truck man 26 used for sale

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Lippert belt conveyor GF 2655-550-400 RA1675 Technical data: Conveying length (NL): 2655 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): 0.31 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.55 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Year of manufacture. 2001 Optionally available: Supports Side guide one and both sides Frequency converter for steples speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2655 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,55/S1 Conveyor speed m / s: 0,31 scope of delivery: without supports and side guides For individual ...

MICROCUT CHALLENGER BNC-2640X, year 2006 -Fagor 8055 -Maximum turning length 1500 -Spindle bore 105 -Turning diameter in the offset 790 -Turning diameter over bed 550 -Turning diameter via face slide 310 -Rod passage 69 mm -X-Path 300, Z-Path 1650 -8 tool positions

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Vacuum machine Manufacturer: Supervac Lid with plexiglass window On wheels with brakes Microprocessor control with vacuum sensor Integral vacuum pump with motor protection Reliable and easy to service Easy to clean Simple to operate Chamber dimensions: 800x730x250mm Seal lenght: 4x 660mm

tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

260 cm working width, with Volvo BM mount suitable for L50-L120 wheel loaders (as well as Liebherr, Komatsu etc.)

Suitable for Yanmar VIO 75 mini excavator/Nabtesco, model MSP 00 2609

Two identical DEK stencil printers are available. Printing speed: 150mm/s, max. printing dimensions X/Y: 510mm/489mm, max. stencil dimensions X/Y: 510mm/508mm, min. stencil dimensions X/Y: 71mm/38mm, max. product thickness: 6mm. Machine dimensions X/Y/Z: approx. 1350mm/1400mm/1500mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Clamping Force: 150 ton // Mould Height (Max): 730 mm

Pero Washing Machine Technical data see in the VBilder

sheet width: 2600 mm plate thickness: 5 mm rear stop: 1000 mm cutting angle: 1°06 ° no. of strokes: 45 Hub/min voltage: 380 V / 50 Hz total power requirement: 5,5 kW weight: 4500 kg dimensions of the machine ca.: 3600 x 2200 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pero Washing Machine 2600/016GR.2W-4667

With overhauled rotors. Included hydraulic-unit and control panel build in container. With conveyor for outlet.

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22410, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/137, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-used/22418, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Engine Brand: CATERPILLAR, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/136, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: LLE-2644644; Transport weight [kg]: 5500

Inv. Num. : 8814 Type: IRB 2600 Producer: ABB Created: 2014 Parameters: Operating hours: 5162 h Maximum arm reach: 1650 mm Maximum load capacity: 12 kg Machine weight: 150 kg

Used Carrier 30 HXC 265 water cooled chiller on R134A. Complete with 2x Carrier 06NW2300S5EA-A00 & 1x Carrier 06NW1250S7EA-A00 semi-hermetic screw compressors, shell and tube condenser, shell and tube evaporator, 2 oil pumps, control cabinet with a display. Specifications: Brand: Carrier Type: 30 HXC 265 Product type: Water cooled chiller Capacity kW: 911,3 Capacity Tons: 259,1 Refrigerant: R134A Weight in kg: 4492 Sizes: 4250x900x2060 mm (LxWxH) Compressors: 2 Carrier 06NW2300S5EA & 1 Carrier 06NW1250S7EA-A00 Display: Carrier display

Continuous Pallet roller conveyor 2690-200-120 RA2444 Pallet roller conveyor segment, split Conveyor length (FL): 2690 mm Frame width (RB): 200/120 mm Roller spacing / pitch 75 mm Frame height: 90 mm Includes 2 brake rollers and two stoppers Stoppers only for cross loading, longitudinal loading requires disassembly Can also be loaded longitudinally with a pallet truck, but without the middle brake rollers Floor mounting possible without middle brake roller Lanes should be installed with a slope of 3-5% Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) Conveying length in mm: 2690 Nominal / outside width in mm: 200, 120 Roll division in mm: 75 Driven: NO scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einf ...

