tri gr used for sale

Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grates available -Weight: 6kg

Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 795 x 230 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 30/10 mm -Gratings: hot-dip galvanized -Number: 1x grids available -Weight: 4,8 kg

Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm -Weight: 200 kg

standing GRP tank, polyester tank, with feet Volume: 35 m³ Dimensions: Ø 3.00 m x 5 m high

upright GRP tank, polyester tank, with bottle bottom, with two domes (on top of the tank and on the side of the spout) Volume: 40 m³ Dimensions: Ø 2.90 m x 6 m high

GRP tank standing on the skirt, polyester tank, reinforced, with inner coating with cone at the bottom, possible density: 1.3 kg /l Volume: 30 m³ Dimensions: Ø 2.85 m x 8 m high incl. skirt cylindrical length: 4.70 m

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 17 mm -Mounting: Taper bushing Ø 40 x 30 mm (can be changed) -Dimensions: Ø 187 x 44 mm -Weight: 5.7 kg

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 22 mm -Hole: Ø 42 x 112 mm -Dimensions: Ø 180 x 130 mm -Weight: 8.3 kg

Weight: 0.1 tons Power: 0.6 Kw Waterpressure: 3 Bar Length mm: 1600 Width mm: 900 Height mm: 1300 Working height: 90 cm Transport size L x W x H: 2,5 x 1,36 x 1,3 Min.-max glass size: 1,20 x 55 cm Number of spindles: 1 Condition machine : Good Control type: Manual Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No Parts list: N/a Available software: N/a Photos/film available: Photos and video available

Surface grinder BPH 320A/1000

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 450 x 6 TB 4040 -V-belt width: 17 mm -Mounting: Taper bushing Ø 80 mm (can be changed) -Dimensions: Ø 455 x 120 mm -Weight: 42 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 6-groove pulley type SPB 315 x 6 -V-belt width: 17 mm -Mounting: Taper bushing Ø 75 mm (can be changed) -Dimensions: Ø 320 x 120 mm -Weight: 28 kg

Centerless cylindrical grinding machine KÖNIG & Bauer M130 MULTIMAT 130 Condition: very good, used Specifications Grinding wheel rotation speeds 35/45 (60) m/sec. Largest grinding diameter 35 mm Smallest grinding diameter 0.8 mm Maximum workpiece length for continuous grinding approx. 200 mm Maximum workpiece length for plunge grinding 130 mm The machine can be viewed by arrangement in our factory in Krefeld. – Errors, modifications and prior sale excepted –

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 3-groove pulley type SPA 355x3 -V-belt width: 13 mm -Mounting: Taper bushing Ø 48 mm (can be changed) -Dimensions: Ø 360 x 50 mm -Weight: 14 kg

PPSM Habrama 2200 Precision Profile Grinding Machine Rack and Pinion Grinding Machine Manufacturer [manufacturer]: Habrama Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Construction year: 10/2009 Travel paths: X-axis (longitudinal): 2200(2500)mm Y-axis (transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W axis: 125mm B2 axis: +20°/-20° Workbench: 390 x 3.750mm Max. table load: 4000kg Feed speed X-axis [feed speed]: 21m/min Feed speed Y-axis [feed speed]: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding ...

ELB Perfect BD 10 750, grinding area 1000 x 750 mm, year of construction 2004, grinding spindle 10 KW, grinding wheel 400 x 100 mm, automatic dresser with compensation, electric perm magnetic clamping plate 1000 x 750 mm, partial enclosure with suction, water tank with paper belt filter, the machine is partially overhauled, geometry according to the standard of new machine, we are happy to take over the installation / training on site, as well as the subsequent service.

V-belt pulley, belt pulley -V-belt pulley: 4-groove pulley -V-belt width: 13 mm -Hole: cone Ø 101 - 107 mm -Dimensions: Ø 320 x 65 mm -Weight: 15.7 kg

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 8-groove pulley type SPB 224x8 TB 3535 -V-belt width: 17 mm -Mounting: Taper bushing Ø 60 x 90 mm (can be changed) -Dimensions: Ø 230 x 160 mm -Weight: 25 kg

Precision surface grinding machine, COSMOS 7040 SPS, grinding area 700 x 400, grinding wheel 300 x 50 mm, magnetic clamping plate 700 x 400 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take care of the installation and training on site, as well as the subsequent service.

V-belt pulley, pulley with taper bushing, taper clamping bushing, taperlock clamping bushing -V-belt pulley: 4-groove pulley type SPB 250 4 Bush 3020 -V-belt width: 17 mm -Holder: cone Ø 101 - 107 mm for taper bushing 3020 -Dimensions: Ø 260 x 80 mm -Weight: 12.4 kg

COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 4-groove pulley type SPA 300 4 3020 -V-belt width: 13 mm -Hole: Ø 55 x 50 mm taper bushing 3020 (can be replaced) -Dimensions: Ø 300 x 65 mm -Weight: 14.1 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Holder: Ø75 x 90 mm taper clamping bush 90 x 90 NE (Ø can be changed) -Dimensions: Ø320 x 100 mm -Weight: 32 kg

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

gr. grinding length: 300 mm large grinding width: 150 mm Table movement - longitudinal movement: 2 - 20 m/min Grinding wheel speeds: 3000 rpm electr. Power supply: 380 V, 1.1 kW Dimensions: 1500 x 1100 x 1750 mm Weight: 920 kg

GRP tank, upright Volume: 23,000 l Dimensions: Ø 2.00 m × 7.50 m high Spout: DN80

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley -V-belt width: 17 mm -Hole: Ø38 x 96 mm -Dimensions: Ø150 x 180 mm -Weight: 6.5 kg

grinding drum, deflection drum, belt sander, belt grinder, drum sander -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 340 mm -Record: Ø 77 x 445 mm -Quantity: 5x drum available -Price: per piece -Dimensions: Ø 340 x 640 mm -Weight: 82.0 kg/piece

