tri gr used for sale

Shelves galvanized galvanized shelves ground floor shelves galvanized On offer we have new shelves. The details of the offered set: -Number of frames: 6 -Frame height: 2200 mm -Frame depth: 500 mm -Number of subjects: 25 -Tray width: 1000 mm -Specialist load capacity 120 kg -Length of the offered rack 5000 mm Additional information: A large number of the offered goods available - is now available from stock. Other configurations of racks possible. Price for offered shelf 350 On request, we can organize transportation. After entering your postcode we will charge you the delivery charge We offer a professional fitting. German contact: Liliana Howayek 0048601553406 Contact in English: Katarzyna Kujawa 0048606687144

Alpine dairymen curve machine, uses type SR28SL construction year 1994

Fabric grinding belts of M3 1260 mm x 13 mm P150 for metalworking

K+G Wetter Angle-Grinder E 130mm, 130mm, all stainless steel, 2 speeds, sorting device, in very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

Machine number: 3728-87 Grinding length 2000 mm (Roll grinding machine)

Input Board PC 1 NE 80 (Grundig 9.44904-1706 FD-Nr. 6006 04 100643) Exchange 520,-€ + Mwst Without Exchange 620,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

ASPIRATOR / CLEANING OF GRAIN / 120 T / H CONVECTION 9.2 KW SCREEN DRIVE 3 KW IMMEDIATELY AVAILABLE MOB: + 49 171 5213204

PSU Board NSV 56 (Grundig 44206-860.02) (Sparepart for NSV 52, NSV 54, NSV 55, NSV 56) inkl. 1 Year Warranty Exchangeprice 595,-€ with Exchange 695,-€ Dialog 1attached NSV 52 ( Grundig Nr. 9.44904-1703 FD-Nr. 6006 04 100657) Dialog 2 attached NSV 54 ( Grundig Nr. 9.44904-1203 FD-Nr. 6006 04 100678) Dialog 3 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Dialog 4 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Contour 1 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 2 attached NSV 55 ( Grundig Nr. 9.44904-1909 FD-Nr. 6006 04 100687) Contour 3 attached NSV 56 ( Grundig Nr. 44206-860.02 FD-Nr. 6006 04 100687 01) Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitor ...

Input and Output Board PC 1 NEA 80 (Grundig 9.44904-1707 FD-Nr. 6006 04 100642) Exchangeprice 520,-€ with Exchange 620,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Kellenberger: 1000 U 125 Machine was totally dismantled and rebuilt from the ground up. All sheet metal and aluminum parts are laminated. Work piece headstock newly stored. Completely overhauled hydraulic, All filter replaced.

PSU PC 2 NSV 90 (Grundig 9.44904-906 FD-Nr. 6006 04 100664) Exchangeprice 430,-€ with Exchange 530,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Kellenberger Univesalrundschleifmaschine 600 U 125. The machine is in a very good condition, used in addition to several CNC-universal cylindrical grinding machines only for making parts. The term is very low according to the age. Special accessories on request both new as well as offered in the used condition. Machine has a paper band filter. Internal grinding spindles, grinding wheel flanges, clamping device, grinding wheels, etc. on request. If necessary one can be mounted digital display two axes. Display accuracy: o, òó1 and 0.002 mm.

Roast knuckle or chicken grill BEEREX Type: HD 5 Power: 9 kW Power supply: 400 V / 50 Hz Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

PSU PC 1 NSV 80 (Grundig 9.44904-1705 FD-Nr. 6006 04 100640) Exchangeprice 500,-€ with Exchange 600,-€ Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

CPU PC 1 NPP 80 (Grundig 9.44904-1903 FD-Nr. 6006 04 100641) Exchange 710,-€ + Mwst without Exchange 810,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Input Board PC 2 NE 90 (Grundig 9.44904-1708 FD-Nr. 6006 04 100662) Exchange 400,-€ + Mwst without Exchange 500,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

Belt/ozilierend swiveling Roll in the table

Technical data: with stand, 50 Hz, DAB ED 25% Engine: 3 Capacity: 1.75 A Capacity: 736 W Voltage: 380 V

Input and Output Board PC 2 NEA 90 (Grundig 9.44904-1709 FD-Nr. 6006 04 100663) Exchange 480,-€ + Mwst without Exchange 580,-€ + Mwst Features of our PCB are - A new built up PCB with technology SMD (No PCB revised for many years) - Where it was possible electrolytic capacitors were substituted with ceramics - Components for repair the next decades available - Newer and more efficient components. -Doubling of the source capacity -Less warm development etc. Their advantages are -Cost reduction on a minimum -The newest technology in the usual control -Spare part availability the next decades guaranteed -No consequential costs by decades old repaired PCB

6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Overhauled Gripper Bar for Heidelberg KORD 64 3 Pcs

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Hopper loaders with separate blower switching box with timer control different capacities available

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

Accessories fur WU 3 ms, apparatus of part of, round loop facility, etc. More info on request

Seydelmann AU 200-B, 200 mm automatic grinder, all stainless steel, hopper capacity approx. 400 litres, 2 working worm speeds, 3 feeding worm Speeds, refurbished. The machine is immediately available, and can be tested in our facility in Koblenz, Germany.

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

Used line to grind, capacity 300-600kg / h. (depending on the product) The line is equipped with: - Mill REKORD - Cyclone Filter - Centrifugal fan for air transport.

; NEW

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Complete wheel sets for the production and subsequent sharpening of HSS and carbide tools. Single diamond and CBN discs. for the manufacturing and Resharpening. Grinding wheel shots short and long run. Spacer discs for grinding wheel flanges.

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price: â?¬13 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Cast T-slot plate 1500 x 950 mm

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Band dimensions: 150 x 2000 mm speed: 14.5 / 29 m / sec. Contact plate: 200 mm / 155 mm plan grinding table diameter: 460 x 150 mm Extractor connection: 100 mm in diameter engine power: 4 kW

Surface grinding machine

Tip height: Grinding diameter 250 mm centre distance: loop length 575 mm grinding wheel dimensions: 500 x 60 x 127 mm Electr. Supply: 380 V, approx. 9 kVA kW space: 2650 x 2600 x 2240 mm weight: 3400 kg

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.