truck man 26 used for sale

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 7 mm -Number of teeth: 264 teeth -Inside: Ø 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 1x saw blade available -Weight: 10.3 kg

tow bar, trailer coupling -Manufacturer: Rockinger, trailer coupling automatic with bracket -Type: 260G150 -Support load: 1000 kg -Towing capacity: 9.5 t -Transport dimensions: 360/360/H280 mm -Total weight: 26.8 kg

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type MDS-C1-SPH-260 For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Bezel, steady rest, lynette -Bezel: with substructure, max. passage Ø 265 mm -Centre height: 340 mm -Edition: Brass -technical drawing: in the photos -Dimensions: 660/130/H900 mm -Weight: 122 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels -Manufacturer: Deestone, tire with rim -Tire size: 26x12.0-12 NHS -Bolt circle: Ø 206 x 20 mm -Hub bore: Ø 160 mm -Number: 5 tires available -Price: per piece -Dimensions: Ø 635 x 270 mm -Weight: 74 kg/unit

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 260 x 1000 mm -T slots: 16 mm

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Condenser Centauro Type: ACI/R 263/96.9Y Cooling capacity: 48,3 Kw Air flow: 11400 m3/h Number of fans: 2x630 mm RPM: 660/520 Dimensions: 2880x630x1230 mm Entry/exit diameter: 42/35 mm Quantity in stock:1 Stock number: SK104 Condition: Used

Mixer M 260, volume 260 l, max. load 160 kg, connected load 400 V / 2.2 kW Mixer M 260, Volume 260 l, max.capacity 160 kg, electrical connection 4 V / 2,2 kW

WE ARE SELLING AN NICE CONDITION TRUMPF ROTATION. MACHINE IS READY FOR USE. MACHINE INCLUDES ALSO TOOL GRINDER AND EXISTING TOOLS FOR CUSTOMER WE ORGANIZE TRANSPORT AND DISMANTLING AS WELL

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

Lippert Belt Conveyor Belt Conveyor Aligner Conveyor Sorter GF 2640-650-500 RA2048 Technical data: Conveying length (NL): 2640 (1340 + 650 + 650) mm Framework width (NB): 1300 mm belt width (GuB): 500 mm height (BH): 540 to 860 mm support feet: includet Conveying speed (v m/s): 0,8 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Slide travel: 370 mm Year of construction: 2001 Optionally available: controlling/Software Frequency Converters Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 2640 Nominal / outside width in mm: 1300 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 1,30 Conveyor speed m / s: 0,8 scope of delivery: Lichtschranken, inklus ...

Control Siemens 840Dsl Speed [rpm] 24000 Travel X/Y/Z [mm] 2600/1700/950 Tool Attachment HSK-A63 Spindle: Technology Swivel head with motor spindle Speed 24,000 rpm Power (max.) 15 kW Torque (max.) 14.3 Nm Tool holder HSK-A63 A-axis +/- 120° C-axis 270° General: Tool Magazine 18 Stations Clamping area 2,350 x 1,700 mm Rapid traverse in X/Y/Z 80/80/60 m/min Equipment/accessories: Workpiece Measurement Probe, m&h RWP 20.50 Tool Measurement Laser, Hexagon Tool breakage detection stylus, m&h TS 35.20 Setup operation Electronic handwheel 3D extruder CEAD S25 Granulate dryer/conveyor Vismec Other equipment spindle coolers

Transnorm conveyor belt GF 2600-600-500 RA2237 Technical data: Make: Transnorm Conveyor length (NL): 2600 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R17 DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2600 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conv ...

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Balemaster Year: 2006 Type: CMG 268 Waste compactor

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Transnorm conveyor belt GF 2670-600-500 RA2068 Technical data: Conveyor length (NL): 2670 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,67 Drive: SEW gear motor R17 DT71D4/Th Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 2670 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m / s: 0 ...

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

We sell 10032 x Micron 8GB DDR4 2666MHz Dual Rank Server Memory Manufacturer: Micron P/N: 18ASF1G72PDZ-2G6E1 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complet ...

We sell 18,000 x 8GB True DDR4 2666Mhz 2Rx8 1.2 RDIMM Server Memory and 1,000 x 8GB True DDR4 2666Mhz 4Rx4 1.2 LRDIMM Server Memory All this will be available in 10 days. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HA ...

