truck man 26 used for sale

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, butterfly valve, gate valve, manual gate valve, gate valve/chain gate valve -Shut-off valve: for ventilation duct extraction system -Pipe diameter: 100 mm, see photos -Number: 2x gate valves available -Price: per piece -Dimensions total: 270/160/H180 mm -Weight: 1.2 kg

Granule dryer, granulate drying plant, granulate conveyor, vacuum conveyor -Manufacturer: Digicolor, granulate conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: Material VA -Individual components/dimensions: see photos -Dimensions total: 260/250/H830 mm -Weight: 13.6 kg

Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Lenord Bauer, incremental encoder -Type: GEL 260-V-01250A201 -Shaft: Ø 8 x 25 mm -Bolt circle: Ø70 mm M5 -Number: 1x encoder available -Dimensions: 107/90/H90 mm -Weight: 0.6 kg

Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: boltless rack, heavy-duty rack with storage shelves 2 bays / rack length 5600 mm -20 levels: compartment height adjustable -Stands: 3 pieces 3780/(1120/120 mm -Cross braces: 40 pieces 2765/60/240 mm -Rungs: 40 pieces 1115/50/100 mm -Shelves: 18 pieces of chipboard 2680/1090/40 mm -Price: complete -Transport dimensions: 3780/1500/H1400 mm -Total weight: 2010 kg

Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange for: driving heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 260 mm -Adapter: short cone size 6 (Ø103-105 mm) -Bolt circle: Ø 133 mm -Dimensions: Ø 260 x 140 mm -Weight: 11.2 kg

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm -Weight: 7 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: VBM, Manometer 0-10 bar, unused, original packaging -Type: 1/BM 20 M 20x1.5 260 Ø -Item No.: 13301-B44-01 -Number: 9x pressure gauges available -Price: per piece -Cardboard dimensions: 310/310/H70 mm -Weight: 4.6 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Pneumatic clutch-brake combination -pneumatically operated -with brake exit side -Shafts: Ø 35 mm -Number: several couplings available Price: per piece -Dimensions: 460/220/H325 mm -Weight: 50 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump -Max pressure: 70 bar -Drive: 55 kW 1470 rpm -Liter output: 268 l/min -first pump type: KP42/82 F10JV00 -Second pump type: KP42/100 C1ZXZVG -Hydraulic tank: -Dimensions: 2200/200/H1400 mm -Weight: approx. 3500 kg

Bore: 25 mm number: 6 Dimensions (LxWxH): 155 x 140 x 130 mm weight - pallet system: 14 kg Two new Toolholder for BMT 65 turret Price for each toolholder 6x Ø 25 mm bore extern and internal coolant Haas ST- line / BMT 65 for Dooasan, Haas, Hwacheon The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Rotating platform: Ø 1500 mm Wrapping with stretch film Working height: max. 2500 mm Manual adjustment and operation Electronic scale: max. 1500 kg

Key data: 270 mm

16 A plug Saw blade housing right. side replaced by steel plate. Length 0.8 m Width 0.65 m Height 1.40 m Weight 200 kg

CONTROLS   electronic controls TECHNICAL SPECIFICATION   max. diameter of saw blade: 260 mm   cutting capacity round: 260 mm   cutting capacity square: 260 mm   mitre cutting: yes   cutting range     round: 260 mm   .. oblong: 400 mm TECHNICAL SPECIFICATION   max. cutting height: 260 mm   sawband length: 4310 mm   sawband width: 0.9 mm   cutting speed min.: 17 m/min   cutting speed max.: 90 m/min   power of band drive: 2.2 kW ELECTRICAL SPECIFICATIONS   total power consumption: 3.2 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2100 mm   total height: 2000 mm   total weight approx.: 1220 kg Machine overhauled, cleaned, and all oils replaced! The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container ...

TECHNICAL SPECIFICATION   max. cutting height: 150 mm   sawband length: 3660 mm

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Robot type : W643 – 269 Control N° : CNC 6 – 2617 Year : 2004 Removal X – Axis : 1200 mm SER Standard Vertical Y – Axis : 2600 mm SER Standard Horizontal Z – Axis : 4500 mm SER Standard Placing C – Axis : 60NM-P 90 Rotation A – Axis : No Rotation B – Axis : 15,0NM-MOT 0-270

turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...

