129,016 used machines on RESALE, but how to find them? Machine Search
Year: 2007 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - angle-adjustable crank - pressure reducer
Dissolver Pendraulik Disperlux IP green 037 Power 0.37 kW Speed range 0-12000 1/min Very good ready-to-use condition, straight from production
This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine.
General SKU397X1175 LocationBarneveld CEcheck MakeFriedrich Gruber HmbH TypeAgitated Tank 630 L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume630 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity630 Ltr. Vessel sizesø 1000 x 1300 mm Dished bottomcheck Dished top sidecheck Top connectionscheck (DN50 - DN100) Outletcheck (DN125) With jacketcheck Max. temperature-30 / 200 °C With propellor stirrercheck Motor3 kW 230-400 V 1400 rpm (Ex) Speed mixing shaft455 rpm Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.3564 Year of construction2003 Mounted on legscheck Floorspace1,3 x 1,3 m Total height1,95 m Weight780 kg Technical specs Extra information-1 / 6 bar -30 / 200 °C 155 Ltr.Stainle ...
This GRIGGIO G 240P/5U was manufactured in 2007. It features a maximum planing width of 240mm and height of 160mm, accommodating workpiece sizes up to 240 x 160mm. Equipped with five spindles, including a universal turning shaft, and spindle speeds up to 6000 rpm. The machine allows smooth feed adjustments up to 30m/min. Weighs 4100kg with dimensions of 440x220x180cm. Contact us for more information about this machine.
General SKU400X1187 LocationBarneveld CEcheck MakeGross Type1550 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1550 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck (Bioreactor) Capacity1350 Ltr. (1550 Ltr.) Vessel sizesø 1200 x 1819 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (23,5 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Information No.7853 Year of construction2005 Mounted on legscheck and frame Floorspace1,60 ...
General SKU400X1186 LocationBarneveld CEcheck MakeGross Type1550 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1550 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4435 (316L) Stainless Steel Reactors Reactorcheck (Bioreactor) Capacity1350 Ltr. (1550 Ltr.) Vessel sizesø 1200 x 1819 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (23,5 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Information No.7852 Year of construction2005 Mounted on legscheck and frame Floorspace1,60 ...
General SKU400X1189 LocationBarneveld CEcheck MakeGross Type500 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume640 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck (Bioreactor) Capacity500 Ltr. (640 Ltr.) Vessel sizesø 1000 x 1140 mm Dished bottomcheck Dished top sidecheck Manholecheck DN400 Top connectionscheck OutletDN25 With jacketcheck (7,7 Ltr.) Half coil jacketedcheck Max. temperature—10 / 150 °C With propellor stirrercheck (magnetic drive) Motor0,75 kW (400 V, 2790 rpm, (Ex)) Speed mixing shaft377 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Information No.7855 Year of construction2005 Mounted on legscheck and wheels Floorspace1,40 x 1 ...
General SKU397X1177 LocationBarneveld MakeGruber Pressure Working pressure1 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume1602 Ltr. Specified Features - Pressure vessel Reactorcheck Capacity1602 l. Dished bottomcheck Top connectionscheck Outletcheck With jacketcheck volume Max. temperature90°C Pressure vessels MaterialStainless steel 1.4571 (316Ti) Information No.2547 Year of construction1992 Mounted on legscheckPressure vesselsGruberTanks > Pressure vesselsBrand > Gruber What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg
Offer 20148 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg
Key data: 5 KW, 2860 1/min
Used Grundfos MGE 132SB2-38FF265-B electric motor with frequency converter Power 5.5 KW Voltage 400V, frequency 50Hz., current 12.0A, IP55 Speed 700 to 2860 rpm. With remote control / remote R100. Without pump. Sale only to tradespeople.
Condition: used,Manufacturer: Gram Equipment,Remarks: Highly efficient plant for the production of popsicles / ice cream with a capacity of 7,200 pieces up to 42,000 pieces per hour. The currently installed mold size is 35ml popsicle products. Built in 2008. Complete line is for sale, including control, automatic stick inserter, wrapper and other components. The full documentation is available. The system was in use until September 2023 and was then professionally dismantled for quick recommissioning. Space required for installation: approx.
