tri gr used for sale

grinding range: 3 -28 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad clamping range: 3 - 28mm mm 0: 5200 U/min connected load: 230 / 250 Volt / Watt wheel diameter: 100 x 50 x 20 mm weight of the machine ca.: 45 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16 - 5/16 - 3/8 - 1/2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatic cutting and surface grinding of hard metal and HSS rods with high precision for standard and special solutions Accessories: Total enclosure,, Automatic feed (hydro-pneumatic),, Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703,, Length positioning freely programmable,, Control system Siemens Simatic HMI,, Preparation for connection to central coolant system., Workpiece diameter with loading magazine: 3 - 20 mm, Workpiece length without loading magazine: 3-32mm, Workpiece length with loading magazine: 3-310mm, Workpiece length without loading magazines: 1-450mm, Spindle speed grinding spindle: 2000 rpm,, mass: approx. 1,700 kg, weight: approx. 1,700 kg, Dimensions L x W x H: 1900 x 1200 x 2400 mm, colour: Gray

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-310 mm, Workpiece diameter with loading magazine: from 3 - 20 mm

Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A., workpiece diameter automatic mode: 3 - 20 mm, workpiece diameter semi-automatically: 3-32mm, workpiece length semi-automatic: 3-32mm, workpiece length: 30-150 mm, Drive power grinding spindle: 4.0 kW, Spindle speed grinding spindle: 2000 rpm,, speed of the cylindrical grinder: 1500 rpm., cutting wheel diameter: Max. 200 mm, Electrical connection: approx. 7 kW (400 V / 50 Hz), Dimensions L x W x H: 2000 x 1500 x 1500 mm, mass: approx. 1,600 kg, colour: gray RAL 7035, Dimensio ...

Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available.

grinding wheel diameter: ? mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: ? t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

A Somos conveying device for pneumatic conveying of free-flowing granulates and regrinds is available. Useful volume: 90l, product nozzle diameter: 84mm, clean air nozzle diameter: 84mm, max. operating temperature: 150°C. Documentation available. On-site inspection is possible.

internal diameter: 2 - 40 mm grinding depth: 70 mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grooving machine Foellmer 45ME Year of construction 1998 Art.Nr. L1008

table-size: Breite: 800 mm table-size: Tiefe: 350 mm workpiece height: mm Dimensions (L/W/H): 4600 x 3200 x 2500 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system

Digital Grinding diameter 250 mm Grinding length 650 mm Accessories

Granulating sieve Manufacturer: Frewitt Type: MGI - 205 Capacity: up to 1,000 kg/h (depending on the product) Motor power 0.75 kW-1.0 kW Bearings dust-tight inside and out, rotor speed infinitely adjustable The machine is suitable for dry granulation, screening, crushing, grinding, wet granulation. Rotor speed infinitely adjustable, easy cleaning Seven sieve inserts available (table is not included), documents available

Surface Grinding Machine Manufacturer: Jung Type: JA 500 CNC-C Year of Make: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

AEG Double Bench Grinder 400 V.

Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light, saw diameter: 80-840 mm, Bore diameter: from 10 mm, sheet thickness: < 8 mm, Tooth pitch: 6 - 120 mm, Cutting length:

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 20 ...

VIET CHALLENGE 211B 1100mm calibrating machine with 2 belts: – 1st calibrating roller belt – 2nd sanding roller belt – pneumatic on/off of the rollers, from the control panel – cleaning blowers on both belts – 2620x1130mm abrasive belt development – belts with single motor 11 kW / 15 HP – rubberized pressure rollers – automatic table positioner, with digital reader – Advancement mat in good condition – variable belt feed speed – front and rear support roller conveyors Machine according to CE regulations

Samco Unilev Edge Grinding Brand: SAMCO Type Unilev M-No.: 1887 Year of manufacture 1989 Data: Length of work tables 1440mm Width of work tables 710mm Tilt adjustment 0-30° Sanding belt: 2170150mm Main drive: 3 KW Oscillatation sanding belt 0 - 25 mm Weight: 400 KG Press 6 bar

Hello sell grow boxes from the company Infarm The boxes are new in original packaging Mass High 2.00 m Width 2.00 m Depth 0.90 m Please visit first If you have any questions, write an e-mail approx. 44 pieces available

gebr. Radius and bevel grinding machine FISCHER (BARTH) RFM 320 YOC 2007 Oscillation Tischgr. 1,275 x 300 mm 8 radii adjustable: (R2, 3, 4, 5, 6, 8, 10, 12.5) Bevel grinding device up to 16 mm wide Extraction connection: 60 mm Bracket for feeder Socket for feeder pneumatic belt cleaning Chassis Dimensions 130 x 70 cm Weight: 159 kg approx. 30 sandpaper incl. very good used condition Manufacturer

