133,957 used machines on RESALE, but how to find them? Machine Search
CNC surface and profile grinding machine Control: DGT-Plus, Siemens Working area: Max. grinding length with table true running 1100 mm Max. grinding width 550 mm Grinding height (table-bottom edge grinding disc) 450 mm Table clamping area 1000 x 500 mm Table-speed 1/40 m/min Table load (without magnetic plate) 1200 Kg Table load (with magnetic plate) 975 Kg Grinding spindle: Three-phase current motor spindle 11 kW Grinding disc (outside x width x bore) 406 x 152.4 x 100 mm Revolutions 1400 Longitudinal axis (z-axis): Rapid movement 5 m/min Adjustable feed 1/50 mm Step-less adjustable feed 0/2000 mm/min Min. delivery 0.001 mm Working area 500 mm Total stroke 645 mm Vertical axis (Y-axis): Rapid movement 1.5 m/min Min. delivery 0.001 mm Working area 610 mm Total stroke 645 mm Space requirement: L x W x H 4450 x 2935 x 2540 mm Total weight: about 6700 ...
Grooving machine RAUSCH RS 6-1300 with extensive accessories -Slide stroke / stroke length max. 1300mm -Pulling force 6000 kg -Operating voltage 380 volts -including 38 x broaching pins -including 95 x guide bushes -Intermediate leaflets -Crane -Workbench -Pedestal -2 x Tool cabinets Dimensions: LxWxH 1.6x1.7x2.3 meters / weight 2000 kg
Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000m ...
Twist Drill Bit Grinding Machine DAREX SP 2500 -Grinding diameter 1.5-26mm -3x tool holders -1x spare grinding wheel -Machine substructure -Documentation Dimensions: LxWxH 0.5x0.5x1.6 meters / Weight 80Kg
Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible.
A used manual tool grinding machine from Saacke is offered. Table size X/Y approx.: 850mm/145mm, travels X/Y/Z approx.: 450mm/250mm/250mm, center height approx.: 125mm, max. grinding length approx.: 500mm, machine dimensions X/Y/Z approx.: 1500mm/1100mm/1500mm, weight approx.: 850kg. Inspection by appointment possible.
Key data: 150 mm, 6800 mm
Long belt sanding machine Langzauner LZG-E Long Fence Long Belt Sanding Machine, Belt Sanding Machine, Good Condition A long-belt sanding machine from the manufacturer Langzauner is offered here. The machine is in good condition, has a high quality workmanship and is comfortably equipped. A turntable is installed in the table (retractable) so that the workpiece can be rotated quickly. The turntable is raised slightly at the touch of a button by means of a pneumatic cylinder, so that the workpiece can be rotated without much effort. A high-quality and fully equipped sanding machine. Technical data: Table dimensions 2500 mm x 1000 mm Large stand load 1000 mm Motor power sanding belt 3/4.2 kW Fan motor power 1.1 kW Belt speed 11/22 m/sec Belt length 6800 x 150 mm (incl. spare sanding belts) Table height adjustment range 280 mm Electric table height adjustment Weight appro ...
Color: RAL 7035 light grey, RAL 7012 basalt grey, RAL 5012 blue grey, the machine’s inverter is defective. Accessories: electromagnetic clamping plate 400x250mm, with pole pitch 5mm and holding force control, automatic vertical infeed with infeed program and digital display for vertical and cross movement, automatic central lubrication system, wet grinding unit with paper belt filter system for filter paper 460x200mm with filter fineness 0.016–0.025mm, electric wheel dresser with dimensional compensation and operating manual. An on-site inspection is possible.
Grindable diameter from 2 - 40 mm. Smallest and largest point angle: 40 – 180 °. For right- and left-hand cutting tools, 1-12 cutting edges. For sharpening twist drills, step drills, taps. Accessories and an instruction manual are provided.
Key data: 1350 mm, 3 , 150 mm
HESEMANN Multi-purpose surface sanding machine MFA 10 Grinding width 1,350mm TRANSVERSE / LONGITUDINAL / LONGITUDINAL DLB Feed speed 5-25m/min frequency controlled Conveyor belt cleaning device Working height constant 880 mm Workpiece thickness 3-150 mm Motorized adjustable Pressure roller diameter 50 mm in the infeed of the machine Industrial PC 12 inch Operating System Windows XP, E Touch screen Program Memory for 100 programs 1 transverse grinding unit Sanding belt dimensions 5,400 × 150 mm Belt speed 2-20 m/s frequency-controlled Drive power 15 KW Pressure fin system Blasting device, controlled depending on the workpiece 1 longitudinal grinding unit Abrasive belt dimensions 2,620 × 1,400 mm Belt speed 1.8-18 m/s Drive power, 15 KW frequency controlled, Belt blasting device, controlled depending on the workpiece Synchronous and counter-rotatio ...
