tri gr used for sale

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 200 x 32 mm -Speed: 3000 rpm -Motor power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 570/300/H1150 mm -Weight: 118 kg

Double bench grinder, bench grinder, column grinder, column grinder, drill bench grinder -grinding wheel: max. Ø 180 x 20 mm -Speed: 2850 rpm -Motor power: 1.1 kW -Operating voltage: 380 volts -Dimensions: 500/560/H1220 mm -Weight: 110 kg

aba FF 625 Surface grinding machine ABA Precision Surface Grinding Machine FF600/25 Grinding length 600mm Scrap width 250mm Electric Magnet 600x250mm Workpiece height 400mm Diamond puller Height adjustment digital Motor 3,27 KW 400 V 50 HZ Coolant device Grinding wheels and flanges Weight: approx. 1350 kg G&-5020-M1768

Knife sharpening machine clamping length 820mm V 380 kW 0.75

Double bench grinder, bench grinder, column grinder, column grinder -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 805/550/H1070 mm -Weight: 236 kg

Double bench grinder, bench grinder, column grinder, column grinder -grinding wheels: max. Ø 200 x 25 mm -Operating voltage: 380 volts -Dimensions: 560/600/H1180 mm -Weight: 118 kg

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg

Manufacturer: ELB Type: SWN 6 VA2 Year of construction: 1982 Grinding length: 600 mm Grinding width: 320 mm Workpiece height: 525 mm Table clamping surface: 600x300 mm Magnetic plate: 600x300 mm Machine dimensions: 2600x1500x2000 mm Machine weight: ca. 2t

V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg

We have about 50 different guide rails, different length/width and height for sale. The guide rails are HSS and HSS with HM. Partly new or used . Please contact us so that we can make you an offer.

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

We clear our grinding wheels warehouse, there are new wheels unused, undamaged. They are exclusively ceramic-bonded discs. Diameter from 200 mm - 500 mm Width from 10 mm - 40 mm Different bonds and hardness. Please contact us so that we can make you an offer. The discs are sold at reasonable prices.

Grinding wheel puller, cup wheel puller, double bench grinder puller, flat grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines -Support: 150 mm -Number: 1x disc puller available -Price: per piece -Dimensions: 192/94/H128 mm -Weight: 5.3 kg

Polishing bench, grinding machine, polishing bench, double grinding bench, double grinding machine, pedestal grinding machine, pedestal grinding bench -Drive: 2.2 kW -Speed: 1420 rpm -Assembled brush: 150 mm -Dimensions: 700/800/H1300 mm -Weight: 73 kg

Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

This dryer from Colortronic is in machine storage at Plastima Used Machinery. The dryer is from 1981 and is in used condition. – Brand : Colortronic – Model: CTT 122 – Construction year: 1991 – Working Hours: Unknown

Technical data of the hydraulic grille for 3-roller sheets Faccin HAV 3172 used: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50Hz Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 525 mm -Length: 585 mm -Plate thickness: 28 mm -Plate: is solid -Groove width: 20 mm -Grooves spacing: 127 mm -Thread: M12 -Weight: 63 kg

Surface Grinding HARIG Super 612 - No 2 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

Technical data of the used Fomp City 305 3-roller grille: Upper roller diameter: 720 mm Diameter of side rollers: 650 mm Power supply: 380V - 50 Hz Dimensions: 8600 x 3500 x 3700 (H) mm Weight: 90000 kg

Surface Grinding HARIG Super 612 - No 1 Travel X: 300 mm Travel Y: 170 mm Travel Z: 250 mm Grinding wheel: Ø 200 mm Spindle motor: 3600 RPM Manual movement X - Y - Z Manual magnetic tray 345 mm x 145 mm Auto lubrication axes X and Y Delivered with 2 new grinding wheels 1 vacuum cleaner Voltage: 380 V Width: 1400 mm Depth: 1500 mm Total height: 1900 mm Weight: approx 1 T

- E L B - HIGH-PRECISION ROTARY TABLE SURFACE GRINDING MACHINE TYPE: ROTARY 80 SPS-NK / YEAR OF CONSTRUCTION 2002 = GRINDING DIAMETER : 800 mm GRINDING HEIGHT : 400 mm (from work table) TABLE LOAD : 300 kg Machine dimensions : 2800 X 2800 X 2660 mm ( WxDxH) Machine weight : 5,500 kg Motor version : DS flange motor Grinding spindle drive : 10 kW Grinding spindle speed : adjustable via frequency controller Grinding spindle cone : 60 mm Grinding wheel : 400x100x127 mm Control voltage : 24V DC Installed power : 20KW Fuse : 50A FULL ROOM COVERAGE

