tri gr used for sale

We offer for sale a copper cable crushing and separation line consisting of the following components: 1. VOTECS Machine - Model: EZ 611 - Manufacturer: Votecs - Rated Voltage (Nennsp): 400 V - Control Voltage (Steuersp): 230 V - Hydraulic Pressure: 160 bar - Year of Manufacture: 09/2007 - Rated Current: 38 A - Fuse: 50 A - Frequency: 50 Hz 2. SIDMA Overband - Type: Magnetic - Model: OVB 5620 - Manufacturer: SIDMA - Weight: 680 kg - Consumption: 1500 W - Residual Induction: 400 Gauss - Width (A): 200 mm - Conveyor Belt Speed: 1.5 m/s - Year of Manufacture: 2016 3. MITECO - Manufacturer: Miteco - Rated Voltage: 400 V - Full Load Current: 127 A - Frequency: 50/60 Hz - Phases: 3 + PE - Short Circuit Rating: 35 kA - Enclosure Type: IP54 - Year of Construction: 2015 - Normative References: IEC 60439-1, EN 60204-1 Find more here - / Contact us at -

5-axis portal machining center Type: VU 2313 Manufacturer: Trimill Year: 2010 Control: Heidenhain iTNC 530 X: 2300 mm Y: 1300 mm Z: 1000 mm Machine in good condition, under power. Find more here - / Contact us at -

CNC vertical machining center Type: VC 1110 Manufacturer: Trimill Year: 2005 Control: Heidenhain iTNC 530 HSCI X: 1100 mm Y: 1000 mm Z: 550 mm Table: 1300 x 1370 mm Max table load: 8000 kg Chip conveyor Machine weight: 16000 kg In good condition, under power Find more here - / Contact us at -

: 0400 mm : 246 mm : 1250 mm : 195 mm : 54 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range: 1.000 mm error limit 20°C +/- 1°C: 3 + L(mm) / 300 µm repeatability: 2sec: 2 µm Resolution: 0,01 / 0,001 mm adjustment speed: max. man. 1 m/s Power: 0,7 - 1,6 N temperature: +10 .. +40 °C total power requirement: 15 W weight of the machine ca.: 15,0 kg dimensions of the machine ca.: 0,4 x 0,4 x 1,30 m Documents: Transmission: RS 232 Height Measuring Device TRIMOS - V 1002+ - Application area: 1.235mm - Max. angularity deviation: 12µm - Autonomy with air cushion: 30h - Autonomy without air cushion: 100h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gebr. Steel Bracket Insert Fabr. Tripan, Type 431 Kj Uregwt Ucehyxkonb Please request the respective quantity individually.

WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

Manufacturer: Triventec Type: Dry ice blasting machine (exact type not known) Number of units available: 2 pieces Condition: used Use: Cleaning and surface treatment by dry ice blasting Location: Bremen

Trimos TVM 602

Trimos V 604 +

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

General SKU212T513 LocationBarneveld MakeBuss Mach.No.60429-1 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure vapour evaporator9 Bar Main Features Surface5.7 m2 Specified Features - Falling film evaporator Condenser:trickling film cooler MakeBuss SMS Mach.No.60429-1 Year of construction1994 Heating surface5,7 m² Tube capacity400 Ltr. Number of tubes:61 Tube diameter25 mm Tube length1250 mm Shell capacity65 Ltr. Max. temperature-10/200 °C MaterialStainless steel 1.4571 (316Ti) Information Year of construction1994 Extra Specificationswith vessel: ø600x1000 mm, 280 ltr., outlet: DN80Falling film evaporatorsBuss-SMSColumns > Falling film evaporatorsBrand > Buss-SMS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ...

General SKU212W134 LocationBarneveld MakeTricom Frimafa SWM Typeschudbed VFB 10./3 No.00064-01 Year of construction2000 Main Features MaterialStainless steel Motor22 KW Surface9.36 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface9,36 m² Bed sizes7800x1200 mm Product inletDia. 1000 mm and 600 mm Product outletDia. 600 mm (3x) Number of sections:1 Air inletcheck Air outletcheck Vibro motor2x Motorcheck With fan3x A&N, type CHAE 4-170 and CMBF 400 Motor15+22+22 kW, 400/690 volt With dust filtercheck MaterialStainless steel 1.4301 (304) Information Total height2,60 m Weight6170 kg Floorspace8,50x1,80 m Extra SpecificationsWith filter installation, 3x fan, total dimensions 6200x2300 mm, height 2820 mm, with inlet and outlet.The filter unit is equipped with 2 heat exchangers.Fluid bed dryers continuousTricom FrimafraDryer ...

