truck man 26 used for sale

Inv. Num. : 8814 Type: IRB 2600 Producer: ABB Created: 2014 Parameters: Operating hours: 5162 h Maximum arm reach: 1650 mm Maximum load capacity: 12 kg Machine weight: 150 kg

TECHNICAL SPECIFICATION   max. cutting height: 150 mm   sawband length: 3660 mm

Used Carrier 30 HXC 265 water cooled chiller on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with a display. Specifications: Brand: Carrier Type: 30 HXC 265 Product type: Water cooled chiller Capacity kW: 911,3 Capacity Tons: 259,1 Refrigerant: R134A Weight in kg: 4492 Sizes: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display

Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2690 Nominal / outside width in mm: 200, 120 Roll division in mm: 75 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einf ...

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1720x950x1260 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x3010x1250 mm Weight: 500 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example.

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Arburg ARB 267 1 818 310 011-2V1 SN 109302 (267) Bosch B 830 303 314 Prop. Verst Hersteller: Arburg / Bosch Teilenummer: SN 109302 / 1 818 310 011-2V1 Leiterplatte Number: Bosch B 830 303 314 Type: ARB 267 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062623

youtube.com/watch?v=QGamRp_xIlk

-Manufacturer: Seewer AG -Model: SFT 262,+ 23 -with 2 cutting rollers band is renewed -Mobile on castors

5-speed station wagon Holzmann K5-260VF, good condition, standard equipment, 1200 mm cutting length, 3 knives, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

AJAN SHP 260 plasma-gas cutting machine was built in 2015 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd Şti. The machine, distinguished by its high efficiency, is an excellent choice for thermal cutting of sheet metal. The machining process is performed by means of reliable torches, located on two separate gantries. This solution, combined with the large surface area of the work table, enables the machining of more than one sheet at a time with different cutting methods. The AJAN plasma-gas cutting machine is offered with equipment that includes, among others, a HYPERTHERM plasma source of the highest energy efficiency, exhaust extraction and a track. The total weight of the machine is 520 kg. Technical specifications of the AJAN SHP 260 plasma-gas cutting machine - CNC controller: AJAN - working table dimensions (L x W): 16000 x 3000 mm - plasma source: HYPERTHERM - plasm ...

This Pinacho SMART 260 was manufactured in 2008. A reliable horizontal turning machine, it offers consistent performance for various machining tasks. Ideal for workshops requiring precision in turning operations. Contact us for more information.

These KUKA welding robots are featuring a turn-tilt module with a maximum load capacity of 2600kg and a KUKA KL4000 track. If you are looking to get high-quality welding capabilities, consider this pack of weding robots we have for sale. Contact us for more information about it.

This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min and a main spindle power of 11 kW, it includes accessories like steady rests, a hydraulic chuck, and tool holders. Consider the opportunity to buy this Pinacho Taurus 260 horizontal turning machine. Contact us for more information about this machine.

This 5-axis DOOSAN 2600 SY turn-mill centre was manufactured in 2015. It features a Fanuc CNC, a maximum turning diameter of 375 mm, and lengths up to 760 mm. The machine includes a motorized turret with 24 positions and motorized tools capable of 5,000 rpm. Ideal for complex machining tasks. Consider the opportunity to buy this DOOSAN 2600 SY turn-mill centre. Contact us for more information about this machine.

This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information.

This 6-axis Miyano BX-26S was manufactured in 2010, featuring a maximum blank diameter of Ø26 mm and a maximum working length of 330 mm. It includes a dual-spindle setup with rotation speeds up to 8000 rpm and a linear turret with 18 total tools. The machine is equipped with a FANUC 18i-TB control system, supporting 6 controlled axes and 4-axis simultaneous interpolation. If you are looking to get high-quality turning capabilities consider the Miyano BX-26S machine we have for sale. Contact us for more information.

This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine.

Dimensions (L/W/H): 1720x760x1160 mm Weight: 230 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information.

Reference Num.: 4402 Brand: Polly Type: 266 APH Construction year: 1998 Available: directly Status: In production Location: Deutschland Printing units: 2 Equipment: - VARN Kompac III - Registerfernverstellung - IR-Trockner - Puderapparat - Hochstapel Ausleger - verl?ngerte Auslage - Wendung 2:0 / 1:1 - Schuppenanleger

This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information.

