuration Machine ⦁ C-frame ⦁ Coordinate guide ⦁ Linear magazine with 21 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball-fitted tables ⦁ Foot switch for closing clamps ⦁ Part chute ⦁ Part removal flap 500 x 500 mm ⦁ Finished part container ⦁ Chip container ⦁ Ability for retrofitting ToolMaster Linear ⦁ 1st index pin position right hand inner side Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable position of the presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Forming ⦁ Stroke rate punch ⦁ Level monitoring of tool lubrication ⦁ On-Demand-Dri ...

Machine including Liftmaster.

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Linear magazine inclusive four clamps ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ Programmable presser foot ⦁ Stripper position sensor ⦁ Tool length compensation ⦁ On-Demand-Drive ⦁ Punch stroke rate and thread stroke rate counters ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Monitoring of fill level of tapping and tool lubrication Control ⦁ Open controller based on Sinumerik 840D Solutionline ⦁ Control panel with 17 TFT touch screen Data transmission ⦁ USB interface and network connection RJ45 Safety ⦁ CE marking ⦁ Multi-beam light barriers ⦁ Rapid hydraulic shutdown ⦁ Sheet collision detection Addition ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming � ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Automatic pallet changer lengthwise installation ⦁ Torque drive in combination with direct linear drives ⦁ Enclosed beam delivery via fiber optic cable ⦁ Chiller for machine cooling (water-air) ⦁ Integrated eletrical cabinets with inside light ⦁ Power supply TruDisk via the machine ⦁ Longitudinal conveyor ⦁ Working area lighting ⦁ Positioning laser diode ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning TRUMPF Laser ⦁ Solid state laser TruDisk 3001 with 1 LLK output ⦁ Fiber optic cable according standard layout (laser next to the machine) ⦁ Laser chiller unit (water-air) ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting head with complete adaptive lense system ⦁ One cutting head stra ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Integrated cabinet ⦁ Motion unit for high precision processing ⦁ Torque drive in combination with direct linear drives ⦁ Chiller ⦁ Automatic pallet changer lengthwise installation ⦁ Enclosed beam delivery via laser light cable ⦁ Integrated electrical cabinets with inside light ⦁ Ergonomic control panel with Touchscreen ⦁ Work area lighting ⦁ Spray device ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ Automatic nozzle cleaning TRUMPF lasers ⦁ External solid state laser TruDisk 3001 with 1 fiber optic cable laser output ⦁ Stimulation via pump diodes ⦁ Laser power control Cutting head ⦁ Universal cutting unit ⦁ One cutting head strategy ⦁ Protection glass to avoid lens contamination ⦁ Online protection glass monitoring ⦁ ControlLine Control ⦁ Easy shop floor programming ⦁ Fast post pro ...

Standard Configuration Machine ⦁ Working area: 3000 x 1500 mm ⦁ Box frame ⦁ Process cooler for machine and laser (water/air) ⦁ Longitudinal conveyor belt ⦁ Work area illumination ⦁ Pilot laser ⦁ Spraying equipment ⦁ Automatic nozzle cleaning ⦁ Gantry drive in combination with linear direct drives ⦁ Integrated electrical cabinets ⦁ Integrated cabinet ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Machine status light ⦁ Machine environment temperature +5°C to 35°C TRUMPF laser ⦁ Excitation using pump diodes ⦁ Laser power control Cutting unit ⦁ Single cutting head strategy ⦁ Protective glass ⦁ Online condition checking of protective glass ⦁ Universal cutting unit with fully adaptive lens system Control ⦁ Quick post-production ⦁ SINUMERIK 840D SL control ⦁ Ergonomic control panel with 21.5 wide-screen multi-touch color display ⦁ In ...