Qty. 1 Second-hand pallets rack storage system Mfc.: STAMH GROUP Type: 65 Lanes Built: TBA Dim. of pallets: 1.0 x 2.0 x 1.4 m – W x L x H Pallet Weight: 120-600 kg Gravity Roller Conveyor – Rack mounted lane for 3 PP Storage capacity: 195 pallets Total load capacity: 120 900 kg Requested space: 15.25 x 21.56 x 9.05 m – L x W x H Type of forklift truck to be used: Min. working main aisle: 4.4 m Min. reach height: 7.7 m
functionality: Heiz-/Kühlbar, Isolation, Overpressure,Manufacturer: GROSS Behälter- und Anlagenbau,condition: gebraucht,volume: 37.800,max. excess pressure: 2,0,max. allowable working temperature: 20,lower bottom: Konusboden,construction: hanging,stand type: Ring,Heizung/Kühl (Filterleiste): vorhanden,Volume double jacket: 260,0,max. allowable working overpressure (dj) : 1.0,insulation: vorhanden,total height: 7.500,total width: 2.900,manhole: im Oberboden, nameplate: Yes,remarks: Cooling area: 17 m² Cargo dimensions: 7.5 x 3.0 x 3.0 m ,latest application: Beer,floor bearing: No,stream interrupter:
Manufacturer: GROSS Behälter- und Anlagenbau,condition: used,volume: 70.800,bottom: Klöpperboden,construction: liegend,stand type: Sättel,total height: 3.000,total width: 3.000,total length: 10.500,nameplate: Yes,outlet: available,remarks: manhole approx. 350 x 450 mm in the front floor a container (9540-1) with a small bump under the bearing shell, a container (9540-2) without nameplate up to 4 identical additional tanks can be made available on request. The following saddle feet could be purchased separately for the container:
General SKU358U924 LocationBarneveld MakeGuedu S.A. Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Motor30 KW Surface4 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface4,0 m² Capacity6050 l Vessel sizesø 2280 x 1800 mm Plate sizesø 2280 mm Top connectionscheck Solids outletø 270 mm Liquid outletDN 80 With jacketcheck Max. temperature-20ºC/+170ºC With stirrercheck Motor30 kW(400V, 1400 rpm, Ex) Stirrer speed20 rpm Stirrer can be liftedcheck With hydraulic unitcheck Motor4 kW (400V, Ex) MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information TypeGRF 4000 Mach.No.960067 Year of construction1997 Mounted on legscheck Floorspace2,60 x 2,60 m Total height4,50 m Weight11000 kg ATEX compatiblecheckNutsche filtersGueduFilters > Nutsche ...
General SKU308T739 MakeAllgaier Werke LocationBarneveld CEcheck TypeWS-GT-0,75 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information No.280 Year of construction2004 With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...
Grafisk Maskinfabrik - Slitter Rewinder LS-350 Working width: 350 mm Connection voltage: 400V, working width: 350 mm, Supply voltage: 400V
General SKU237S136 MakeCollette (BE) TypeVactron GRAL 75 Mach.No.84 MG7527 Year of construction1997 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume50 Ltr. Motor10 KW Specified Features - Universal mixer Gral-granulatorVactron Capacity75ltr (nett 50 ltr.) Vessel sizesdia.525x400mm With covercheck Inletdia. 50mm (1x) with funnel, Dia. 35mm (1x) Pneumatic operated outletcheck Outletdia. 140mm With motor10 kW, 415 Volt With variable speed drive frequency control (variable) With lump breakercheck Rotor speed1500 & 3000 rpm MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgear(as is ) Floorspace1,8x1,0 M Total height2,0 M Weight1200 Kg Extra SpecificationsA mixer-granulator with microwave drying including: vacuum pump Busch type Huckepack 425013 2001 microwave generator thermal oil heater Conair Churchill t ...
General SKU294M411 MakeCollette Machine TypeGRAL 600 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Volume600 Ltr. Motor37 KW Specified Features - Universal mixer MaterialStainless steel Universal mixercheck Gral-granulatorcheck Capacity600 Ltr. Vessel sizesdia. 1080mm x 700mm Pneumatic operated outletcheck Outletdia. 250mm With motor37 KW, 380/660 Volt With lump breakercheck With motor7,5 / 5 KW, 380 Volt Information With switchgearcheck Total height3,0 M Weight4200 KGUniversal mixersColletteMixers > Universal mixersBrand > Collette What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU253S189 LocationBarneveld MakeGrundfos Pressure Working pressure16 Bar Main Features MaterialStainless steel Volume16000 Ltr. Motor7.5 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4401 (316) Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity16 M3/h With motor7.5 kW 380-415/660-690 Volt Inletdia. 50mm Outletdia. 50mm Information TypeCRN16-70 A-A-AUUE Mach.No.A6300007P1 9233 Year of constructionunknown Floorspace0,3x0,3 M Total height1,1 M Weight120 KgCentrifugal PumpsGrundfosPumps > Centrifugal PumpsBrand > Grundfos What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR1055 LocationBarneveld MakeCollette Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1200 Ltr. Motor55 KW Specified Features - Universal mixer Universal mixercheck Capacity1200 ltr. Vessel sizesDia: 1485x700mm With covercheck Manual operated outletcheck Outlet200mm With jacketcheck With motor55 kW 380/660 Volt MaterialStainless steel 1.4306 (304L) Information TypeGral-1200 Mach.No.91MG120014 Year of construction1991 Mounted on framecheck With switchgearcheck(as is) Floorspace3,6x1,9 M Total height3,1 M Weight6500 KgUniversal mixersColletteMixers > Universal mixersBrand > Collette What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please vis ...