General SKU379W1588 LocationBarneveld MakeTrivac TypeD65B Mach.No.11296 20200007866 Main Features MaterialStainless steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialStainless steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 230/400 volt, 1390/1695 rpm Information Year of construction2005 Total height0,40 m CEcheck Floorspace0,80x0,40 m Weight90 kgVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A travel -x axis: 180 mm travel -y axis: +/-45 mm - - - - - Main spindle - - - - -: - - - - - - turning speeds: 0 - 5.000 U/min bar capacity: 65 mm --- Subspindle ---: - - - - - - turning speeds: 0 - 7.000 U/min bar capacity: 42 mm --- upper turret 1 ---: - - - - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X1 / Y1 / Z1 St. Tools speed: 8.000 U/min --- upper turret 2 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Tools speed: 8.000 U/min Number of axles: X3 /Y3 / Z3 St. --- lower turret 3 ---: - - - numbers of positions in the tool changer: 12 tool taper: BMT 45 Number of axles: X2 / Z2 St. Tools speed: 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axi ...

Krones Triblock (rinser, filler and capper) / 20,000 bph / 1.5l The Krones Triblock from 2005 is a high-performance filling line with an output of up to 20,000 bottles per hour in 1.5-litre containers. The machine is designed for the filling of still and carbonated beverages. It processes bottles with 28 mm closures and integrates the process steps of bottle handling, filling and capping in a compact machine design. The system stands for reliable technology and an efficient production process.

Control screening machine Tripette & Renaud model 21 M2 Conical strainer basket 300-360/ 800 Power 3 kw V-belt drive Wire covering MW 1.2 Outlet funnel is included Good condition

Inv. Num. : 8874 Type: TRIATHLON 1487 V Producer: HOLZHER Created: 2003 Parameters: Binding height: 55 mm Machine dimensions: 7500 x 1300 x 1800 mm

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

Demonstration machine:Technical data:Grinding width 450 mmmax. Workpiece thickness 125 mmmin. Workpiece thickness 8 mmFeed infinitely variable 2-6 m/minGrinding roller diameter 82 mmSanding belt dimensions 457 x 1003 mmMotor output power 3 kW S6 (2.2kW S1 100% ED)Suction nozzle 100 mmDimensions L x W x H 1030 x 1000 x 1740 mmWeight 215 kg

This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine.

This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine.

General SKU408X1220 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW, 200/400 V 3~, 1450 rpm Hydraulic drivecheck MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371345 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Power supply model Trio PS/1AC/24DC/5, used but in very good condition.

General SKU408X1219 LocationBarneveld CEcheck MakeTrivac Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume65000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck Number of pumps:1 Capacity65 m³/h With motor2,2 kW (400 V, 1450 rpm) MakeOerlikon TypeAR 40-65 Mach.No.18922 Year of construction2016 InletDN40 KF OutletDN40 KF Information TypeD65B Mach.No.31001371346 Year of construction2016 Floorspace0,80x0,50 m Total height0,50 mVacuum pumpsTrivacPumps > Vacuum pumpsBrand > Trivac What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Used Used Filling Triblock Bertolaso 12.12.1: Year: 2006 Condition: Good Used Filling Triblock Bertolaso 12.12.1: Model: Minibloc 12/12/1 Year: 2006 Product: still wine Speed: 2500 BPH Direction of travel: clockwise Rinser 12 clamps Manual carousel height adjustment Fixed nozzle Number of treatments: 1 Type of treatment: water Filler 12 valves Filling type: light depression Valve type: mechanical Vacuum system and inert gas injection before filling Single-head corker Cork: Natural straight cork Head height adjustment: manual Vacuum before corking Gas injection before corking Supported sizes: ? Cork diameter: 22 ?26 mm ? Cork height: 35 ? 50 mm ? Bottle diameter: from 55 ? 120 mm ? Bottle height: from 180 ? 370 mm Machine layout: 1700 mm x 3400 mm Safety protections Code: QT 713 More details: https://bottlingscout.com

