tri block used for sale

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Working Sizes: 1300 x 3500 mm

We offer two Deutz/MWM type for purchase: TBG 604 CV16. The CHPs ran flawlessly until they were decommissioned. Scope of delivery: engine, generator, control cabinet, gas section, exhaust heat exchanger, silencer and documents.

Qty. 1 Second-hand spinner block Mfc.: Mannesmann Demag Built: 1981 Modernised: 1991-1995 Basket dia.: 1524 mm – 60 Pulling speed: max. 1000 m/min. Pulling force: 6.5 T at 250 m/min. Capacity: 6800 t/annum Entry tube dia.: up to 42 mm Wall thickness: up to 2.0 mm Exit tube dia.: 5 – 39 mm Wall thickness: min. 0.3 mm

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Very Good Condition Wartsila V32 Block for Sale

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; Heat guide plate; Stand unit. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

Producer : Fischer & Krecke Type Combi 43 BB year: 1993 Bag width : 100 - 280 mm. Cut-off length : 280 - 580 mm. Bottom width : 50 - 180 mm. Mechanical speed : 250 bags / min. 2 unwinds for 2 ply bags With 2 flexo printing unit (or 3 units with 1 ply bag) notch cut unit

Producer : Fischer & Krecke Type Combi 31 BB year: 1980 Bag width 120 – 260 mm. Cut-off length 250 – 460 mm. Bottom width 45 – 120 mm. Mechanical speed : 250 bags / min. 2 unwinds for 2 ply bags With 1 flexo printing unit (or 2 units with 1 ply bag) notch cut unit

Corpus press (used) Press for assembly of hulls (b/u) Good quality In good condition Pressurized area of the 800x570 mm Pneumatic cylinders: Number of pneumatic cylinders: 4 Step between stating hole: Distance between fixing holes: 50 mm Compressed air pressure Compressed Air 8 bar Transport dimensions Transport Sizes 1950x600x1150mm Weigh Weight 350Kg

Machine a blocs mobile Contec SP 5 pour la fabrication des blocs, hourdis, blocs U, pavee, bordures, blocs mur etc. Max hauteur de produit 300 mm Min hauteur de produit 100 mm surface travaillant max. 1000 x 500 mm Capacité: jusqu´a 3.500 blocs 400 x 200 x 200 mm / 8-heures poste de production

Recon Cylinder block ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Manufacturer: EDUR Type: NUBS 700 6148L Built: 2015 Condition: looks good, overhauled Weight: 132 kg Volume flow: 98 m3/h Power: 7 kW Speed: 2900 rpm Operating pressure: 10 bar Head: 18 m

Recon Part number: 0208 9102 Old engine number: #7300402 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. --------------------------------------------------------------------- If you have any further questions, please do not hesitate to contact us!

Paving stone form #5302 Overall dimensions: 1550 x 1300 x 400 mm Weight: 870 kg The paving stones dimension can be seen on the photo. The height of the paving stone what can be produce: 70 mm

Recon -Engine number: 30013 -Basisrgasse: Standard -Y.O.M. 1993 -1320KW/1000rpm -Casting 1.14.5-1111-00.02 493 GGG50 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. --------------------------------------------------------------------- If you have any further questions, please do not hesitate to contact us!

throat: 1800 mm workpiece height: 750 mm Travel: 4000 mm table width: 5500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pallet size 1.270 x 1.050 x 125 mm Production area Max. 1.240 x 1.000 mm Block height Max. 500 mm Min. 50 mm Year 2006 With Spare parts (pumps, motors etc..) With 5 pieces molds and 300 pieces metal pallets Machine maintained than dismantled

W&H Block bottom heat seal machine for air sickness bags

complete 230kW

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

We offer a Liebherr G944 for sale.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Block glue press Müro 5000/A2 WT; Working width 705mm; 3x dryer; Stack increase; heat deflector; Stand-standing device. Padding press Müro 5000/A2 WT; working width 705mm; 3x dryer; pile elevation; heating sheet; floor mounted machine.

RECON Part number: 524 011 26 01 #524100554 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

with 14 shapes with 14 Forms

Triumph 2 for sale. Bag width : 75 – 190 mm Bottom : 40 – 110 mm Bag length : 180 – 470 mm The machine is equipped with: W&H 4 colour QMS 992 flexo printing unit Including 28 printing cylinders. 10 form plates 2 unwinds for making 2 layers of paper.