This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine.

Key data: 4850 , 1768 , 80

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

Fabricante DMG-MORI Modelo DMF 260 Año 2011 CNC SIEMENS SINUMERIC 840D Mesa Superficie de la mesa 2.900 x 700 mm. Peso máximo sobre mesa 2.150 kg. Recorridos y avances Longitudinal (Eje X) 2.600 mm Transversal (Eje Y) 700 mm Vertical (Eje Z) 700 mm Avance rápido de los ejes (X,Y,Z) 40 m/min Avance de trabajo de los ejes (X,Y,Z) 40 m/min Aceleración de los ejes 4 m/s2 Cabezal Revoluciones 14.000 mm/min Cono cabezal SK 40 DIN 69872 Potencia motor principal 18,4 / 14 kW Cargador automático de herramientas Nº Herramientas cargador 30 Longitud máxima de herramienta 300 mm Peso máximo herramienta 6 kg. Diámetro máximo herramienta con posiciones adyacentes libres 130 mm Diámetro máximo herramienta sin posiciones adyacentes libres 80 mm Equipamiento Refrigeración 40 Bar / 600 l. INCLUDO Evacuador de viruta longitudinal INCLUDO Pistola de limpieza tala ...

In excellent condition, shaft drive.

General SKU388X980 MakeSeitz Enzinger Noll TypeTerra 60125 CWF Mach.No.14102 Year of construction1983 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.26 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4571 (316Ti) Nutsche filtercheck Filter surface0,26 m² Capacity143 l. Vessel sizesDia. 600x500 mm Plate sizesDia. 580 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletDN30 With jacketcheck volume 6,8 l. Max. temperature165°C Motor9 kW, 380 volt With hydraulic unitcheck Information Mounted on legscheck LocationBarneveld Mounted on wheelscheck Floorspace1,40x0,95 m Total height1,90 m Weight830 kg Extra SpecificationsWith hydraulic bottom opening and closingNutsche filtersSeitz Enzinger NollFilters > Nutsche filtersBrand > Seitz Enzinger Noll What  ...

General SKU437W1415 LocationBarneveld Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm Information MakeMedimex TypeMED 265 Mounted on legscheck With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400, stainless steel vertical pressure vessel, volume approx 30 l. Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- ...

General SKU071E290 MakePall TypeFilter housing CA 26798 D00 No.J329 Year of construction1993, With jacket, Max. Temp. 185 Degr. C. LocationBarneveld Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles3 MaterialStainless steel Candle filters FilterFilter housing (1x) Information Floor space1,2x0,8 M Total height2,0 M Weight130 KG Extra SpecificationsVessel holds 3 cartridgesCandle filtersPallFilters > Candle filtersBrand > Pall What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A Sahm precision cross winder 260E is offered. Traverse width stroke: 300mm, winding speed max.: 500m/min, bobbin diameter: up to 320mm, bobbin volume max.: approx. 22.4dm³, titer range: tapes: approx. 150dtex - 3500dtex, monofilaments diameter: 0.15mm - 0.60mm. Inspection by appointment possible.

2 SAHM precision cross winders type 260 are offered. Year of manufacture 1985. Each machine has 2x 96 positions 192 positions total, plus 10 additional reserve heads, total 202 positions. Traverse stroke: 13inch approx. 330mm. Mandrel diameter for sleeves: 3 1/4inch approx. 82.5mm. Inspection by appointment possible.

This Hyundai Wia HD 2600 horizontal turning machine was manufactured in 2025. It features a swing over the bed of 630 mm, a maximum turning diameter of 460 mm, and a bar capacity of 80 mm. The spindle supports a speed of 3,500 rpm with a motor power of 26/18.5 kW. It also includes a 10-tool turret and a rapid traverse rate of 24/30 m/min. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia HD 2600 machine we have for sale. Contact us for more information.

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

General SKUR1377 LocationBarneveld CEcheck MakePfeiffer Vacuum (D) Main Features Volume50000 Ltr. Motor3 KW Specified Features - Vacuum pump MaterialStainless steel PumpRevoDry 50 SM Capacity50 M3/h With motor3 kW 230/400 volt Information TypeRevoDry 50 SM / TRH 261 Mach.No.PP S10 029/21136382 Year of construction2006 Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,7 M Total height1,6 M Weight325 Kg Extra SpecificationsPfeiffer vacuum pumping station with TRH 261 turbo pump and RevoDry 50 SM dry vacuum pump Vacuum pumpsPfeifferPumps > Vacuum pumpsBrand > Pfeiffer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...