Tersa Knife Shaft Motor 3x 3HP, 400V, 50Hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Mandrel 3000/6000 rpm Sliding table 1450 x 320mm Cutting length 1200mm Mitre fence Eccentric clamps Weight 485kg G&RO-HX260-CE

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Key data: 2 KW, 40 mm

gebr. Spigot cutting and slitting machine with lifting spindle PANHANS TYPE 261H YOC 1993 Manual / automatic operation Lifting spindle autom. Changing the splintered wood Longitudinal stop LAS (HOFFMANN) Pneumatic workpiece clamping Sliding carriage length: 2.50 m Shortcut saw: Motor power: 2.5 kW Max. saw blade diameter: 400 mm max. cutting height: 130 mm Lateral adjustment: max. 100 mm Suction nozzle: 80 mm Milling machine: Motor power: 7.5 kW Milling mandrel: 40 mm Max. tool diameter: 350 mm Suction nozzle: 200 mm Largest tenon length: 140 mm Clamping height: 235 mm Lifting height: 120 mm Rolling table height adjustment: 80 mm Engine brake All pneumatic hoses renewed Weight: approx. 680 kg Manufacturer information

The Compact Series The new Wanner granulators of the C's series ("C" stands for "compact", "s" stands for "silent") offer practical solutions for almost all problems for the in-line recycling of sprues and defective parts in the production process. Due to the modular design, the granulators of the C's series can be easily adapted to the respective application or the needs of the company. Depending on the method of feeding the sprues, the disposal of the regrind, or the type of sprue used, Injection molding machine, the C's series from Wanner offers optimal solutions that can be adapted to your respective operating process through a variety of standard components. The optimised cutting geometry and the low rotor speed guarantee high-quality regrind with a low dust content, sound-insulated insertion shafts and The grinding chamber structure optimised in terms of structure-borne  ...

Transnorm conveyor belt GF 26000-1100-1000 RA2289 Technical data: Conveyor length (NL): 26000 mm frame width (NB): 1100 mm, 1200 mm with motor belt width (GuB): 1000 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, R63DT100LS4TH Electrical data: 50Hz V380-500, kW 2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 26000 Nominal / outside width in mm: 1100 Belt width in mm: 1000 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 2,2 Conveyor speed m / ...

1 CNC lathe (lathe) 2 CNC lathe (lathe) 3 CNC lathe (lathe) 4 CNC milling machine (lathe) 5 2x conventional lathe (lathe) 6 Band saw 7 2x Stand drill All machines work perfectly Pick-up or delivery not until the end of July 2024

Technical data approx.: - Largest turning diameter - over bed 560 mm - via flat slide 315 mm - Center width 1500 mm - Traverse transverse slide approx. 300 mm - Spindle bore 80 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 150 mm - Spindle speeds 1 - 2500 rpm - Rapid traverses X / Y -with: - NC – FANUC control - 2 E. handwheels for manual turning -Tailstock - Coolant device - Drive 400 V / 7.5 kW - Space requirement approx. W 3250 x H 1750 x D 1500 mm - Weight approx. 3800 kg

Key data: 760 mm, 1540 mm

CNC turning/milling center DOOSAN PUMA MX2600ST Year of construction 08-2012 Fanuc 31i-A with Manual Guide i Max. turning diameter: 760 mm Max. swing diameter over bed: 1,000 mm Max. turning length: 1,540 mm Max. bar passage: 76 mm Travel: X1 axis: 630 mm Y1 axle: 230 mm Z1 axle: 1,585 mm B-axis: -120° + 120° X2 axis: 220 mm Z2 axis: 1,515 mm A-axis: 1,550 mm Spindle motor main spindle 22/26 kW Spindle nose A2-8 Max. spindle speed 4,000 rpm Spindle motor sub-spindle 22/26 kW Max. spindle speed 4,000 rpm Spindle nose A2-8 Spindle motor milling spindle 22/18.5 kW Capto C6 Max. spindle speed 12,000 rpm B-axis, 0.001° Tool magazine with 40 tool positions Lower turret, 12-speed BMT65P Max. speed driven tools: 4,000 rpm Cooling by the spindle, 1.5 kW, 2.0 MPA, 21.6 l/min Coolant pump for lower turret, 2.2 kW, 1.0 MPA, 30l/min Coolant for powered tools Co ...