This Parpas RUAP 700 was manufactured in 2000. A used cylindrical grinding machine, fully reconditioned and in excellent condition. Features include Siemens Sinumerik 840C control, 700 mm distance between centers, and a maximum workpiece diameter of à 360 mm. If you are looking to get high-quality grinding capabilities, consider the Parpas RUAP 700 machine we have for sale. Contact us for more information.
This 3s OKAMOTO ACC 450 DXA was manufactured in 2001. It features a grindable surface of 450 Ã 150 mm and a longitudinal travel of 530 mm, making it suitable for various grinding applications. With a maximum load capacity of 120 kg on the table, this machine offers robust performance. Consider the opportunity to buy this OKAMOTO ACC 450 DXA surface grinding machine. Contact us for further details.
Key data: 1350 mm, 2 , 150 mm
BÜTFERING AUTOMATIC GRINDING MACHINE SKO 213 RC
This 4-axis DANOBAT HG 91-3000-B8 was manufactured in 2007. It features a CNC control system by SIEMENS 840 D, a maximum grinding length of 3,000 mm, and can handle workpieces up to 5,000 kg. The machine offers a swivel angle from -30º to +180º and a cutting speed of 45 m/s. Consider the opportunity to buy this DANOBAT HG 91-3000-B8 cylindrical grinding machine. Contact us for more information about this machine.
JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles
This Kent KGS 615 WMA1 surface grinding machine was manufactured in 2008. It features a robust table clamping area of 1500 x 600 mm, supporting a maximum load of 1300 kg. The machine is equipped with a powerful grinding spindle motor of 7.5 kW and a standard grinding wheel size of 355 x 50.8 x 127 mm. Consider the opportunity to buy this Kent KGS 615 WMA1 surface grinding machine. Contact us for more information about this machine.
ELB - SWN 5 VA II Surface Grinding Machine -Grinding range X/Y/Z 525x375x255mm -Magnetic plate 700x300mm -Table clamping surface 900x250mm -Table longitudinal stroke 10-625mm -Table load max. 280Kg -Table feed 1-30 m/min -Pendulum grinding 3-30 m/min -Distance - table to spindle center 525mm -Vertical feed speed 2-180 mm/min - Feed size - adjustable 0.001-2mm -Grinding wheel speed 3000 rpm -Coolant device -Machine feet -Documentation -COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 meters / Weight 3500Kg
Surface Grinding Machine ELB SWB06-VAII -Grinding length 600mm -Grinding width 500mm -Spindle speed 1400/2800 rpm -Z - Delivery / Automatic / Manual -Y - Delivery / Automatic / Manual -Grinding Movement / Automatic / Manual - Magnet size 600x500mm -Automatic delivery -Grinding wheels - Pulling device -Grinding wheel diameter max. 300mm -Coolant device -Drive cable approx. 6 KW Dimensions: LxWxH 2.6x2.2x2.5 meters / Weight 3500Kg
Mass finishing machine / WALTHER CC315 incl. control system -Model CC315 -Speed range 945-1445 rpm -Separate control/on/off/timer etc. -Soundproof cover -Waste water cover Dimensions: LxWxH 2x1.6x1.6 meters / Weight 850Kg
G&N Kugelmüller MPS 1 Cup Grinder -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Year of construction 1996 -Drive motor 0.6KW -Machine enclosure -Well-maintained original condition Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150Kg
Stock number: F977, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSB 600
Stock number: F976, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500
FRÖMAG RAPIDA 463 slotting machine incl. platform & accessories -Manufacturable groove widths 3 - 63mm -Largest groove length 600mm -Indexing table -In bores from 10-500mm -Feed size 0.01-0.25mm -Cutting speed infinitely adjustable 2-22 meters /min -Return speed-Constant 50 meters /min -Load capacity 3000 kg -Connected load 4.6 KW -Incl. work platform -Various drawing needles & matching accessories in the tool cabinet Dimensions: LxWxH (machine) 1.6x1.5x2.3 meters / weight 3500 kg
WALTHER Trowal Type CA 650 -Drum diameter 1600mm -Speed 1450 rpm -Timer -CENTRIFUGE -Soundproof cover -Stair landing -Power 11KW Hebkswbtdlon Au S Tsl
Stock number: F978, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Construction: Erecting of plastic bottles etc., Motor: Variable speed, Manufacturer: Groninger, Type: ZSK 1500
A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.
