tri axle used for sale

Size: 0x0 Technical details: Net Weight: 210 kg Measurements: (L x W x H) 152 x 76 x 12 Equipments: Mechanical speed: 300 cycles/hour Automatic Registration Mark Sensing 4-Sided Precision Trimming Dynamic Variable Formatting Delicate Media Compatibility Intuitive Control System Operation Mode: Semi-automatic/Automatic sheet feeding with sensor-driven alignment. Maximum Sheet Size (Width or Length): 74.93 cm (29.5 inches). The maximum square sheet size is 61.1 × 61.1 cm (24 × 24 inches). Minimum Sheet Size: 20.32 × 20.32 cm (8 × 8 inches). Maximum Diagonal Capability: Untrimmed raw sheet: up to 86.36 cm (34 inches)Trimmed finished sheet: up to 81.28 cm (32 inches) Maximum Cover Thickness: Up to 0.5 mm

A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.

turning diameter over bed: 400 mm centre height: 195 mm turning diameter over slide rest: 246 mm turning length: 650 mm spindle turning speed - stepless: 0-2500 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2x1.3x1.6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

Countertop sweeper TRILETY used condition, see pictures Type LKM Sweeping body for Multicar vehicle Year of construction 1998 Dimensions: 330/190/190 cm Negotiation price: € 2.590,- net Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Biomass CHP Boiler Plant – 5.4 MW Thermal and 995 kWe Turbine Capacity A lightly operated, complete biomass CHP boiler plant featuring a 9.5 MW bubbling fluidized bed boiler (BFB), designed for wood-based fuels. The plant includes a back-pressure steam turbine and a heat exchanger for hot water production from back-pressure steam. The plant was built by Estonian Filter Solutions, a company highly experienced in steam boiler plant engineering and EPC contracting. The BFB steam boiler was delivered by Vapor Boilers Finland. The steam turbine was manufactured by Triveni Turbines (India), in combination with a generator and controls from ABB. Other key equipment includes KSB pumps, conveyors from Technobalt AS, and rotary airlock valves from Rotolok UK. The power plant was commissioned in 2013 and operated at partial load until 2015. The control system, developed by Filter Solutio ...

TRIA GRANULATOR, (machine offered totally reconditioned - photos taken before reconditioning), Series 80-49 DN Rotor width 800 mm. diam.450 mm. 45 kw motor Granulation chamber 840 x 490 mm. Complete with conveyor belt Feeding hopper N.3 screens available (9-15 mm) Control panel The machine is offered TOTALLY RECONDITIONED, See how we recondition [HERE](.germanplast.eu/pages/photo-gallery), INSTALLED POWER: 45 kw, rotor size: 800x450 mm.

Inv. Num. : 8526 Type: VC 1110 Producer: Trimill Created: 2005 Parameters: Control system: Heidenhain iTNC 530 Switch-on hours: 16373 h Hours: 14340 h Number of axes: 3 X-axis travel: 1100 mm Y-axis travel: 1000 mm Z-axis travel: 550 mm Machine weight: 16000 kg

turning diameter: 250 mm turning length: 600 mm control: FANUC Series 31i-Model A total power requirement: 23 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 2.880 x 2.130 x 1.990 mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: TRIMILL Model: VC 2314 Configuration: 3-axis CNC Control System: Heidenhain TNC 640 Year of Manufacture: 2024 Find more here - / Contact us at -

We have the following equipment available for sale immediately. Two FRANCE TRANSFO SCHNEIDER ELECTRIC 1250 kva and 850 kva cast resin dry type voltage converter. years of construction 2003. Transformers they have hood which has been dismantled to facilitate extraction which are available in our warehouse