Grinding area: 800 x 500 mm Travel X/Y: 1200 x 450 mm Max. workpiece height: 400 mm Grinding wheel dimensions: 400 x 50 x 127 mm Grinding spindle speed: 3600 min-1

Manufacturer: Cleveland Model: GAPU-5 A/M Diamond Discs: - Maximum Diameter: 200 mm - Minimum Diameter: 180 mm - Maximum Width (with double disc): 100 mm Note: The supplied grinding wheel guard is designed for a maximum diameter of 200 mm and a minimum diameter of 180 mm. Workpiece Spindle: - Speed Range: 400 – 4500 rpm Planing Unit: - Swivel Range: 190° - Oscillation Stroke: 70 mm - Oscillation Speed: Infinitely adjustable - Spindle Speed: 1400 or 2800 rpm Planing Grinding Disc: - Diameter: 200 mm - Width: 20 mm - Bore Diameter: 32 mm Machine Dimensions: - Length: 1250 mm - Width: 1000 mm - Height: 1100 mm - Weight: 450 kg Noise Emission: - Standard Operating Sound Level: 83 dB(A) - May be lower in individual cases Find more here - / Contact us at -

A Junker CNC cylindrical grinding machine overhauled in 2019 is available. Grinding length: 150mm, center height: 100mm, max. workpiece weight: 5kg, max. grinding diameter: 500mm, orbital diameter: 80mm, grinding wheel diameter: 400mm. Machine dimensions X/Y/Z: approx. 2850mm/1450mm/2000mm, weight: approx. 2000kg, control: Siemens Sinumerik. Including BKW chiller, Knoll VL 1000/4000 cooling lubricant system with 6500l container and Hyfra industrial recooler. Documentation available. On-site inspection is possible.

Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / Year of construction 1972 Groove comb with two thicknesses Perforating comb Functioning Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / year of construction 1972 Grooving tool with two thicknesses Perforating tool Working condition

1 used ELB SURFACE GRINDER Model: SWBE 010 NPC-K Grinding area: 1000 X 550 X 400 mm Year of Make: 1988 Grinding wheel:  400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Electro-Permian Magnetic Clamping Plate 1000 X 400 mm (SAV) Magnetic adhesive force control Universal Paper Belt Filter Grinding wheel with holder

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Key data: 400 mm

CNC Universal Cylindrical Grinding Machine with Internal Grinding Device External and internal grinding AZ Model RUX 1800 Year of manufacture 2018 Siemens Sinumerik 840D controller Grinding diameter 400 mm Center width 1900 mm Workpiece weight without steady rest 650 kg Grinding wheel diameter 660 x width 100 x bore 305 mm Grinding wheel spindle speeds 300 - 1500 rpm. Manually rotatable grinding wheel head 0 - +20° Internal grinding spindle Grinding wheel size 115 x 49 x 55 mm X-axis 480 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. Z-axis 2740 mm Resolution 0.0001 mm Feeds 0.01 - 5,000 mm/min. HEADSTOCK Speeds 5-400 rpm. Bezel SMW AUTOBLOK Premium Line Coolant Setup Offer number V-7059

Stock number: F1097, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Filling machine, Conveyor: W 82 x L 3650 mm., Filling heads: 4 pcs. Ø 10 mm., Manufacturer: Hero de Groot NV

Stock number: R647, Portions machine, stainless steel,, Wolfking PD 100., For mounting, after meat grinder., Material: Stainless steel AISI 304

100 litre, Stock number: R278, Granulator/mixer, stainless steel,, Blendex 4., Open top, standing on console, tiltable., Ø 600 mm., Litre: 100, Material: Stainless steel AISI 304

Stock number: R397, Lab. pelletezer, stainless steel,, Axon type MG-lab., Excl. steering., Material: Stainless steel AISI 304

Stock number: R1144, Mixer, stainless steel,, KS universal type 22B., Combined mixer, pre-chop and emulsification machine,, with circulation., Standing on wheels,, 9/18,5 kW. motor., 380 Volt., Litre: 350, Material: Stainless steel AISI 304

Stock number: R048, Crusher, stainless steel,, standing on leg frame., Gear motor with chain drive., Inlet funnel., Crushing house L 480 x W 390 mm., Material: Stainless steel AISI 304

Stock number: R188, Agitator, stainless steel,, Greaves mixer type VRB2., 1,5 kW motor with variable speed 0 - 900 rpm., Air driven elevation function., Material: Stainless steel AISI 304, Propeller size: D 600 mm.