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Dimensions (L/W/H): 1480x760x1160 mm Weight: 180 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1720x950x1260 mm Weight: 250 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x2800x1100 mm Weight: 330 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2600x3010x1250 mm Weight: 500 kg Total power requirement: 3,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2285x1420x1730 mm Weight: 1600 kg Total power requirement: 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Mechatronika reflow soldering oven with automatic conveyor with stainless steel mesh is available. Conveyor width: 260mm, max. PCB component height: 25mm, heating length: 900mm, max. temperature: 280°C, conveyor speed: 180mm/min. Machine dimensions X/Y/Z: approx. 1650mm/600mm/400mm, weight: approx. 80kg. Documentation available. On-site inspection is possible. Image is an example.

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Arburg ARB 267 1 818 310 011-2V1 SN 109302 (267) Bosch B 830 303 314 Prop. Verst Hersteller: Arburg / Bosch Teilenummer: SN 109302 / 1 818 310 011-2V1 Leiterplatte Number: Bosch B 830 303 314 Type: ARB 267 Anwendung: Ersatzteil für Arburg Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 11062623

-Manufacturer: Seewer AG -Model: SFT 262,+ 23 -with 2 cutting rollers band is renewed -Mobile on castors

5-speed station wagon Holzmann K5-260VF, good condition, standard equipment, 1200 mm cutting length, 3 knives, 450 kgPrices subject to change, errors, printing and typesetting errors excepted

AJAN SHP 260 plasma-gas cutting machine was built in 2015 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd Şti. The machine, distinguished by its high efficiency, is an excellent choice for thermal cutting of sheet metal. The machining process is performed by means of reliable torches, located on two separate gantries. This solution, combined with the large surface area of the work table, enables the machining of more than one sheet at a time with different cutting methods. The AJAN plasma-gas cutting machine is offered with equipment that includes, among others, a HYPERTHERM plasma source of the highest energy efficiency, exhaust extraction and a track. The total weight of the machine is 520 kg. Technical specifications of the AJAN SHP 260 plasma-gas cutting machine - CNC controller: AJAN - working table dimensions (L x W): 16000 x 3000 mm - plasma source: HYPERTHERM - plasm ...

This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min and a main spindle power of 11 kW, it includes accessories like steady rests, a hydraulic chuck, and tool holders. Consider the opportunity to buy this Pinacho Taurus 260 horizontal turning machine. Contact us for more information about this machine.

This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information.

This 6-axis Miyano BX-26S was manufactured in 2010, featuring a maximum blank diameter of Ø26 mm and a maximum working length of 330 mm. It includes a dual-spindle setup with rotation speeds up to 8000 rpm and a linear turret with 18 total tools. The machine is equipped with a FANUC 18i-TB control system, supporting 6 controlled axes and 4-axis simultaneous interpolation. If you are looking to get high-quality turning capabilities consider the Miyano BX-26S machine we have for sale. Contact us for more information.

This 5-axis DMG DECKEL MAHO DMF 260-11 was manufactured in 2017. A universal machining centre featuring a travelling column, X-axis linear drive at 80 m/min, and a motor spindle speed up to 15,000 min-1. It includes a swivel head, a 30-tool magazine, and a rigid table measuring 3,200 x 1,100 mm. Consider the opportunity to buy this DMG DECKEL MAHO DMF 260-11 universal machining centre. Contact us for more information about this machine.

This 5-axis AJAN PP 260 A-5T plasma cutting machine was manufactured in 2015. It features a robust AJAN PP260A power source with a cutting capacity of up to 65 mm for mild steel and 50 mm for stainless steel and aluminum. The large working area spans 2000 mm by 8000 mm, and it includes an AJANCNC 952 Controller for precise control. Consider the opportunity to buy this AJAN PP 260 A-5T plasma cutting machine. Contact us for more information.

Dimensions (L/W/H): 1720x760x1160 mm Weight: 230 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This CASATI BIG 2600 was manufactured in 1995. It features a double-knife system with both upper and lower knives that trim veneer bundles from both sides simultaneously, ensuring precise cuts. The machine offers a substantial working width with a usable cutting length of 2600 mm, ideal for preparing veneers for furniture and doors. Consider the opportunity to buy this CASATI BIG 2600. Contact us for more information.

This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine.