Specifications: - Polishing wheels - grinding wheel dimensions approx. 300 x 40 x 76 mm - Sanding belt dimensions approx. 3500 x 50 mm - Contact wheel dimensions 400 x 50 mm - Drive speed 1450 rpm - Drive 400 V / 1.8 kW - Space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Inner diameter: 150 mm Grinding depth: 200 mm Table lift: 425 mm large oscillating circuit diameter: 250 / 420 mm Bore: 80 mm Table speed -infinitely-0.5 - 10 m/min Workpiece speeds: 125/176/246/350 rpm Spindle speed: 17000 rpm Total power requirement: 2.2 / 0.5 / 0.9 kW Machine weight ca. 2 t Space requirement approx. 2.40 x 1.20 x 1.45 m Control: conventional

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.75 kW -Speed: 3000 rpm -Max. grinding wheels: Ø 200 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/280/H1230 mm -Weight: 116 kg

Shaft grinding machine with belt grinding attachment Specifications: - Flexible shaft 1500 mm - 5 speeds - Belt grinding attachment - Drive 380 V - mobile underframe - Space requirement approx. W 600 x H 1400 x D 600 mm - Weight approx. 80 kg

grass catcher, collection container, mower deck, lawnmower, cutter bar, disc mower -without a fan -for side ejection -Dimensions: 1500/800/H1400 mm -Weight: 100 kg

Specifications: - Flexible shaft 1500 mm - infinitely variable speeds 1000 to 12000 rpm - Drive 380 V - mobile underframe - Space requirement approx. W 750 x H 1400 x D 500 mm - Weight approx. 50 kg

T-slot plate, clamping plate with dovetail grooves, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Dimensions: 455/365/H40 mm mm -Bore: Ø mm -Dovetail groove: 17 mm -Weight: 45 kg

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 300 mm -Opening width: 1640 mm -complete with: rotary servo -Mounting bolt: Ø 60 mm -Intermediate dimension: 270 mm -Dimensions: 1640/540/H2100 mm -Weight: 690 kg

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

Grinding wheel pullers, cup wheel pullers, double bench grinder pullers, surface grinder pullers, cylindrical grinder pullers, dressing heads, dressing heads for grinding machines -Coverage: 255 mm -Quantity: 1x disc puller included Price: per piece -Dimensions: 510/165/H290 mm -Weight: 34 kg

Long belt sanding machine, veneer sanding machine, Specifications: Table width 2800 mm Grinding width 2500 mm Table depth approx. 2000 mm Sanding belt length 9500 mm Pressure lamellar belt length 10 mm x 7750 mm Sanding belt dimensions 150 mm x 9500 mm Belt speed 25 + 12.5 m/s Suitable for intermediate paint sanding Workpiece height 6 - 220 mm Grinding engine power 24 kW Total power 27 kW Machine dimensions approx. L 5000 x W 2300 x H 2400 mm Space requirement of the machine in width is 3500 mm Machine weight 2600 kg TOP condition, technical documentation, sanding belt.

Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

V-belt pulley, pulley -for compressor with blades -Diameter: 620mm -Strap: 2 -V-belt width: 13 mm -Receptacle cone: 17/25 mm long -Weight: 18kg -only one piece available

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (by Glasmek AB Sweden, renovated in 2005) Manufacture: Ashton Industrial Sales LTD / UK Year of manufacture approx. 2000 Professional high-performance glass grinding machine 2x diamond bracelet transverse straps High-speed abrasives and diamond abrasives 400 V , 50 Hz Ball roller tables for easy movement of the glass panes. Table dimensions: L x W x H = 3.85m x 1.20m x 0.9m Weight 600 kg CE marked

Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg

SPECIFICATIONS: Max. machining width: 800mm Working height: 150mm Installed power Kw: 3.0 2 brushing units consisting of 4 counter-rotating brushes Ø250mm x 220 mm Transport carpet with speed control Controller

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982

Crane grab, hydraulic clamshell grab, hydraulic rotary grab, shell grab, hydraulic grab -Bucket width: 695 mm -Shovel length open: 1720 mm -Total height: 750 mm -Recording: 59 x 65 mm -Weight: 293 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Ø grinding wheel dimensions (od x id x width): Ø350 x Ø200 x 150 mm, Peripheral grinding wheel speed (m / s): 1,700 RPM, Regulating wheel width: 150 mm, Regulating wheel speed nº: 4, Min / max regulating wheel speed (r.p.m.): 21, 30, 42, 310, Regulating wheel dimensions (od x id x width): Ø250 x Ø140 x 150 mm, Grinding wheel width: 150 mm, Maximum infeed grinding length: 150 mm, Motor power grinding wheelhead: 15 Cv, Total power: 16.5 Cv, Long: 1.654 mm, Width: 1.500 mm, High: 1.535 mm, Weight: 1.900 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Number: 9x discs available -Price: per piece -Weight: 0.4 kg