Used Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Condition: Good Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Speed: 1500 bph Monoblock composed of: Washing bottles Dryer bottles by air blade Capsuling machine with 2 rolling heads for polylaminate caspules. Labelling machine with 3 adhesive station to apply front, back and neck with step-by-step motors Regulation machine by PLC Bottles equipments for cylindrical bottles of 0.75 L Code: EA 87 More details: https://bottlingscout.com

GT-5409 Water Blade Grinder Mill - Brand: TRIA - Model 32-30/CN - With cutting chamber: 310 x 320 - Rotor: Open - Engine: 10 hp (7.5 KW) - With centrifuge PREALPINA brand - Made of stainless steel - 1200 x 0.3 - 4 HP (3 KW) motor - 1200 x 0.3 - Electrical panel - Platform

GT-5410 Water Blade Crusher Mill - Brand: TRIA - Model 32-30/CN - With cutting chamber: 310 x 320 - Rotor: Open - Engine: 10 hp (7.5 KW) - With centrifuge PREALPINA brand - Made of stainless steel - 1200 x 0.3 - 4 HP (3 KW) motor - 1200 x 0.3 - Electrical panel - Platform

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Digital Height Gauge Travel: 600 mm Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition

Edhard Pump Cover for 2-Hole FunnelProduct descriptionManufacturer: EdhardEasy disassembly and dishwasher safeFood-safe syntheticsCompatible for funnel F-5001 / F-5005Pump cover/disc with two stainless steel shafts and sealing ring inserted. Details see pictures

Edhard Funnel 17 Ltr. single outlet, 1-hole system NewManufacturer: EdhardVolume: Â Â 17 LtrDetails see pictures

Edhard Funnel 5.5 Ltr. single outlet, 1-hole SystemFunnel 5.5 Ltr. Â single output, made of transparent Lexan, 1-hole systemDetails see pictures

Hopper 5.5 liters / double for dosing machine Edhard Neuâ Product descriptionâœ" Manufacturer: Edhardâœ" Material: Lexan, BPA-freeâœ" Condition: Newâœ" Volume: 5.5 litersâœ" Version: double (for 2 nozzles)âœ" Color: transparentâœ" Funnel including pump unit for Edhard enginesDetails see pictures. We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at our other advertisements.

Edhard Funnel 17 Ltr. double OutletFunnel 17 Ltr. double OutputVolume: 17 LtrDetails see pictures

Size: 0x0 Equipments: Mechanical speed: 300 cycles/hour

Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

Witzig & Frank TriFlex 5XYear of manuf. : 2018 Control : Fanuc 30i-B ____________Description:In General:Year of construction:2018Control system:FanucProcessing stations:5 piecesLoading station:1 pieceTravelling range:X-axis:450 mmY-axis:500 mmZ-axis:450 mmRapid traverse X/Y/Z:50 m/minTurret:Number of stations:8Speed:13,300 rpmTorque:58 NmTool holder:HSK 63 CWorkpiece/device:Dimensions max.:350 x 350 x 350 mmMax. permissible mass:250 kgMedia supply line:6 piecesNC swivelling rotary table:A-axis:+/- 150°B-axis:360°Max. load:250 kgTable diameter:320 mmEquipment:Loading/unloading:Fanuc Robot M20i-AChip removal:2x chip conveyorsCoolant supply:IKZ system, 20 barPosition measuring systems:Direct in all axes

Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)

Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!

Working diameter: 40 - 250 mm Automatic work piece loading and removing for ball diameters: 40 - 105 mm Manual loading for diameters: 105 - 170 mm Direct ball attaching: 170 - 250 mm Rotation speed, stepless: 10 - 300 rpm Grinding spindle speed range: -160 - 3150 rpm -80 - 1580 rpm -38 - 775 rpm -20 - 385 rpm Weight: 6,5 tn Electrical connection: 17 kW Year of manufacturing: 1991

1. CUTTER HAED WITH KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 2. CUTTER HAED NO KNIVES FOR KRÄMER + GREBE - K+G WETTER SA 120 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36