Producer Windmoeller & Hoelscher Type Triumph 3 A Bag width 160 - 320 mm. Tube length 240 - 900 mm. Bottom width 70 - 180 mm. With 3 unwinds for 3-ply bags, the middle layer is plast. With photo cell for pre-printed reels. With bottom patch unit With handle punch unit.

CHP MAN E2866DE Year of construction 1988 Gas engine 106KW with Piller Generator 120KW Electrical power in used condition for sale. Without guarantee or warranty to traders. Not tested.

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

Stationary block machine SUMAB R-500 – automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated). Working pallet dimension: 1400 x 700 mm. Useful area Max.: 1250 x 650 mm. With stationary block making machine Sumab R-500 following concrete products are produced on efficient way: hollow blocks, insulated blocks, paving stones, curbstones and others. Production capacity in 8 h/100%: Hollow blocks: 12960 pieces (20x20x40 cm) Paving stone: 864-1016 m2 (10x20x6 cm) For more information, please send a request.

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Our company offers the SUMAB E-12, which is a movable concrete block machine. The E-12 is a block machine that uses a technique known as egg laying,” where the block machine moves and produces concrete block products on the ground to dry – We offer the machine in fully/semi-automatic modes. With the SUMAB E-12, the following concrete products can be produced in an efficient way: • Hollow block stones • Solid block stones • Chimneys • Light weight blocks • Paving stones [with vibration table option] additional option Production capacity: For hollow blocks 400 x 200 x 200 mm ………. 1.200 blocks/h. For hollow blocks 400 x 200 x 120 mm ………. 2.000 blocks/h.

We offer three Jenbacher J 616 GS E 02 for sale. Specifications: Engine: Jenbacher Type: J 616 GS E02 Power: 2495 KW Year of construction: 2007 Generator: AVK Type: DIG 140 k/ 4W Power: 3013 KVA Voltage: 10 KV Frequency: 50 Hz Year of construction: 2007 Scope of delivery: complete system, except transformer and table cooler

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available

CW200-16 ENGINE BLOCK new unused

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Plummer Block Housings, Plummer Block Housings -Shaft: Ø 45 mm

Chopping block -Dimensions: 600/600/H220 mm -Height: 750 mm -with: underframe

Hydraulic 20 T single-stand production press for the production of lightweight concrete parts Here are the technical data of the offered machine: If the press does not exactly meet your requirements profile, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Technical data + information: a) Closing speed up to 10 mm/sec b) Opening speed up to 20 mm/sec c) Open maximum height 300 mm d) Pressing speed 4 – 10 mm/sec. ( adjustable via rotary knob ) e) Mould size 600x800 mm f) Plunger size950x600 mm g) Manual lubrication( via lubrication nipples ) h) Pressure setting from 5 T to 20 ( adjustable via rotary knob ) i) Travel 300 mm j) Construction, commissioning, instruction against separate calculation  ...

MAN 3262 E302 275-550 kw electric power, 50 Hz plug and play units IN/Outdoor Container . All info in request PM Thanks previously advance

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Generator K-EA-3ST-PAR-SYN-M 500 kVA 400/231 V Synchronous 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Dimensions unit: approx. 2500 x 1200 x 1500 mm, control cabinet approx. 2400 x 500 x 2000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Diesel combined heat and power plant, CHP, generator set, power generator used DIETER KUNZLER GmbH Year: 1991 Generator 250DMED 250 kVA 400/231 V 3x 362 A 50 Hz Mtu 12 V 183 AA 31 MERCEDES OM 424 225 kW 1500 rpm Container dimensions: approx. 6000 x 2500 x 2500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Available in stock 1 x Alfa-Laval Solenoid Valve Block (1763524-80). The equipment was NEVER USED.

Manufacturer: Fatosa Type: TBG 480 Year of construction: 2004 Power: 5.5 kW Connection: 400 V Productivity: up to 3000 kg/h Maximum size of blocks: 600 x 480 x 250 mm Max block temperature : -20°C Net weight: 550 kg Dimensions: length 1350 x width 700 x height 1750 cm With raised front cover - Height 2117 mm The guillotine is only equipped with a cross-cutting knife. Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT No.: PL547-17-47-669 phone 0048/33 812 58 60 fax. 0048/33 812 58 36

Producer : Windmoeller & Hoelscher Type : Triumph 3 A Bag width : 160 - 320 mm. Tube length : 240 - 900 mm. Bottom width : 70 - 180 mm. With : 2 unwinds for 2-ply bags With servo gear With : photo cell