Automation Basic Module — 2 pcs ⦁ Storage tower for max. 15 storage locations ⦁ Loading height: 90 mm ⦁ Maximum payload per pallet: 3,000 kg ⦁ System height: 3,890 mm (without pallets) ⦁ Storage safety devices ⦁ Max. two basic modules Extension Module 1.0 — 2 pcs ⦁ For max. 4 storage locations ⦁ Loading height: 90 mm without pallets ⦁ Module height: 1,080 mm Storage Retrieval Unit — 1 pc ⦁ Operator panel ⦁ Storage safety device ⦁ System height: 3,890 mm ⦁ Extension for Storage Retrieval Unit for Extension Module 1.0 / 1.6 — 1 pc ⦁ Lifting chain ⦁ Module height: 1,080 mm Storage Location, 90 mm, incl. pallet — 36 pcs

Standard configuration Machine · Closed machine frame with integrated laser unit · Torque drive in combination with direct linear drives · Enclosed beam delivery via fiber optic cable · Chiller for machine cooling (water-air) · Integrated eletrical cabinets with inside light · Automatic pallet changer lengthwise installation · Wide longitudinal conveyor · Power supply TruDisk via the machine · Working area lighting · Positioning laser diode · Spray device · PierceLine · FocusLine · NitroLine · PlasmaLine · Automatic nozzle cleaning TRUMPF Laser · Solid state laser TruDisk 3001 with 1 fiber optic cable laser output · Fiber optic cable according standard layout · Laser chiller unit (water-air) · Stimulation via pump diodes · Laser power control · Logbook function Laser Cutting head · Universal Cutting head with complete adaptive lense system · Protection glass t ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system: with centered glass scales and temperature compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Control panel: with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Hydraulic oil filled in the machine (lifetime lubrication) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydrauli ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology ⦁ Optical set-up and positioning assistant ⦁ Generous edge clearance ⦁ Flat front covers ⦁ Block hydraulics ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and deflection compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ TCB - Thickness Controlled Bending Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Hydraulic upper tool clamping ⦁ Hydraulic lower tool clamping, hardened ⦁ Lower tool shifting 2 positions, pneumatic Crowning ⦁ CNC crowning Control ⦁  ...

Standard configuration Machine ⦁ C frame ⦁ Press beam ⦁ Highly dynamic electromechanical direct drive ⦁ Distance measurement system (Y-axis) with dynamic deflection compensation ⦁ Electrical cabinet air conditioning up to an ambient temperature of 40 °C Backgauge system ⦁ 3-axis backgauge with carbon fiber gauge finger (X, R and Z axis) Clamping system ⦁ Manual TRUMPF upper tool clamp ⦁ Manual TRUMPF lower tool clamp Control ⦁ TASC6000 machine controller ⦁ Integrated TRUMPF technology data ⦁ Data transfer ⦁ Network capability ⦁ USB interface Operation ⦁ Foot switch Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Backgauge system ⦁ 6-axis backgauge system Ergonomic package ⦁ Comfort support table (front) ⦁ Comfort foot rest ⦁ Front work area illumination (LED) ⦁ Swiveling control panel ⦁ Sitting and standing aid ⦁  ...

Standard configuration Machine ⦁ Closed machine frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Foot switch for closing clamps ⦁ Beam guard ⦁ Part chute right side ⦁ Part removal flap left side ⦁ Sensor for part removal flap ⦁ Work area illumination ⦁ FocusLine ⦁ SortMaster Compact retrofit capability TRUMPF Laser ⦁ Solid state laser TruDisk 3001 with 1 laser output ⦁ Fiber optic cable according standard layout (10m) ⦁ Laser power control ⦁ Logbook function laser ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Separate energy supply of TruDisk Compact cutting unit ⦁ Solid-state compact cutting unit ⦁ Protective glas ⦁ Collision protection ⦁ ControlLine Punching head � ...

Standard configuration Machine ⦁ Box frame ⦁ Press beam ⦁ Spherical bearing of the press beam with press beam tilting ⦁ Electro-hydraulic upper drive ⦁ Block hydraulics ⦁ Distance measurement system (Y axis) with dynamic deflection compensation ⦁ Hydraulic oil filling (life-long filling) ⦁ Oil cooler Crowning ⦁ Self-regulating, combined crowning Backgauge ⦁ Gauge fingers (2 pieces) Tool clamping ⦁ Manual upper and lower tool clamp Control ⦁ T3500T Multi-Touch machine control ⦁ Integrated TRUMPF technology data Data transmission ⦁ USB interface ⦁ RJ45 network interface Operation ⦁ Operating unit with foot switches Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Crowning ⦁ CNC crowning Backgauge system ⦁ 5-axis backgauge system : R1, Z1, Z2, X1, X2 (Delta X) Tool clamping ⦁ Hydraulic upper tool clamping Contr ...