1000 pieces of insert grid 1315 x 1030 x 30mm Used goods, very good condition, see pictures. Bearing rod height 30 mm Load-bearing rod thickness 2 mm Mesh size 40 x 4 mm galvanized Negotiation price: € 39,-- net per piece Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

P404 - used approx. 50 m³ / 50,000 L polyester silo, GRP silo, with undercarriage. Technical details: Capacity: approx. 50 m³ / 50,000 litres Material: Polyester / GRP silo Manufacturer: Reich Tank Year of construction: 2.000 Specific gravity: min. 1.2 kg/L Test mark: Z-10.2-163, DIBT is supplied. Dimensions: approx. Ø 3.00 m × H total 12.00 m / frame approx. W 3.00 m × D 3.30 m × H 3.00 m Miscellaneous: Used polyester silo in good condition, former salt silo. Standing silo made of GRP, dome on top of the roof, several inlets and outlets. Incl. load-bearing steel construction / undercarriage. Cleaned inside and out, roof repainted. The silo is sold, as you can see in the pictures. Attachments such as pipes, fittings and accessories are not included in the purchase price. We leave the parts at the silo, but during transport and dismantling, something can break in the ...

Pelletizing plant for the production of granules, e.g. fertilizers, minerals, etc. Diameter of the plate 4000 mm, motor 37 kW, weight approx. 14 t

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

ID3280 Gravel washing plant / Kies-Waschanlage year/Year of construction 1987 Skid mobile, washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand screw and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 tons/h, Plant has been running until the end. Skid mobile washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand auger and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 to/h, system has been running until the end.

Inclined elevator SA 400 with RM 75 USED 10038241 / 147300000G M0009906E/07/00007 Subject to prior sale!

SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1987 and is in great condition. Brand: Colortronic Model: M400L Serial No.: 7491029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1987

Minakuchi NWT-300 CNC Cylindrical (ROLL) Grinder, I.D. Spindle, Fanuc O-GC, 30HP, New 1990 Machine Overall Capacity: 32" x 120" Swing: 32" Distance Between Centers: 120" Max. Swing over Table: 32" Max. Grinding Diameter: 30" Max. Work Piece Weight: 20000 LBS. Estimate at 32" x 120" Grinding Wheel: 24" x 1.968" x 10" Max. Grinding Wheel Width: 1.968" Spindle Speed: 1410/1530 RPM Spindle Wheel Motor: 30 HP Machine Weight: 30000 Lbs. Approximately Equipped with: Control: Fanuc Series O-GC (Parameters need to be reloaded) Fanuc Remote Hand Wheel Machine control functions: Coolant On/Off Switches, MODE: Off/Auto/Jog/Handle/Zero, Over Ride: 0-150%, Buttons: PRC, HIX, Spindle Inching, OTR on/off Switch, Cycle Start, Spindle Off, RT, Return, Feed Hold, Grind Off, ZRN, Emergency Stop Button Taper or Crowning Grinding Wheel Head Motor Work Head Work Rest Supports Extra Wh ...

This Colortronic is in machine storage at Plastima Used Machinery. The machine comes from 1991 and is in great condition. Brand: Colortronic Model: M400L Serial No: 74910029 feed opening: 400 x 160 mm Number of rotor knives: 8 blades Year of construction: 1991

Guideway Grinding Machine Waldrich Coburg -30-10 S 3640 Control: Siemens 840D Year of Make: 2012 Travel: X-axis 8,825 mm Y-axis 3,010 mm Z-axis 2,500 mm Table length 8,000 mm Table width 1,800 mm Table load: 18,000 kg Feed X-axis: 1 - 45,000 mm/min Feed Z-axis: 100 - 3,000 mm/min Universal Grinding Head S10 with 110 Degree Tilt / 2500 Rpm / 7.5 kW Vertical Grinding Head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D controller on the left and right of the machine Automatic doors (4x) for easy access to the machine / load / clamping Hydraulic table drive with 18000 kg working load KNOLL HL650/4000 filtration system new 2023 Various grinding wheels Large Package Spare Parts/Ball Screws/Covers Renovation in 2012 for 1.5 million EUR

Weight: 6300 Kg, cnc brand: FANUC, Accessories: Refrigeration equipment with paper filter

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley type SPB 190x5 -V-belt width: 17 mm -Receptacle: Cone Ø 100 - 107 mm for taper bushing TB 3020 -Quantity: 1x pulley available -Dimensions: Ø 198 x 105 mm -Weight: 9 kg.

V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley -V-belt width: 13 mm -Mounting: Taper bushing Ø 28 x 25 mm (can be changed) -Dimensions: Ø 118 x 35 mm -Weight: 1.7 kg

Key data: 1100 mm, 2

Wide belt grinding machine Manufacturer: Böttcher & Gessner Model: 780 Grinding width 1100mm Aggregates 1x calibration roller 1 x Finishing touches 1 x Cleaning Brush

V-belt pulley, belt pulley -Diameter: 630 mm -Belt: 1 -V-belt width: 25 mm -Hole: Ø 32 mm -Weight: 29.5 kg

Grinding machine (lower grinder) Heesemann type LSM 8 – U Specifications: • Cutting width (mm): 1300 • Workpiece thickness max. (mm): 3 -140 • Brushing device: brush roller diameter 150 mm • Drive for brushing device (kW): 1.5 • Transport bed: 3.0 kW FU 4.0 kW • Feed speed (m/min.): 5 - 25 • Workpiece conveyor belt suction clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total electricity connection (kW): approx. 73