DROOP & REIN - SZ100 Lubrication Groove Drawing Machine -Largest to clamp diameter 140mm Hobswczw Nskn Au S Tel -Bore of the spindle 40mm -Length of the groove in one pull 100mm -Distance between chuck / tailstock tip 350mm -Working speeds - 3 -Electric lining protection -Weight approx. 300Kg Dimensions: LxWxH 0.9x0.6x1.5 meters / Weight 300Kg
Rotary table surface grinding machine ARTER A 3-16 Hobkn Ausvub Sxs S Tel -Grinding diameter max. 450mm -Grinding height approx. 200mm -Workpiece weight approx. 250Kg -Total power requirement approx. 4KW -Coolant device -Machine enclosure -Work light Dimensions: LxWxH 2.5x1.5x1.7 meters / Weight approx. 3500Kg
G&N Kugelmüller MPS 1 -Spindle speed 3150 rpm -Grinding height over magnet 130mm -Magnetic plate 200x100mm -Side grinding wheel puller -Fine adjustment -Drive motor 0.6KW -Coolant device -Machine enclosure Dimensions; LxWxH 0.8x0.7x1.6Meter / Weight 150Kg Errors / input errors excepted Hjbsvtrr Tjkn Au S Tol
Type DTL-20A modified Brush roll height 200 mm Pneumatic Grinding Head Height 200 mm Brush roll diameter 300 mm Pneumatic Grinding Head Diameter 100mm Diameter of spindle 25/30 mm Roller speed: frequency control Electric up and down Power 0.75 kW Transport dimensions 860x750x1100 mm Weight 140 kg Price 2050 Eur (EXW Jonava, Lithuania)
Key data: 340 mm, 160 mm
Surface Grinding Machine Lipemec PM300 XYZ = 340 x 160 x 240 mm Permanent magnet 250 x 130 mm Max. diameter of whetstone 200 mm Distance between table top and spindle axis 315 mm All feeds manually Digital display Heidenhein, 0.001 mm steps on 2 axes Table brake Dressing Diamond
Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible.
Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details.
Key data: 190 mm, 2
Grinding Machine HESS Double-Sided Grinding Machine Type: GLORIA Year of Make: 1995 CE Grinding width 190 mm Grinding thickness 4 – 180 mm Sanding shoe and brush from above Sanding shoe and brush from below Oxyd ceramics are wear-free and therefore maintenance-free Motorized height adjustment with digital display Shortest workpiece length 300 mm oscillating abrasive belts Sanding belt blow-off nozzle Workpiece transport via conveyor belts Sanding belt width 200 mm x sanding belt length 1600 mm Grinding motor 2 x 4 kW Feed speed infinitely variable 5-25 m/min. Feed motor 0.75 kW Height adjustment 0.18 kW Sanding belt speed 24 m/sec. Working height – table height 830 mm Suction connection nozzle diameter 2 x 160 mm Extraction air volume 2x2000-2500 m³/h Machine dimensions: Length 1660 mm x width 1030 mm x height 1820 mm Height with suction nozzle 1930 mm ...
Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cle ...
- With chassis - Belt length, between axles: 6'500mm - Belt width : 300mm - Motor: 400V, 50Hz - With large inlet hopper attachment - Dumping height : approx. 1200mm - Hopper width: 1000mm - With rack and pinion winch - In good condition
Key data: 1350 mm, 3 , 120 mm
Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.
