tri block used for sale

Working Capacity 5-10mm, working width up to 1 meter, + plate cutter Auction-ID: A1-45866-72

Package of 80 Triple Rhombus Oak planks, including 12 bags of mounting brackets + screws and 12 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 20.5 centimeters Working width: 19.5 centimeters Auction-ID: A1-40135-290

Package of 120 Triple Rhombus Oak planks, including 17 bags of mounting brackets + screws and 20 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 20.5 centimeters Working width: 19.5 centimeters Auction-ID: A1-40135-291

Triple mowing set consisting of: Fendt Slicer 310 FQ KC and Fendt Slicer 991 TLKC; approximately 6300 hectares mowed; both built in 2020 Auction-ID: A1-40135-43

Seadoo Spark Trixx | 2018 | Jetloader | IBR | VTS | Seadoo Fenders | Recent maintenance | 123hrs | Neat condition | Storage compartment | Gripgear saddle | Swimming ladder | LED lighting (Waterproof) | Type: Water Scooter Power: 66 kW (90 HP) Number of cylinders: 3 Draught: 0.30 m Dimensions (LxW): 279 x 118 cm Engine brand: Rotax 900ACE HO Tank capacity: 40 litres Sea-Doo Spark 2up Trixx in very neat condition equipped with an economical Rotax 900HO ACE (110 hp) 4-TEC In addition, it is equipped with the following options: Grip-gear saddle VTS (Virtual Trim System) IBR Swimming ladder Performace Stainless Steel Wearring & Impeller Maintenance: - 02-2025: Wearring stainless steel Major service (Oil, Spark plug, Filters, Battery, Fluids) - New trailer wheel bearings (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot ...

Package of 160 Triple Rhombus Oak planks, including 23 bags of mounting brackets + screws and 32 pieces of start/end profiles; Unused in packaging. Length: 290 centimeters Width: 20.5 centimeters Working width: 19.5 centimeters Auction-ID: A1-40135-292

Stage curtain pull motor Curtain track Rail fastening Pulleys Hauling ropes Roles Cable set Triggers Train control Lasting Auction-ID: A1-45889-2578

Cable ducts + luminaires Hager + OBO + Trilux, larger batch of cable ducts and bulbs in various designs Auction-ID: A7-45960-45

Pallet of electrical installation material Trinnity + Schlegel, motor control units for awnings, cable clamps blue, cable clamps Auction-ID: A7-45960-42

pressure:65 t distance between columns:930 mm stroke:1100 mm distance table/ram, stroke up:2400 mm table surface area:1340x700 / 930x1085 mm hole in the table:320x260 / 600x410 mm table height over floor:850 mm side window:700 mm ram surface:990 x 930 mm power requirement:15,0 kW weight:8,0 t Dimensions (WxDxH):2,8 x 2,6 x 5,2 m blank holder / ejector in ram:hydraulic side shifting device:hydraulic

Pressure:100 t distance between columns:910 mm stroke:600 mm distance table/ram, stroke up:1000 mm table surface area:1340x680 / 910x1085 mm hole in the table:700 x 510 mm table height over floor:800 mm side window:680 mm ram surface:1230x680 / 910x1000 mm capacity of ejector:7,5 t ejector stroke:150 mm power requirement:15,0 kW weight:9,5 t Dimensions (WxDxH):2,3 x 1,9 x 3,6 m light guard:Sick blank holder / ejector in ram:hydraulisch

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2\" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine Auction-ID: A7-46048-28

Without clamping devices and supports, only the press Technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-20D Year of Make: 1994 Machine Type: Hydraulic trimming press Press force: 200 kN Retraction force: 35 kN Max. stroke: 500 mm Installation height: 800 mm Speeds: Fast forward: 620 mm/s Pressing cycle: 90 mm/s Return: 540 mm/s Hydraulic pressure: max. 175 bar Fuel tank capacity: 355 l Pneumatics: min. 6 bar, connection R1/2" Motor power: 7.5 kW Connected load: 8 kVA Control voltage: 24 V Clamping surface: Table: 800 x 600 mm Plunger: 800 x 500 mm Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration Vertical construction Suitable for die casting deburring processes Documentation available Used machine

Very neat and fully cleaned + polished electric forklift, immediately usable for professional use. Technical specifications Brand/Type: Still RX20-16 Year of construction: 2019 Operating hours: 21,330 hours Lifting capacity: 1600 kg Lifting height: 6050 mm Headroom: 2600 mm Free lift: 2060 mm Mast: Plywood Fork length: 1200 mm Fork width: 330 – 1000 mm (adjustable) Add-on parts: Fork spreader + Side-shift Wheels: 3-wheel version ⚡ Drive & battery Drive: Electric Battery: 48V – 625Ah Battery year: 2019 Charger included ️ Options & equipment Full cab Heating Joystick control Work lights Non-marking tires (suitable for indoor use) Free levy Documentation Documentation available CE marking available Serial Number: 516221V01609 Transport & dimensions Dimensions: 2000 x 1200 x 2600 mm Weight: 3432 kg Number of packages: 1 Terms and conditions Collection possible Free loading on tr ...

Without clamping devices and technical data Manufacturer: REIS GmbH & Co. Maschinenfabrik Type: EC 8-30 PLC Year of Make: 1993 Machine Type: Hydraulic trimming press Nominal force: 300 kN Retraction force: 42 kN Max. stroke: 500 mm Installation height: 800 mm Clamping area: 800 x 600 mm T-slots: 18 mm Motor power: 7.5 kW Connected load: 8 kVA Voltage: 380 / 660 V Frequency: 50 Hz Hydraulic pressure: up to 200 bar Hydraulic pump: E-A10VSO45DRL/30R-PPA12 Hydraulic Medium: HFC Dimensions (L x W x H): 1895 x 1400 x 3150 mm Weight: approx. 5000 kg Configuration PLC control Vertical stud design Suitable for die casting deburring processes Documentation available Condition used d Pads, only the press Auction-ID: A7-46048-27

Trimming machine Make: VITAP Type: RC 92 New machine Technical data: - 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter; - 2 cutter heads with cutters one knife straight 15° the other radius 3mm; - CE standards Options (for a surcharge): - Couple of cutters (without knives) ? 274,00 - Set 8 knives 15 degrees angle and radius 2 mms. ? 122,00 - Set 8 knives 15 degrees angle and radius 3 mms. ? 122,00 - Pneumatic lifting of the upper motor ? 474,00 - Optional for panels max. high 120 mms ? 227,00