General SKU253S190 LocationBarneveld MakeGrundfos Pressure Working pressure16 Bar Main Features MaterialStainless steel Volume16000 Ltr. Motor7.5 KW Specified Features - Centrifugal Pump MaterialStainless steel 1.4401 (316) Centrifugal Pumps Number of pumps:1 Capacity16 M3/h With motor7.5 kW 380-415 Volt Inletdia. 50mm Outletdia. 50mm Information TypeCRN 16-70 A-A-AUUE Mach.No.A630007P1 9233 Year of constructionUnknown Floorspace0,3x0,3 M Total height1,1 M Weight120 KgCentrifugal PumpsGrundfosPumps > Centrifugal PumpsBrand > Grundfos What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
GRACO pneumatic pump ATEX, Maxflow: 9.5 L/min / 2.5 GPM / 5:1 RATIO, Max flow: 9.5 L/min / 2.5 GPM / 5:1 RATIO , Max Air WPR: 1.2 MPa / 12 bar / 180 PSI , Max air WPR: 1.2 MPa / 12 bar / 180 PSI , Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI
Double-walled mobile tank with top agitation. 2 interchangeable agitators Sold with its lifting frame to change the agitator Model: LMX 500 Year: 2015 Max capacity: 500 Kg Agitation control via SIEMENS Panel 2 NEP balls, Volume: 573 Litres, Useful volume: 500 Litres , Elec: Sew-Eurodrive , Agitation type: from the top, Engine: Sew-Eurodrive , Cover diameter: 740 mm, Tank bottom outlet: Yes, Diameter outlet bottom of tank: 36 mm , Tank bottom outlet diameter: 36mm , Envelope simple temperature (°C): +20 / +80 °C , Single envelope temperature (°C): +20 / +80 °C , Mobile tank: Yes, Double envelope: Yes, Double envelope volume: 78 Litres , Double envelope pressure: 0/ +4.0 Bar , Double-walled temperature (°C): +15 / +90 , Output diameter bottom of the double envelope (mm): 36, Double envelope temperature (°C): +15 / +90 , Bottom outlet diameter of the double envelope (mm): 36, 1/min: 1 ...
GRACO pneumatic pump used in a pharmaceutical factory, LPM: 9.5, Max Air WPR: 1.2 MPa / 12 bar / 180 PSI, MOC: 2.5, Max fluid WPR: 6.2 MPa / 62 bar / 900 PSI , MPa: 1.2, Max Flow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO , bar: 12, PSI: 180, Max air WPR: 1.2 MPa / 12 bar / 180 PSI, MaxFlow: 9.5 L/MIN / 2.5 GPM / 5:1 RATIO
General SKU209N034 MakeGrieser und Faulhaber Maschinenbau- und Service GmbH TypePL 600 No.07002-01 Year of construction1984 LocationBarneveld Material Pan materialStainless steel Main Features MaterialStainless steel Volume600 Ltr. Motor25 KW Specified Features - Planetary mixer Planetary mixercheck 2 Mixing/kneading shaftscheck With scrapercheck Motor17 / 25 kW 380 Volt With covercheck With pan(3x) Capacity600 Pan sizesdia. 1050 x 700 mm Outletdia. 75 mm With jacketcheck With hydraulic liftingcheck Motor2,2 kW 380 Volt MaterialStainless steel Information With switchgearcheck Floor space3,7 x 1,40 m Total height2,2 m Weight4200 kgPlanetary mixersGrieserMixers > Planetary mixersBrand > Grieser What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...