Key data: 260 mm, 520 mm, 16 U/min

mcm TC 260-105-1500 Premium - Lathe (new) Included premium equipment: - Heidenhain ND5023 3-axis position indicator - 5-position longitudinal stop for the saddle - SRW-Amestra Multifix C quick-change holder with 4 inserts - LED workplace lighting - Set of leveling pads from Spinelli Standard equipment: - Bed, base, headstock, tailstock & sled made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - High-precision spindle bearing - Double mechanical coupling - electromagnetic brake - Fast feeds - Pneumatically assisted tailstock movement - Electronic components from Siemens and/or Schneider - Safety devices in accordance with EC standards: plexiglass safety lining guard with microswitch, turret plexiglass safety guard, rear guard along the entire length of the machine, protection of lead screw and feed r ...

Gebr. Bayer GB-2680N - Industrial bench grinder with drill grinding device - Drill grinding device - Diamond puller - Cooling water pump - Machine light Specification - Grinding wheel Ø: 210 / 280 mm - Grinding wheel width: 40 mm - Speed: 1450 rpm - Motor power: 1.5 kW - Dimensions WxHxD: approx. 1450 x 1600 x 1300 mm - Weight: approx. 300 kg

Key data: 250 mm, 604 mm

CNC Double Spindle Turning Center 8-Axis Goodway GTZ-2600Y Year of construction 2015 First commissioning at the end customer in 2018 Siemens 828D CNC Control 8-axis Turning diameter 250 mm Turning length 600 mm Main spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Sub-spindle: Bar passage 65 mm. Spindle drive power 11 kW. Spindle speeds 4,000 rpm. C-axis 0.001°. Counter spindle longitudinal travel B: 690 mm. Tool turret I 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X1 : 195 mm Longitudinal travel Z1: 620 mm. Perpendicular travel Y: +/- 50 mm (for off-center machining) Tool Turret II 16-speed Driven positions (possible) 16 Tool drive power 3.7/5.5 kW Tool speeds up to 6,000 rpm. Flat travel X2 : 210 mm Longitudinal travel Z2: 620 mm.  ...

Description Cycle lathe Chevalier FCL-2660 Details Year of construction 2008 Machine no. A40307 C52 Height 2,150 mm Width 2,100 mm Length 3,900 mm Bed width 450 mm Bed height 1,000 mm Bed length 3,600 mm Face plate Ø 620 mm Forkardt Chuck Ø 315 mm Max. workpiece lengths 1,800 - 2,000 mm Turning diameter over bed 660 mm Turning diameter over support 400 mm Center height 330 mm CNC Fagor Cycle Control Lynette Ø 400 mm Outer and inner bolsters

Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 260 mm, unused -Groove width: 24 mm -Hole: Ø 50 x 45 mm -Number: 2x pulley available -Price: per piece -Dimensions: Ø 260 x 45 mm -Weight: 6.6 kg/pc.

dimensions of saw-band: 3350x27x0,9 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300x260 mm capacity 45 degrees: round: 200 mm capacity 45 degrees: flat: 180x180 mm : 130 mm : 120x120 mm : 25 mm min. dia.: 5 mm work height max.: 900 mm : 35/75 m/min weight: 710 kg Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260  ...

MEP Shark 260 Price 1650 Adjustable gravity lowering Round tube cutting capacity mm. 210mm. at 90° Cutting capacity with square cross-section mm. 200mm. at 90° Cutting capacity other cuts 270x200 mm. Head motor power kw.1.8 Engine revolutions 2 speeds RPM 36 - 72 Strip development diameter 2750 x 25.4 s. 09mm. User Manuals CE Declaration of Conformity Machine weight kg. 350

Welding current max. 260 A 260 A at 60% ED 201 A at 100%ED Remote Controller SELCO RC08 Space requirement L - 560 x W - 240 x H - 400 mm Weight approx. 37 kg

sheet width: 2500 mm plate thickness: 0.8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mm saw band length: . mm cutting width: . mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 671 Kw, Rated Speed: 1200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3508c-lle-2644 644-new/201, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 5.500 kg, Type number: LLE-2644644