We offer for sale a copper cable crushing and separation line consisting of the following components: 1. VOTECS Machine - Model: EZ 611 - Manufacturer: Votecs - Rated Voltage (Nennsp): 400 V - Control Voltage (Steuersp): 230 V - Hydraulic Pressure: 160 bar - Year of Manufacture: 09/2007 - Rated Current: 38 A - Fuse: 50 A - Frequency: 50 Hz 2. SIDMA Overband - Type: Magnetic - Model: OVB 5620 - Manufacturer: SIDMA - Weight: 680 kg - Consumption: 1500 W - Residual Induction: 400 Gauss - Width (A): 200 mm - Conveyor Belt Speed: 1.5 m/s - Year of Manufacture: 2016 3. MITECO - Manufacturer: Miteco - Rated Voltage: 400 V - Full Load Current: 127 A - Frequency: 50/60 Hz - Phases: 3 + PE - Short Circuit Rating: 35 kA - Enclosure Type: IP54 - Year of Construction: 2015 - Normative References: IEC 60439-1, EN 60204-1 Find more here - / Contact us at -

CNC vertical machining center Type: VC 1110 Manufacturer: Trimill Year: 2005 Control: Heidenhain iTNC 530 HSCI X: 1100 mm Y: 1000 mm Z: 550 mm Table: 1300 x 1370 mm Max table load: 8000 kg Chip conveyor Machine weight: 16000 kg In good condition, under power Find more here - / Contact us at -

Tip height: 195 mm Center width: 1250 mm large recirculating Ø over bed/support slide: 400/265 mm Spindle Holder/Bore: Camlock D1-6"/54 mm Tailstock quill taper: MK 5 Spindle speeds infinitely variable in 3 groups: 0 - 2500 rpm Feeds longitudinal: 0.018 - 1.2 mm Feed plan: 1/2 of the longitudinal feeds 51 metric thread pitches: 0.2 - 14 mm 56 Inch Thread: 2 - 56 Gg/" 20 module threads: 0.2 - 3.5 module 20 Diametrical Pitch Threads: 8 - 56 DP electr. Connection: 400 V, 7.5 kW Weight: 1500 kg Space requirement: 2500 x 1300 x 1300 mm

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

De TVM 302 ( meetbereik ~320 mm / ~12 inch) heeft de volgende typische specificaties: Meetbereik: 320 mm (12 inch) Maximaal toegestane fout: 0,02 mm Herhaalbaarheid (2 s): 0,005 mm Frontale vierkantheidsafwijking: 0,02 mm Resolutie: 0,01 mm / 0,001 mm (of in inches .0005/.00005) afhankelijk van het beeldscherm Meetkracht : ca. 3 N Maximale verplaatsingssnelheid van de handmatige wagen : 1500 mm/s. Gegevensuitvoer: Opto-RS232. laboaragon.com+1 Bedrijfstemperatuur : +10 °C tot +40 °C; Opslag: -10 °C tot +40 °C. Gewicht (gietijzeren voet): ~6 kg. 4 keer op voorraad

Krones Triblock (rinser, filler and capper) / 20,000 bph / 1.5l The Krones Triblock from 2005 is a high-performance filling line with an output of up to 20,000 bottles per hour in 1.5-litre containers. The machine is designed for the filling of still and carbonated beverages. It processes bottles with 28 mm closures and integrates the process steps of bottle handling, filling and capping in a compact machine design. The system stands for reliable technology and an efficient production process.

Laminator Triplex solventbased  Min. material thickness 12 my , Max. material thickness 120 my, Cylinder width 1300 mm, Material width = 1250 mm, Unwinder and rewinder (turnstile) Roll diameter max 1000 mm, Sleeve 152 mm, Speed (mech.) = 350 m/min

Demonstration machine:Technical data:Grinding width 450 mmmax. Workpiece thickness 125 mmmin. Workpiece thickness 8 mmFeed infinitely variable 2-6 m/minGrinding roller diameter 82 mmSanding belt dimensions 457 x 1003 mmMotor output power 3 kW S6 (2.2kW S1 100% ED)Suction nozzle 100 mmDimensions L x W x H 1030 x 1000 x 1740 mmWeight 215 kg

This 3-axis TRIMILL Speed 1110 was manufactured in 2005. It features X/Y/Z travels of 1100x1000x550 mm and a tool changer with 10 positions. Weighing 16000 kg, this vertical machining centre represents a robust option for precise milling operations. Contact us for more information about this machine.