Robot ABB Robotics IRB 2600 20/1.65 IRC5 M2004 , mechanics only Number of axes: 6 Max. load capacity: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: robot mechanics In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

ABB Robotics IRB 2600 20/1.65 IRC5 M2004 Robot , Multimove 12 Axis, 2 Robots Number of axes: 12 Max. load capacity: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: 2x robot mechanics, Multimove 12-axis control cabinet, teach panel, connecting cables In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

x-travel: 2600 mm y-travel: 1100 mm z-travel: 900 mm control: Heidenhain 530 total power requirement: kW weight of the machine ca.: 25050 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 376 mm turning length: 760 mm control: Fanuc x-axis: 260 mm z-axis: 830 mm total power requirement: kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MTA Aries AS 267 / N Kaltwassersatz / Chiller Two identical ones available Year of Build 2008, 131 KW all documents and service booklet are available, last service on 05.2025. VAT can be declared

ABB Robotics IRB 2600 12/1.85 IRC5 M2004 robot, complete Control: IRC5 M2004 Number of axes: 6 Max. load capacity: 12 kg Max. working range: 1850 mm Year of manufacture: 12/2013 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: SIN 840 D Siemens B - axis: +/- 110 x 0,001 ° C-axis: 360 x 0,001 ° feed X/Y/Z-axis: 1 - 20.000 mm/min rapid traverse X/Y/Z: 40,00 m/min spindle turning speed - stepless: 20 - 8.000 U/min tool taper: SK40 power capacity at 100 % load: 13,50 kW power capacity at 25 % load: 23,50 kW max. torque at 10% load: 85,00 Nm max. torque at 25% load: 150,00 Nm table surface area: 2.920 x 740 mm number of T-slots: 7 T-slot - distance: 100 mm T-slots: 1x 18H7 / 6x 18H12 integrated rotary-table: 750 mm table load of rotary table max.: 500 kg tool magazin:: 60 tool diameter: 80,00 mm wotkpiece diameter with 2 vacant positions: 130 mm tool length - max.: 300 mm weight of tools max.: 6,00 kg total power requirement: 57 kW weight of the machine ca.: 15,5 t dimensions of the machine ca.: 10,50 x 6,60 x H2,70 m 5-axis simultaneous machining cent ...

The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation.,  ...

Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details.

Transnorm belt conveyor GF 26000-1000-900 RA2510 Technical data: Conveyor length (NL): 26000 mm frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 26000 Nominal / outside width in mm: 1000 Belt width in mm: 900 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / s: 0,2 scope of d ...

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Key data: 2600 kN

Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...

Key data: 2600 kN

Engel Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - Ser ...

General SKU412T1301 LocationBarneveld MakeMedimex TypeMed. 260 No.170730 Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume1 Ltr. Motor0.12 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity1 Ltr. Vessel sizes100x140 mm Top connections5/8: (2x), 3/4: (2x), 1/4:: (2x) Half coil jacketedcheck Max. temperature300 °C With propellor stirrercheck Motor0,12 kW, 220-240/380-420 volt, 1390 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General Year of construction1996 Mounted on legscheck Floorspace0,45x0,45 m Total height1,95 m Weight180 kg ATEX designedcheckStainless Steel ReactorsPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & ol ...

General SKU008Y104 LocationBarneveld MakeRosenmund AG Liestal TypeRND 0,6-262-81 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor5.5 KW Surface0.6 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,6 m² Capacity485 l. Vessel sizesø 876 x 620 mm With jacket14 l. Max. temperature200 °C With stirrercheck With variable speed drivecheck Hydraulic drivecheck Motor5,5 kW 380V 1445 rpm (Ex) With hydraulic unitcheck MaterialStainless steel 1.4435 (316L) With jacketcheck General Mach.No.2250 Year of construction1981 Mounted on framecheck With switchgear(as is) Floorspace1,9x1,2 m Total height2,0 mNutsche filtersOils & fatPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalAgrochemicalsBiotechnologyCatalysts & fillersFeed additivesDiscountDet ...

General SKU152P694 MakeBucher Type1410 Mounted on legscheck Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume260 Ltr. Motor3.6 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity260 Ltr. Vessel sizesdia. 700x800 mm Dished bottomcheck Dished top sidecheck Manhole300x150 mm Top connectionscheck Outletdia. 50 mm With jacketcheck Half coil jacketedcheck With turbo stirrercheck Motor3,6 kW, 220/380 Volt, Ex. With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld FloorspaceDia. 1,1 m Total height2,8 mStainless Steel ReactorsPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPI ...

General SKU120P508 MakeHoefnagel+Meijn BV No.87358-02 Year of construction1987 LocationBarneveld Pressure Working pressure12 Bar Main Features MaterialStainless steel Volume265 Ltr. Motor5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity265 Ltr Vessel sizesdia. 650x900mm Dished bottomcheck With jacketcheck Max. temperature200°C Motor5 KW, 220 Volt (Ex), With variable sp. dr. Speed mixing shaft188 to 941 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General ATEX designedcheck Extra Specifications- Stirrer make Ekato type HWLO 40LStainless Steel ReactorsPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalAgrochemicalsRubberPlastic & polymersCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & in ...