Distance between points: 650 mm, Max external diameter to be rectified: 320 mm, Working wheel dimensions (od x id x width): Ø400 x Ø127 x 80 mm, Ø interior max to be rectified: 140 mm, Height of points: 175 mm, Control type (CNC/manual): CNC, CNC brand: SIEMENS, CNC model: SINUMERIC 3G7, Maximum length to be rectified: 650 mm, Max. piece weight: 130 Kg, Main engine power: 5.5 Kw, Total power: 22 KVA, Max. revolutions of the workhead: 30 - 750 rpm, Strain: 380 V / 50 Hz, X-axis feed: 0.01 – 5,000 mm/min, Z-axis feed: 0.06 – 10,000 mm/min, Air pressure: 5 bar, Max travel X axis: 275 mm, Max travel Z axis: 700, Max. rotation of workpiece table: 8.5º, Inner cone of workpiece head: M 5, tailstock cone: M 3, Counterpoint reed route: 35 mm, Dimensions (length x width x height): 2,815mm x 1,875mm x 2,090mm, Weight: 3.600 Kg
Cylindrical grinding machine manufactured in 2022. This ELMAG CG 800 features a maximum grinding diameter of 200 mm and a grinding length of 800 mm. It is equipped with a robust headstock spindle and transverse feed guide, ensuring precision in grinding operations. If you are looking to get high-quality grinding capabilities, consider the ELMAG CG 800 machine we have for sale. Contact us for further details.
1 Internal and surface grinding machine Make: WEMA Glauchau Model No.: SI 6/1 AS-Nx500 Year of Make: 1989 Grinding depth: 500 mm Workpiece spindle speed range: 40 – 400 mm Distance from workpiece spindle flange up to the grinding spindle carrier: 1450 mm Adjustment range of the internal grinding device: 530 mm Max. workpiece diameter: 500 mm Distance from workpiece spindle flange to steady rest seat: 280 – 650 mm Grinding diameter inner grinding: 40 – 400 mm Grinding diameter external grinding: 400 mm Rapid traverse: 10m/min. Grinding infeed: 0.1 – 8 m/min. Weight of the machine: 6.5 tons.
Key data: 350 mm, 1500 mm, 175 mm
1 Outside – Cylindrical Grinding Machine Make: Fortuna Model: F 13 S Year of Make: 1980 Grinding length: 1500 mm Tip height: 175 mm Grinding diameter: 350 mm Grinding wheel diameter: 500 mm Equipment / Accessories: Lynettes Various grinding wheels Coolant Setup Paper Belt Filter
1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.
1 CNC cylindrical grinding machine Make: Buderus Model: CNC-335-I-A Year of Make: 2001 CNC control: Siemens 840C Bore machining range: 150 mm Maximum workpiece depth: 100 mm Largest external processing area: 150 mm Largest swing diameter over table: 310 mm Workpiece spindle speeds: 0 – 3000 rpm. X-axis table lifts: 1050 mm Z-axis: 300 mm Infinitely adjustable feed speed: 0.01 - 10 mm/min Stroke-dependent: 0.0005 - 0.1 mm Workpiece spindle positioning: C-axis Machine weight approx.: 7.5 to.
Used spices in glass jars with grinder production line. Cartoning Machine The UNILINE AU-10-TA-R TF600x400x1500 automatic packaging line consists of: 1.TA-R grouper. 2.TF600x400x1500 tunnel. 3.UNILINE packaging line. Control cabinet containing the control equipment. This machine was designed and built for the production of bulk packaging of a given product. Packaged product types: •Grinder on a 2x3 foil tray with rim. •Grinder on a 2x2 foil tray with rim. •Grinder in 2x3 foil. •Grinder in 2x2 foil. •Grinder in 2x3 foil. •Grill tube in 2x3 foil. Grill tube in 2x2 foil. Sealer The machine consist of: •Feeder •Sleeve applicator head •Guide rollers •Sleeve ejection assembly •Format change kit •Infeed screw mechanism •Feeder assembly •Sleeveless package ejector assembly •Applicator pin assembly Optic check The s ...
ELB PERFEKT BD10 SPS surface grinding machine was built in 2004 in Germany by ELB-Schliff Werkzeugmaschinen GmbH. The machine is used for precision grinding of workpieces with a maximum weight of 1000 kg. The machining process is carried out fully automatically on a large magnetic plate or directly on the work table. The grinding head, consisting of a spindle and grinding wheel, moves along guide rails to ensure an even and accurate surface finish. The ELB SCHLIFF PERFEKT BD10 SPS magnetic surface grinding machine is also equipped with, among others, a cooling system with a belt paper filter, which cleans the coolant after machining and allows it to be reused in the next process. The total weight of the machine is 6300 kg. Technical specifications of the ELB PERFEKT BD10 SPS grinding machine - magnetic plate dimensions (L x W): 1000 x 750 mm - maximum grinding dimensions (L x W x H) ...
Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives
Air dryer with vacuum conveyor, mounted on the injection unit or free-standing Drying of the plastic with hot air Hermetically insulated silo Capacity: 15l
Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -
We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