Key data: 2600 kN

Engel Victory 2460/260 Tech Ecodrive with the Engel Viper 20 robot / Hybrid machine / Operating hours: approx. 10,000 h in automatic mode Year of Make: 2021 Injection unit: Screw diameter: 70 mm Injection weight: approx. 1100 g Spray pressure: 2000 bar Dosing volume: 1212 ccm Clamping unit: Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: Production line with the Engel Viper 20 robot Machine in perfect technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Operating hours: approx. 10,000 in automatic mode Air Valve x 5 Hydraulic core pull x 2 on the side of the movable clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Injection unit is wear-resistant and resistant to corrosio ...

Engel Victory Victory 1350/260 Tech Ecodrive with the Engel Viper 20 robot / hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 55 mm Injection weight: approx. 590 g Spray pressure: 2183 bar Dosing volume: 618 ccm Clamping unit : Clamping force: 260 t Spar spacing: 0x0 mm Size of the mounting plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Production line with the Engel Viper 20 robot Machine in very good technical condition Tie-bar-less, hybrid machine: energy-saving and very quiet Air valve x 8 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the fixed clamping plate Hydraulic core pull x 2 on the side of the movable clamping plate Control with hot runners x 18 Injection unit is wear-resistant and resistant to corrosion Main motor of the ma ...

Centrifugal pump, motor 7,5hp/11,5kw; 1400RPM;60m3/h; Id No: 21973. Closed hygienic centrifugal pump with open impeller. The pump meets the highest requirements of the food, pharmaceutical, chemical and water treatment industries. Parts in contact with the working environment are made of stainless steel CF-3M 1.4404/AISI 316L. The clamp body and seal are designed to be quickly disassembled for inspection, cleaning and maintenance. All dimensions are indicated in the drawing. The passport contains the following technical characteristics: liquid lifting height up to 25 meters, volume of pumping liquid up to 1000 l/min (60 m3/h)

DPP-260R blister packing machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. The machine is in very good condition, regularly serviced and ready for further operation. The DPP-260R blister packaging machine is used in the pharmaceutical industry to automatically pack, among others, tablets, capsules and pills into blister packages. In one working cycle, the machine dispenses products, closes the blister with a film, prints the date/batch number and cuts off the finished packaging. The high repeatability and precision of the packaging is ensured by a range of reliable components with the best technical parameters. The extremely stable construction also meets the strict GMP standards and ensures easy maintenance of the machine. All of this makes the offered automatic blister packaging machine the perfect choice for increasing the efficiency of medical produc ...

Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 2000 mm - from location D - 14943 Luckenwalde

Key data: 376 mm, 760 mm

Description CNC turning-milling center Doosan Puma 2600 SYII with Fanuc control i series with accessories The machine has been used little, has about 2000 hours of operation so like new and is available now Additional Accessories Lathe Doosan Puma 2600 SY II -2 tool holders for external turning tool 25x25 -1 tool holder double for external turning tool 25x25 -1 tool holder for frontal machining 25x25 -2 tool holders for internal turning tools (boring rods) diameter 50mm -1 tool holder double for internal turning tools diameter 32 mm -1 tool holder for parting tool -1 tool holder double right for external tool (sub-spindle) -1 tool holder double left for external tool (main spindle) -4 motorized tool holders ER-32 radial (X axis) -5 Motorized Tool Holders ER-32 Axis (Z Axis) -1 motorized tool holder ER-32 radial (X axis) with internal coolant supply -1 motorized tool hold ...

capacity 90 degrees: round: 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 90 degrees: flat: 400 x 260 mm : 250 mm : 240 x 240 mm : 240 x 260 mm : 250 mm : 250 x 250 mm : 290 x 250 mm capacity 60 degrees: round: 160 mm capacity 60 degrees: square: 160 x 160 mm capacity 60 degrees: flat: 110 x 260 mm : 190 mm : 190 x 190 mm : 210 x 190 mm dimensions of the machine ca.: 1700x2000x1600 mm weight of the machine ca.: 960 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 350 mm turning length: 1186 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.