tri block used for sale

500x630xH660mm Including batch accessories

350x300xH450mm

500x630xH660mm Including batch accessories

320x300xH620mm

500x630xH180mm Including batch accessories

800x630xH880mm Including batch accessories

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

500x620xH580mm Including batch accessories

590x570xH1190mm

580x350xH1200mm & 600x380xH1180mm

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm 8 pieces 1300 x 490 mm Pos. 7 Masonry formwork 18000 / 1300 x 4 ...

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

Used brick production line Make OMAG with Teka mixing plant approx. 20 shapes approx. 3,000 pieces of production boards 1400x950mm Used concrete block production plant / pavers production plant Manufacturer: OMAG Teka mixers about 20 moulds about 3000 production boards 1400x950mm

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Vertical Trend and Slit Band Saw Fabr. Raimann Type B 11 Built in 1983 Roller diameter 110 mm Roll width 100 mm Speed -580 rpm Engine 18.5 Kw Cutting width R/L of sheet-200 mm each Cutting height 200 mm Feed continuously variable 10-40 m/min 1.5 kw Band saw blade length 6300-6500 mm Electro-motor blade clamping Pneumatic roller slide adjustment

RECON Part Number: 1230 1226 #2204506 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts available from different manufacturers / types. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

4 x valve block with interface module EX250-SDN1 and with 20 x solenoid valve SV2100R-5FU

Crankcase for Mitsubishi S6R-PTA for sale. Year of Make: 2012 Power: 515KW/1500RPM

1 Continuous Block Caster Mfc.: Fata Hunter Built: 1999 Capacity: 9 T/h Block size: 350-480 x 26 mm – W x T Flat bed / solidify length: 1.3 m

Key data: 330 , 413 , 400

Liebherr gas generator with the following features: Year of construction: 2013 Power: 330kW / 413kVA Voltage: 400V Frequency: 50Hz Complete including external control cabinet and gas line.

Key data: 880 KW, 1445 kVA, 400 V

MTU Gas CHP 8V4000 L63 (GB849N5) Gas electricity and heat generator from 2012 with 60,100 operating hours, complete with controller, exhaust gas heat exchanger, exhaust silencer, cables, etc. 1 available 848 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford PE734C2, 1,445 KVA Manufacturer: MTU Model: 8V 4000 L63 GB849N5 Type: Gas Engine Serial number: E 22345 Power [KWel]: 849 Year of Make: 2012 Hours: 60,100 Weight unit [kg]: 9,900 Engine: MTU 8V 4000 L63 Engine power [KW]: 880 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12I382136 Power [KVA]: 1,445 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2086 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 2.967

Key data: 147 KW, 168 kVA, 400 V

SEnergie Gas Generator (CHP) G926 TI. K Gas electricity and heat generator from 2012 with 95,000 operating hours, complete with control and cooling. 1 available 125 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer, 168 KVA Manufacturer: Liebherr Model: G926 TI. K Type: Electricity and Heat Generator Serial number: 12P23010-0423 Power [KW]: 147 Power [KWel]: 125 Voltage [V]: 400 Current [A]: 226 Frequency [Hz]: 50 Year of Make: 2012 Hours: 95,000 Weight unit [kg]: 2,876 Dimensions LxWxH [cm]: 3.5 x 1.0 x 2.1

Key data: 2500

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 10.5 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Trak tasmowy Primultini SG1300 ,wozek podawczy CEE IEC,dlugosc wozka 5 metrow

ID3396 OMAG - Brick paver / Stone paver year/Baujahr 2001 Brick paver, conversion of additional hydraulic unit for surcharge 2020 (40,000 euros), conversion to servo vibration with conversion to S7 control 2016 (120,000 euros), conversion of digital path measurement mould and bear 2017 (4,000 euros), new core filling trolley 2017 (22,000 euros) Stone paver, conversion of additional hydraulic unit for load 2020 (40,000 euros), conversion to servo vibration with conversion to control system S7 2016 (120,000 euros), conversion of digital displacement measurement shape and bear 2017 (4,000 euros), new core filling car 2017 (22,000 euros)

ID3397 OMAG K1400 year/Baujahr 1997/2004 Block stacking system including hydraulic unit (built in 1997), doppler including hydraulic unit (built in 2004), board destacker and board stacker including roller conveyor, board infeed and board conveyor to the mast, board turner Stone stacking system including hydraulic unit (built in 1997), Doppler including hydraulic unit (built in 2004), board destacker and board stacker including the roller conveyor, board feed and board track to the lifting frame, board turner

ID3398 Trafö-Bleichert year/Baujahr 1983 Mobile platform with support arm adjustment and 180 degree turntable, with motors, without controls Moving platform with support arm adjustment and 180 degree turntable, with motor, without control

Mobile log saw Pezzolato timmber quenn 600 fully hydraulic diesel engine

ID3399 Bundling device horizontal and vertical year/Baujahr 1983/1994 Horizontal and vertical bundling unit, horizontal Ridder (built in 1994), vertical Signode (year of manufacture 1983) Horizontal and vertical strapping, horizontal Ridder (built in 1994), vertical Signode (built in 1983)

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

Key data: 1200 KW, 1600 kVA, 400 V

Jenbacher Gas engine [JMS 416GS] available in dismantled condition. Specifications: - Type: J416 GS - mfy: 2012 - Power: 1222kW - Fuel: Biogas - Frequency: 50Hz - Alternator rating: 1870kva - Major Overhaul done at 30000 and 60000 hours. - Mass: 13550kg - Service Log book and maintenance manual available - Accessories: Control Panel, Gas line, Heat exchanger, pumps.