This 3-axis TRUMPF TRUMATIC L 2530 Plus was manufactured in 2005 and will come with a Storemaster. It features a powerful 2700 W laser and includes advanced equipment such as a laser cutting head with 3.75 and 7.5 lenses, automatic sheet edge detection, and programmable cutting gas selection. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 2530 Plus CO2 laser cutting machine we have for sale. Contact us for further details.

Lg.Nr. 25514 Defective Hydr. CNC - Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - With 6-axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported - Machine does not drive reverence because 2 axles right in the back gauge are without function, contr ...

A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

Trumpf TruBend Center 5030Year of manuf. : 2021 ____________Description:TruBend Center 5030:- Robust machine frame: - Angular direct drive:- Crowning system:- Machine control with touchscreen operation:- TecZone Fold programming – floating licence:- 2-axis part manipulator with suction modules:- 5-axis backgauge:- Optical angle assistant:- ToolMaster:- Hold-down tools:- OBW90 and UBW90 bending toolsTechnical specificationsMinimum bending depth (standard tool):145 mmMinimum bending depth (with additional hold-down tool):40 mmMaximum bending length:3,123 mmMinimum bending length:80 mmHold-down force:101 tMaximum box height:220 mmMinimum material thickness:0.4 mmMaximum steel material thickness:3 mmMaximum stainless steel material thickness:2.2 mmMaximum aluminium material thickness:4 mmRapid traverse Y-axis (press beam):250 mm/s5-axis backgauge:1,700 mm/sToolMaster Bend:2,400 mm/sD ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower tool shifting ⦁ Lower Tool Adjustment Safety ⦁ Standard Safety equipment: Emergency Stop button, manual roller shutte ...

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track  ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Ball-fitted tables ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine for tool stations and clamps ⦁ 21 tool stations, 4 clamps ⦁ Part chute for small parts 80 x 50 mm ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear ⦁ 1st index pin position inner side (right or left) Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable pressure foot (active /passive / repositioning) ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Stroke rate punch ⦁ Monitoring of fill level of tapping and tool lubrication ⦁ On-Demand-Drive ⦁ Stripper position measurement system with function sheet thick ...

Trumpf V230 for sale. 4axis plus disposable bending aid

Trumpf bending machine 7036 for sale

3 x Trumpf bending machines (hydraulic press brakes): • TrumaBend V50 | Year of manufacture 1997 • TrumaBend V85 | Year of manufacture 1997 • TrumaBend V85 S | Year of manufacture 2001 Condition & Maintenance: As can be seen in the attached pictures, all machines were fully serviced as part of the annual UVV inspection. The last inspection took place for all plants in the summer of 2026. The machines are currently still in ongoing production operation and are fully operational.

Hydraulic control block for Trumpf V130

Hydraulic Control Block For Trumpf V50 For Sale

Transnorm roller curve 2 x 90Â ° 670-600 IR816 + straight unit 900-670-600 RA1219 The Transnorm wheel curves with straight gear are from 2006 and in a good (used) condition. It has a central engine of the SEW brand. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 2712 Roller curve 2x90Â ° + straight frame Built: 2006 Condition: good (used) Engine: fully functional Angle: 90Â ° Inner radius (IR): 816 mm Nominal/outer width (NB): 670 mm Usable width (NUB): 600 mm Conveyor length straight section: 900 mm Motor Type: SEW three-phase motor Engine power: kW 0.55 S1 Hz 50 A 3.05 / 1.75 Funding speed: 0.7 m/sec Drive: Center drive Weight: 360 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports 70,00â ?¬ per piece Price: â ?¬ 3240,00 plus  ...

Height=0.765 m, Overall length= 0.6 m, Overall width= 0.6 m, Net weight= 58 kg,

FEEDER BELT - CONVEYOR BELT GFB 600 FOR INJECTOR GÜNTHER PI 104/236 - overhauled, in gut condition Belt width 600 mm Belt length 810 mm Total length 1360 mm Width 1210 mm Height adjustable from 1010 to 1260 mm Request a quote on iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36