133,687 used machines on RESALE, but how to find them? Machine Search
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 660 mm -Taper cone: Ø mm -Thread mounting inside: M124 x 6 mm -Through hole: Ø mm -Weight: 170 kg
Knife disinfection machine, knife disinfection device -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg
Type: Elixa 35 Libra Year of construction 2017 Capacity up to 35 packs per minute - Automatic shell detection - Automatic weighing system - Film type: • PVC or PE stretch film • Film width 280 mm Machine is in very good condition. Is dismantled and can be visited in Leipzig.
Load trestle, swivel trestle, lifting trestle, shackle, load jack -different sizes: see pictures -4x: 15 tons -4x: 15 tons -8x: 5 tons -4x: 10 tons -various sizes: on shackle -Total number: 30 pieces -Price: complete -Weight: 168 kg
Mixing Grinder 114 mm hole plate diameter Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 5 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 80 Length: 130 Height: 145 Hopper capacity approx 150 liters (mixing capacity depending on meat up to 100 kg) Worm, worm housing, and closing are completely stainless Delivery time: after the advanced payment machine is ready for delivery
MIG/MAG hose package -Length: 3.5 m -Plug -Gas cooled -Weight: 2.8 kg
Gray cast iron underfloor box -Manufacturer: Bethmann lightning protection and lightning protection Kransteiner -Opening: 115 x 170 mm -Number: 3x available -Price: per piece -Dimensions: 272/195/H115 mm -Weight: 5.2 kg
Throughput depending on material type, speed, and cutting set Capacity: up to 2.500 kg/h Main motor power: 10 KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 125 Delivery time: 5 working days after advanced payment
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Quantity: 15 collets -Various sizes: Ø 3/3x4/2x3/2x6/7/3x8/9/10/11 mm -Price/Sale: complete -Weight: 1 kg
Pressure booster system, dry rotor pump heating pump centrifugal pump, water pump, inline pump used 2 pumps Manufacturer: Grundfos Type TP 150-250/4 A-F-A-BQQE Q 2x 295 m³/h at 20.4 m 16 bar 120°C 22 kW with pump control 96754726 Dimensions approx. 2500 x 1300 x 1600 mm All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.
Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm
Conveyor belt, belt conveyor, transport belt, belt conveyor -Belt width: 2x 50 mm -Width: adjustable -Conveyor belt length: 1440 mm -Drive: 0.37 kW -Speed: 71 rpm -Conveyor belt rotatable via servo motor -Height: adjustable -Dimensions: 1440/550/H950 mm -Weight: approx. 150 kg
transformer -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm
transformer -Type: EE 355 -Primary: 380 V -Secondary: 220 V 1.45 A/21 - 24 V 1.5 A -Dimensions: 120/100/H130 mm -Weight: 5.3 kg
2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.
End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175
Stick electrodes 4.0 x 350 -Type: Gricon 515 S -Price: per package -Number: 2 packages available -Weight per package: 5.3 kg
Stick electrodes 4.0 x 350 -Type: Phoenix SH Green TB -Weight: 4.7 kg
Stick electrodes 2.5 x 350 -Type: Gricon 8 A Price: per package -Number: 3 packages available -Weight per package: 4.6 kg
Manufacturer: Grundfos Type: CME 3-5 A-R-I-E-AQQE S-A-D-N Condition: as new (short in operation) Pump speed: 3480 1/min Nominal flow rate: 3.72 m³/h Nominal head: 49.62 m Number of wheels: 5 Ambient temperature: -20 .. 55 °C operating pressure: 16 bar Location: Homburg
Foil wrapping machine with shrinking tunnel manufacturer: Gramegna type: Champion year of manufacturing: 2000 capacity: up to 7.000 bph for wrapping PET bottles into foil and shrinking afterwards
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Cone size: 6 -Short cone mount for: bayonet disc -Short taper mount: Ø 106.375 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 90 mm -Weight: 51 kg
working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h
CATALOG NUMBER 6679 TECHNICAL DATA - max width of the workpiece 250mm - max height of the workpiece 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal, upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360 ° 5.5kW - 6 electrically adjustable spindle up / down - all adjustable spindles up / down, right / left - diameter of the spindles 40mm - 6 introductory pulling rollers, toothed, including 2 double ones - 6 rollers leading out, pulling, rubber, smooth, including 2 double - 2 clamps from above - from the bottom, a roller introducing toothed, pulling, torsion in the table before the first spindle - at the bottom, 2 pulling rollers, metal, smooth - 4 side clamps at the bottom - feed on cardan shafts - pneumatically pressed rollers - smooth regulati ...
Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, clamping sleeves -Number: 32 pieces adapter sleeves -different: sizes and manufacturers -Sale: only as a package
Key data: 520 , 9
L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE
Stick electrodes 4.0 x 350 -Type: Phoenix Green S -Price: per package -Number: 1 packages available -Weight per package: 4.7 kg
Stick electrodes 4.0 x 450 -Type: SH Green K 50 W -Price: per package -Number: 6 packages available -Weight per package: 6.2 kg
Stick electrodes 4.0 x 350 -Type: Phoenix Green T -Price: per package -Number: 4 packages available -Weight per package: 4.6 kg
Stick electrodes 4.0 x 450 -Type: Phoenix Green T -Price: per package -Number: 14 packages available -Weight per package: 5.8 kg
bore diameter: 50 mm throat: 3000 mm workpiece height: max. 200 mm total power requirement: 75 kW weight of the machine ca.: 27 t dimensions of the machine ca.: m Brand: CMA Type: GRD50 CNZ 13030 Year of make: 2010 Capacity: 50 mm X: 3.000 mm Y: 13.000 mm Z: 400 mm Spindle taper: N: 3.000 Power : 75 kW Speed: 3.000 RPM Machine weight: 27.000 kg Tap capacity: M30 Drilling depth: 150-200 mm Bed: 13,000 x 3,000 mm Max. workpiece weight: 1,500 kg /m2 Tool changer: 12 pieces External spindle cooling Chip conveyor Can be seen working at a external location The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm -Weight: 11 kg
Multipurpose hoist, grab hoist, hoist, assembly hoist, rope hoist, universal rope hoist -Manufacturer: Greifzug -Cable with: 3000 kg load capacity -Number: 2x available -Price: per piece -Dimensions: 690/140/H370 mm -Weight: 28 kg
Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Mouth size: Ø 500 mm -Short taper mount for: bayonet disc attachment, taper size 8 -Bolt circle: Ø 171.4 mm -Weight: 96 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 500 mm -Short taper mount for: bayonet mount -Cone size 6, bolt circle: Ø 133.4 mm -Weight: 73 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 490 mm -Short taper mount for: bayonet disc mounting, cone size 8 -Hole circle: Ø 171.4 mm -Weight: 72 kg
Drawbar, drawbar, truck trailer -Max. Load: 55,000 kg -Bearing: 98 mm -Inner dimensions bearing: 882 mm -Drawbar length: 1600 mm -Eye: Ø 49 mm -Drawing with the pictures -Transport dimensions: 1100/1600/H260 mm -Own weight: 86 kg
Available in stock 1 x Used GrimmerSchmidt Compressor. The compressor was installed in a biogas valorization plant that stopped working. Now the equipment is stored in our warehouse. The equipment is used but in good working conditions. RPM: 6600 RPM Flow: 30 CFM Rating: 80 psig Main Motor Voltage: 460 / 380 V Main Motor Frequency: 50 Hz Main Motor Horsepower: 7.5 hp
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 400 mm -Short taper mount: Ø 106 mm -Bolt circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 30 kg
Brand: GEA Cooling capacity: 350 kW Refrigerant circuit: 1 pcs. Type of refrigerant: R717 Year of manufacture: 2005 Compressors: 1 pcs. reciprocating GRASSO Heat exchanger: Shell and tube Dimensions: 3.60 x 1.20 x 2.00 m Weight: 1930 kg Condition: Good
Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 810 mm -Length: 1205 mm -Working height: 820 mm -with supporting ribs -Sheet thickness: 25 mm -Weight: 260 kg
Quick change tool holder, tool holder head, quick change tool holder -Quick change toolholder holder: without tension clamp -Manufacturer: Multifix -Size: D -with mounting for: mounting on the support -Dimensions: 278/250/263 mm -Weight: 33 kg
Horizontal drill rig, with rods on low-loaders and trucks with swivel wall boxes. Tracto Technik GRUNDODRILL 15XP complete train approx. 180m poles DB 2546 L 6x2 MP3, 467.000km Tandem low-loader trailer Complete train from 2009 ! Vehicle may be covered with advertising, labeling and/or labeling residues. Our offer is generally without new HU/AU/SP acceptance. On request, we will be happy to make you an offer from our partner workshops. Errors, typing errors and prior sale excepted. Please do not hesitate to contact us.
electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg
Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 330 mm -Taper cone: Ø mm -Thread holder inside: M56 x 5 mm -Through hole: Ø 51 mm -Weight: 23 kg
Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Mouth size: Ø 460 mm -Cone mounting: Ø 100 mm -Threaded mounting (outer): 152 mm pitch 6G 1 3/8 1 1/2 -Through hole: Ø 84 mm -Weight: 56 kg
maximum number of results exceeded
please refine your search