This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 18000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details.

An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Key data: 2600 mm, 1200 mm, 1000 mm

Inv. Num. : 9211 Type: DMF 260 Producer: DMG Created: 2010 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 63822 h Hours: 29578 h Maximum vertical spindle speed: 8000 1/min X-axis travel: 2600 mm Y-axis travel: 1200 mm Travel Z axis: 1000 mm Number of axles: 5 pieces Machine weight: 25000 kg

- 1 x KLAEGER band saw HBA 265 built in 2001 - 1 x KLAEGER band saw HBA S265 built in 2008

Band width: 200mm; Band length: 2600mm; Table size: 935mm x 460mm; Additional table: 350mm x 300mm; Veneer sanding equipment: yes; Oscillation: yes; Grinding unit swivel: yes; Suction port: 120mm; Motor power: 2.25 kW; Machine length: 1700mm; Machine width: 800mm; Weight: 400kg;

engine lathe, year 2018, CNC Z32. Used machine in good condition. More info & price on IndustrialBuyer.

DMG MORI DMF 260 | 11Year of manuf. : 2022 Control : Siemens 840 DSL - Celos Speed : 20000 rpmMovement X/Y/Z : 2600/1100/900 mmTool holder : SK 40 ____________Description:In General:Year of manufacture:2022Control system:Siemens 840 Dsl - CelosTravel ranges X/Y/Z:2,600/1,100/900 mmSpindle speed:20,000 rpmTool holder:SK 40Spindle:Technology:Direct drive spindleSpeed:20,000 rpmMax. power:35 kWMax. torque:120 NmTool holder:SK 40NC swivel head:Technology:Swivel axis (B-axis)Travel range:+/- 100°Work table:Technology:Fixed table with integrated NC rotary tableTotal clamping area:3,200 x 1,100 mmTotal table load capacity:4,000 kg/mClamping area of NC rotary table:1,050 mmMax. table load capacity of NC rotary table:1,200 kg/mC-axis:360°Tool magazin:Technology:Chain magazineNumber of stations:120Tool changer:Double gripper with ATC shuttleMax. tool diameter:130 mmMax. tool length:300 mmE ...

Belotti FLU 2617Year of manuf. : 2022 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 € : 1145.34 € : 3100 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1550 mm : 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

CNC Machining Center Hedelius T7 – 2600 1 R incl. standby magazine Control: iTNC 640 Year of Make: 2017 Internal machine no. 68 Travels: X-axis F/H 2,600 / 2,030 mm Y-axis 750 mm Z-axis F/H 695 / 800 mm Swivel range: -98° to +98° Pendulum operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Mount: SK 40 Tool magazine: 33-fold Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head - Internal compressed air supply - Inclined bed coolant system 900l - Internal coolant supply (IKZ) 25 bar - Infrared Receiver M&H - 3D Infrared Probe M&H 25.50 - Exhaust air filter - Blow-off guns - Rinsing guns

Offer 26154 Technical data: - Cutting range at 90° around 260 mm - flat 410 x 200 mm - Mitre adjustable 90 to 30 ° - Schnittb. at 45° Re + Li round 220 mm - flat 230 x 300 mm - Material support height approx. 620 mm - Saw blade dimensions 3660 x 27 x 0.9 mm - Cutting speed 17 - 106 m/min - hydr.– lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Material vise - Saw blade cleaning brush - Total drive power 400 V / 1.9 kW - Space requirement approx. W 1300 x H 1800 x D 2000 mm - Weight approx. 900 kg

x-travel: 2600 mm y-travel: 1100 mm z-travel: 920 mm tool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kW weight of the machine ca.: 26,1 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sliding headstock CNC lathe, year 2014, CNC 840D. Used machine in good condition. More info & price on IndustrialBuyer.

General SKUR0875 MakeApaco AG (CH) LocationBarneveld TypeAW300-2600/20-98 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface16 m2 Tube capacity105 Ltr U-typecheck Tube length2500mm Max. temperature165 degr.C. Shell capacity140 Ltr Shell diameter323,9mm Shell length3200mm Wall thickness shell3,2mm Max. temperature5 / 165 degr.C. Shell connectionsDN200 (1x), DN80 (1), DN50 (2x) Cover connectionsDN 50 MaterialStainless steel 1.4435 (316L) With jacketcheck General No.503532/3 Year of construction1985 Floorspace0,6x0,6 M Total height3,4 M Weight420 KgShell and tube heat exchangersOils & fatConsumer waste ...