tri gr used for sale

HANS GROHNI GH 524 -Year 2008, Only one owner Sheet-fed offset press - Printing units: 4 colours straight Counter: 11 million Technical features: Speed max : 12,000 sph Paper size max: 520 x 370 mm Paper size min: 148x100 mm Paper thickness: 0,04 to 0,4 mms Print size: 510x360 mm Plate size: 510 x 410 x 0.15 mm Power : 12 Kw - 3 phase / 200V 50/60Hz 60A Dimensions: L. 4,34 mt. P. 2,20 mt. H.1,70 mt. Weight 8.000 Kg. circa Accessories included: - Fully equipped - SAPC - Semi automatic plate change - Laser duct inks - Chrome Cylinders - Rotary stream vacuum tape suction feed board - 2 feeder boards - Electromechanic double sheet detection - Electronic double sheet detection - Alcool dampening system with alcohol metering; cooling and re-circulation unit system - Powder sprayer device - Automatic roll wash device, plate cocking - Low pile - Tools, Docume ...

Capacity: 3.404 Ltr. Operating pressure: 2.0 bar, with test book Year of Make: 1986 Manuf.: Gresser Material: stainless steel, 1.4301 Type: Cylindrical sthd, on 4 feet, outlet with disc valve DN 40, pulled down cleaning line with fitting, pedestal hose, manhole cover last use: beer Height approx. 2,500 mm (with cleaning line) Diameter: approx. 1,505 mm Please send inquiries to: infohochholzer

Used Used Borelli gravity monoblock 6.6.1. for natural straight cork: Year: 2015 Condition: As Is Model: KA606S0 Year: 2015 Rotation direction: clockwise Rinser with 6 fixed-nozzle clamps Single water treatment Gravity filler with 6 mechanical valves Vacuum system before corking Inert gas injection system before corking Single-head corker for flush cork Code: QT 807 More details: https://bottlingscout.com

Used Used Emma gravity can filling monoblock: Year: 2022 Condition: As Is Model: CF2 Year: 2022 Linear from left to right 2 valves for blowing Filler with 2 electronic gravity valves Single-head seamer Cap size: 202 for 25cl cans Inert gas injection system before seaming Distribution system: on-the-fly pick-up Safety protection Code: QT 810 More details: https://bottlingscout.com

Used Used Gramegna shrink wrapper: Year: 1995 Condition: As Is Year: 1995 Speed: 8 ppm Type of shrink: 2x3, 4x3, 1x6 Operation: semi-automatic Version: sealing bar Type: film only Safety protection Code: F 85 More details: https://bottlingscout.com

Separating tool, punching tool, punch, punch die, punch stamp, die holder -Punch tool: Notching tool -Type: Size 1 1/4 -Dimensions: see photos -Dimensions: 270/180/H235 mm -Weight: 25.4 kg

Punching machine (heavy duty), De Groot, Model Punching, Year 1980, Width 600 mm, Available Direct, Width: 600 mm

Graule AGT combined pull-through and table circular saw. The pull-through saw can be tilted and swivelled. The machine can also be used solely as a pull-through saw by removing the table. Cutting height 85/40 mm Technical data: Cutting length: max. 380 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

The Graule ZS 85 N mitre saw is designed for cutting to length and making mitre cuts: it can be swivelled and tilted. Cutting height 85 mm Cutting length 380 mm Technical data: Motor: 1.5 kW Connection: 380 V Condition: Gebraucht Location: Tauberbischofsheim, Germany

width of the strips: mm band length: mm band speed: m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Greaves 1000L high shear mixing vessel 316 stainless 1000L high shear mixing vessels, side inspection doors for shear maintance, 13Kw motors, highshear overhauled 2017, level detection, 50mm discharge pipe, 3Ph

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Ou ...

Shipping weight: ? kg Packing: 1200 x 800 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 6.000 kg/h Electric power: 55 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 131 Length: 205 Height: 245

1.Powder curing furnace 2,000 x 1,900 x 2,000mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fans and heat-resistant bea ...

Grinder for frozen block meat Throughput depends on material type, speed, and cutting set Capacity: up to 8.000 kg/h Electric power: 66 KW Voltage: 380 V, 50 Hz Dimensions of the machine in cm: Width: 235 Length: 200 Height: 185

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

M. No.: 00020 Type: Transfer device R3 Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

Type Slicers / Guillotines for frozen meat Height 1400 mm Width 1500 mm Length 1600 mm Power supply: 400V 50Hz 3N Total power 1.5 kW

Max. size= 45 x 45 cm, Availability= 062024, numbering-perforating-scoring-slitting-systems Max. Size 45.7cm x45.7cm Min. Size 7.6cm x 12.7cm Paper Weight 45-300gsm Feeder Friction Drive Unit Type Pneumatic Numbering Heads 2 Microprocessor controlled, easy programming Electrical 220V/50Hz/5A Dimensions 1.73×0.69×1.17m Weight app 90 kg LOT Loaded in truck or container

Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 10 collets -Various sizes: 5-25 mm -Drawing in the pictures -Price/Sale: complete -Weight: 2.1 kg

- Optional Box table 800 x 500 x 5000 mm - Tailstock swivable for accurate drilling

Used homogenizer AK SYSTEMS, type: Hydro Grind laboratory system 50 liters For the production of liquid to medium-viscosity emulsions, dispersions or suspensions - Laboratory equipment with a capacity of 50 litres - All-in-one solution for food, cosmetics, chemicals and pharmaceuticals - Enables easy introduction of solids into liquids - Allows homogenization into a fine droplet structure - Vacuum container - With double jacket for heating or cooling (2 bar) - Maximum temperature in the container: 95°C -Vacuum pump - Connection: 400 V, 50 Hz, 3Ph, 8.0 kW - Weight: 120 kg (without control cabinet) - Condition: Good, ready to use Visits and test runs are possible by arrangement.

GRUNDFOS PUMPS TYPE CR32-2-2 A-F-A-E-HQQE 3 KW; Q 30M/H TYPE CR32-2-A-F-A-E-HQQE 4KW; Q 30M/H

Zähler für Falzmaschinen - Counter for Folding machines Gremser VZG 10-4 Year 1988 - Serial-No. 1686 with pulserless - to move Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Tilting spindle model, -45? ? 45? 5.5 kW motor, 1500/3000/4500/6000/9000 rpm Usefull spindle length: 180 mm Motorised height and angle adjustment with digital display Spindle diameter 50 mm Aigner guide Tornado feeder with 4 wheels

Druck- und Vakuumkompressor - Pressure and Vacuum Pump Rietschle VEB GR2HVX SN. MA24F165L2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515721 / 186781/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR31C-ZID.DC.CR Item number: 7515722 / 188445/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR31C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DC.CR Item number: 7515723 / 188443/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DC.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.

Sell: Ventilation module GR35C-ZID.DG.CR Item number: 7515724 / 188446/H01 New, unused centrifugal fans from remaining stock for sale at very attractive prices. The product is reliable and robust. The GR35C-ZID.DG.CR is a high-quality ventilation module, ideal for industrial and commercial applications where efficient air circulation and cooling is required. Equipped with backward-curved blades, it ensures optimal airflow and high energy efficiency. This module is designed for use in demanding environments and offers reliable performance and durability.