Stock number: P320, Feed pump,, Grundfoss type DME 12-6AP-PP., Max 12 l/h.

Stock number: P319, Feed pump,, Grundfoss type DDA 7,5-16 FCM., Max 7,5 l/h.

Stock number: P269, Dose pump, PVC/stainless steel,, Grundfos Alldos type DMH 24-10,, B-PVC/V/G-X-44B1E1., Ex motor 0,18 kW, 1330 rpm., 220/380 V., Capacitet max 24 l/h. (Variabel), Pressure max 10 bar., Material: PVC/Stainless steel AISI 304

Stock number: PT2030, Lobe pump head, stainless steel,, Willi F. Grassel type 200 NDA,, double jacket Pump house., Horizontal flow., Material: Stainless steel AISI 304

Stock number: R517, Cubic cutter, stainless steel,, Treif type TA 108/4., E.g. for cutting up potatoes., 110 x 110 x 450 mm chamber., Various tools., Material: Stainless steel AISI 304

Stock number: R060, Square cutter, Treif., Variable square length., 2-chamber type., 1 hydraulic piston.

1.200 litre, Stock number: T3588, Litre: 1.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Closed, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, 500 x 380 mm., Turbolence plate: 1 stk., Agitator: 2 pcs., Agitator type: Anchor agitator, screw agitator, Motor: 3,5 kW - 220/380 Volt - 1-20 o/min., 2,5 kW - 220/380 Volt - 58-290 o/min., CIP: 2 stk., Working temperature: 20° C, Working temperature double jacket: 100° C, Working pressure: 1 Bar, Inner diameter: Ø 1240 mm., Outer diameter: D 1440 mm., Total height: 2600 mm., Manufacturer: Grenaa Rustfrit Staal aps, Year: 1986

Universal cylindrical grinding machne TACCHELLA ELEKTRA-Evo 1018 MPC - FANUC 21i MPC, Information about technical data are not binding., Machine available subject to prior sale., Height centres: 180 mm, Distance between centres: 1000 mm, Wheel dimension: 508x80x203,2 mm, Wheel speed: 2000 rpm - Variable and programmable, Spindle motor power: 8,2 Kw, Internal grinding spindle speed: 30.000 rpm, Weight: 6.500Kg

Grinding wheel dimensions (h x w x d x w): Ø 508 x Ø 305 x width 655 mm, Ø min/max to be ground: 5/240 mm, Min/max speed of regulating wheel (rpm): 0/115 rpm, Type of control (cnc/manual): manual, In feed Grinding (auto/manual): manual, Dimensions of the regulating grinding wheel (h x w x d x w): Ø 330 x Ø 203 x width 655 mm, Maximum length to grind in feed grinding: 655 mm, Grinding wheel head motor power: 45 hp, Total power: 60 HP, Length 3.000 mm, Width 1.400 mm, Height 1.600 mm, Weight 11.500 Kg

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Dressing (auto / manual): Longitudinal auto, manual penetration of both grinding wheels, Cnc axes nº: 1, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 55 Kw, Power hydraulic motor: 3 Kw, Total power: 60 Kw, Voltage: 220 / 380V, Long: 2.300 mm, Width: 2.800 mm, Accessories included: Grinding wheel balancer, plongeé rule holders / Grinding wheel balancer, plongeé rule holders., High: 2.100 mm, Weight: 15.000 Kg

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 325x175x125mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

Ø max working wheel: 508, Ø min. working wheel: 380, Ø inside working wheel: 254 (305), Working wheel width: 205, Ø max. drive grinding wheel: 305, Ø min. drive grinding wheel: 230, Ø inside grinding wheel: 152.4, width of feed wheel: 205, Cutting speed: 30-45-60 m/s, R.p.m. of the driving wheel: 0-300, Diamond speed: 300, working wheel motor: 15 Kw (18Kw), Driving wheel motor: 10.4 Nm, Dimensions WxLxDxH: 2250x3380x2385, Weight: 9000Kg, CNC Brand: SIEMENS, CNC Model: 840 D, Number of CNC axes: 11