Reference Num.: 4402 Brand: Polly Type: 266 APH Construction year: 1998 Available: directly Status: In production Location: Deutschland Printing units: 2 Equipment: - VARN Kompac III - Registerfernverstellung - IR-Trockner - Puderapparat - Hochstapel Ausleger - verlängerte Auslage - Wendung 2:0 / 1:1 - Schuppenanleger

Key data: 4850 , 1768 , 80

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Condition: Very good Technical Specifications: Clamping force: 485 T / 4850 KN Tie bar spacing: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max): 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Screw diameter: 80 mm L/D ratio: 20 Additional Features: 4 hydraulic cores 1 air blow gun 2 junction boxes with 8 channels each Power panel: Rear: 4 three-phase sockets, 1 neutral, 1 ground Front: 1 three-phase socket, 1 neutral, 1 ground Dimensions & Weight: Weight: 21,500 kg Overall dimensions (L x W x H): 8.71 x 2.65 x 2.14 m

Fabricante DMG-MORI Modelo DMF 260 Año 2011 CNC SIEMENS SINUMERIC 840D Mesa Superficie de la mesa 2.900 x 700 mm. Peso máximo sobre mesa 2.150 kg. Recorridos y avances Longitudinal (Eje X) 2.600 mm Transversal (Eje Y) 700 mm Vertical (Eje Z) 700 mm Avance rápido de los ejes (X,Y,Z) 40 m/min Avance de trabajo de los ejes (X,Y,Z) 40 m/min Aceleración de los ejes 4 m/s2 Cabezal Revoluciones 14.000 mm/min Cono cabezal SK 40 DIN 69872 Potencia motor principal 18,4 / 14 kW Cargador automático de herramientas Nº Herramientas cargador 30 Longitud máxima de herramienta 300 mm Peso máximo herramienta 6 kg. Diámetro máximo herramienta con posiciones adyacentes libres 130 mm Diámetro máximo herramienta sin posiciones adyacentes libres 80 mm Equipamiento Refrigeración 40 Bar / 600 l. INCLUDO Evacuador de viruta longitudinal INCLUDO Pistola de limpieza tala ...

In excellent condition, shaft drive.

General SKU388X980 LocationBarneveld MakeSeitz Enzinger Noll Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.26 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,26 m² Capacity143 l. Vessel sizesDia. 600x500 mm Plate sizesDia. 580 mm Vessel can be tiltedcheck Top connectionscheck Liquid outletDN30 With jacketcheck volume 6,8 l. Max. temperature165°C Motor9 kW, 380 volt With hydraulic unitcheck MaterialStainless steel 1.4571 (316Ti) Information TypeTerra 60125 CWF Mach.No.14102 Year of construction1983 Mounted on legscheck Mounted on wheelscheck Floorspace1,40x0,95 m Total height1,90 m Weight830 kg Extra SpecificationsWith hydraulic bottom opening and closingNutsche filtersSeitz Enzinger NollFilters > Nutsche filtersBrand > Seitz Enzinger Noll What  ...

General SKU437W1415 MakeMedimex TypeMED 265 Mounted on legscheck Pressure Working pressure300 Bar Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity20 l. Vessel sizesDia. 550x600 mm Dished bottomcheck OutletPneumatic valve With jacketcheck With propellor stirrercheck Motor0,37 kW, 220/380 volt, 1410 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace1,10x1,0 m Total height2,20 m Weight850 kg Extra SpecificationsWith ToolTemp temperature controller, type TT400,stainless steel vertical pressure vessel, volume approx 30 l.Stainless Steel ReactorsMedimexReactors > Stainless Steel ReactorsBrand > Medimex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compar ...

General SKU071E290 MakePall TypeFilter housing CA 26798 D00 LocationBarneveld Main Features MaterialStainless steel Specified Features - Candle filter Candle filtercheck Number of candles3 With jacketcheck Candle filters Filter:Filter housing: (1x) Specified Features - Candle filter MaterialStainless steel General No.J329 Year of construction1993, With jacket, Max. Temp. 185 Degr. C. Floor space1,2x0,8 M Total height2,0 M Weight130 KG Extra SpecificationsVessel holds 3 cartridgesCandle filtersPallFilters > Candle filtersBrand > Pall What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!