General SKU253S187 LocationBarneveld CEcheck MakeGrundfos (DK) Pressure Working pressure16 Bar Main Features MaterialStainless steel Volume16000 Ltr. Motor7.5 KW Specified Features - Centrifugal Pump Number of pumps:1 Capacity16 M3/h With motor7.5 kW 400 Volt Inletdia. 50mm Outletdia. 50mm Centrifugal Pumps MaterialStainless steel 1.4401 (316) Information TypeCRN16-70 A-P-G-BUBE Mach.No.B33630007P10241 Year of constructionunknown Floorspace0,3x0,3 M Total height1,1 M Weight120 KgCentrifugal PumpsGrundfosPumps > Centrifugal PumpsBrand > Grundfos What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Used Used Kegs Filler Alfred Gruber Anlagenbau: Year: 1991 Condition: Good Used Kegs Filler Alfred Gruber Anlagenbau: Model: 2/1 Year: 1991 Speed: 40 keg/h For beer Safety protections Code: T 208 More details: https://bottlingscout.com
Used Used filler Stone gravty filling 4.000 bph: Year: 2015 Condition: Good Used filler Stone Year: 2015 Speed: 4.000 bph Direction: Clockwise 20 filling valves Type of filling: Gravity filling Safety protections Filler Code: T 154 More details: https://bottlingscout.com
Automatic filling and capping machine for bottles and jars 100-1000ml, capacity 16-20 pcs/m, capping is suitable for pump dispensers or caps
GRUNDFOS brand in-line dry break pump model TPD 50-430/2 A-F-A-BQQE. Technical characteristics Model TPD 50-430/2 A-F-A-BQQE MANOMETRIC HEIGHT 29.6 Maximum pressure 16 bar Maximum temperature 120 ºC Documentation No documentation Maximum Flow Maximum flow rate 32.7 m3/h Status In your state Manufactured by GRUNDFOS
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste., Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends., Key Features:, - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway, - Adjustable fill heights and speeds to accommodate tubs from sma ...
cutting width: 300 mm Cutting height: 85 mm Motor output: 1,5 kW saw-blade dia.: 300 mm connected load frequency: 380 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Grunwald Fully automatic cup filling and sealing system - 3 Format sets (BJ 2019) - Ink-jet encoding - Conveyor belt extension - Dosing bar incl. aerator inserts (BJ 2020) Filling Temperature: Cold Filling Cup: A) Round plastic bucket with handle and collection basket, ø175 x H 131 mm B) Round plastic cup, approx. ø 104 x H 55 or 65 mm C) Round plastic bucket with handle and grass collector, ø 227 x H 194 mm Lid: A+C) Plastic slip-on lid (tamper-evident closure) B) Pre-punched plastic blanks + slip-on lid Connected load: approx. 12 kW, 3/400 V/N/PE, 50 Hz Air requirement: dry, filtered compressed air, 6 bar, approx. 300 l/min. Dimensions: approx. L 2,200 x W 2,200 x H 3,200 mm (without removal belt and control cabinet) Weight: approx. 3,500 kg Condition: well-maintained, in working order Availability: immediately
W&P rack oven type REC 1020 Year of construction 02/2017 (test laboratory) NAVIGO control Gas burners Ramp Hood
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
Condition: New, In Stock / Mint / Unused Brand: Grundfos Type: CRN-3-6-A-P-G-V-HUBV Model No.: -PN-SN A-99884747-10000012 Type: CRN1-8 X-FGJ-A-N Flow rate: 1.8 m³/h Height: 38.5 m Maximum lifting height: 50 m Maximum pressure/temperature: 25/120 bar/°C Motor: Three-phase 400 V – 0.75 kW – 2900 rpm – IE3 Voltage: Three-phase current 400 volts Power: 0.75 kW Weight: 32 kg Dimensions (W x H): 70 cm x 20 cm x 30 cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Two Groba ascending conveyors are available. 1) Length: 5700mm, height: 2900mm, outer corrugated edge width: 540mm, inner corrugated edge width: 480mm, cleat height: 35mm. 2) Height: 3500mm, length: 4600mm, width: 500mm, cleat height: 35mm.
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...
(1978) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1978 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Frame Width: 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time: 206 ms Safety Distance: 330 mm
(1979) 630t Gräbener Knuckle-Joint Press Industrial Knuckle-Joint Press for High-Force Cold Forming This Gräbener press utilizes a knuckle-joint mechanism to deliver exceptional force, making it highly effective for precision coining and embossing. With a massive 27,000 kg frame and a 28 kW motor, it provides the stability required for heavy-duty metalworking operations. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 630 NS Year of Manufacture: 1979 Nominal Capacity: 630t Stroke Rate: 45 strokes/min Shut Height: 420 mm Tool Holder Adjustment: 80 mm Clearance Between Uprights (Frame Width): 820 mm Table Area (Width x Depth): 800 mm x 850 mm Motor Output: 28 kW Motor Speed: 1,475 rpm Operating Voltage: 3x 380V / 220V, 50Hz Total Weight: 27,000 kg Overrun Time (Stopping Time): 160 ms Safety Distance: 266 mm
maximum number of results exceeded
please refine your search