TRIA GRANULATOR 100-65DN, Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

TRIA type 32-20 / JM granulator / crusher in excellent condition New engine installed last month Year: 2010 Shredding chamber dimensions: 320 x 200 mm Power: 4 kW / 5.5 hp Fixed blades: 2 Rotating blades: 3 Rotor diameter: 180 mm Hourly shredding capacity: 40 to 60 kg

Used Used Filling Triblock Bertolaso 12.12.1: Year: 2006 Condition: Good Used Filling Triblock Bertolaso 12.12.1: Model: Minibloc 12/12/1 Year: 2006 Product: still wine Speed: 2500 BPH Direction of travel: clockwise Rinser 12 clamps Manual carousel height adjustment Fixed nozzle Number of treatments: 1 Type of treatment: water Filler 12 valves Filling type: light depression Valve type: mechanical Vacuum system and inert gas injection before filling Single-head corker Cork: Natural straight cork Head height adjustment: manual Vacuum before corking Gas injection before corking Supported sizes: ? Cork diameter: 22 ?26 mm ? Cork height: 35 ? 50 mm ? Bottle diameter: from 55 ? 120 mm ? Bottle height: from 180 ? 370 mm Machine layout: 1700 mm x 3400 mm Safety protections Code: QT 713 More details: https://bottlingscout.com

Used Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Condition: Good Used Triblock Omar Synphony 6.12.2T.EL: Year: 2015 Speed: 1500 bph Monoblock composed of: Washing bottles Dryer bottles by air blade Capsuling machine with 2 rolling heads for polylaminate caspules. Labelling machine with 3 adhesive station to apply front, back and neck with step-by-step motors Regulation machine by PLC Bottles equipments for cylindrical bottles of 0.75 L Code: EA 87 More details: https://bottlingscout.com

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Unused Complete Outlet Triclamp including Outlet Pipe + Sleeves + Impellors Tetra Pak BM618 / BM714 Bactofuge, Machine unit number or subassembly description: 562012-03 according outlet device drawing., Type of Machine: Complete outlet

Hopper 5.5 liters / double for dosing machine Edhard Neuâ Product descriptionâœ" Manufacturer: Edhardâœ" Material: Lexan, BPA-freeâœ" Condition: Newâœ" Volume: 5.5 litersâœ" Version: double (for 2 nozzles)âœ" Color: transparentâœ" Funnel including pump unit for Edhard enginesDetails see pictures. We have a wide range of machines and accessories for bakeries, pastry shops and restaurants. Feel free to contact us or take a look at our other advertisements.

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

General SKU026N542 MakeTria (It) Type400/ELR No.33.0441.85 Mounted on framecheck Main Features Motor15 KW Inlet diameter400 mm Width420 mm Specified Features - Granulator MaterialMild steel Granulatorcheck Rotor width420mm Rotor diameter400mm Open rotorcheck Number of rotor knives3 Number of stator knives:2 With hoppercheck Inlet500x300mm Hinged topcheck Motor15 KW, 380 Volt Information LocationBarneveld With switchgearcheck Floorspace1,9x1,2 m Total height2,2 m Weight1300 kg Extra Specifications- OVERHAULED - Sieves included: 10 mm, 12 mm, 16 mm DiscountGranulatorsTriaDiscountMills > GranulatorsBrand > Tria What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneve ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

Colchester triumph 2500 variable speed for sale. 50” long bed, gap bed, metric, quick change dickson toolpost, 3 jaw chuck, DRO, 6 position carriage stop, rear tool post cross slide. Direct from workshop clearance. Has been tested and seems to run fine in all gears and variable speeds, screw cutting, cross and longitudinal traverse. Moves smoothly along the bed and cross slide .

Rear axle, steering axle -Manufacturer: Linde, rear axle steering axle from front forklift type H30T -Individual components: see photos -Price/Fee: complete -Dimensions: 1140/410/H350 mm -Weight: 105 kg

Model: 5370661880-PGN-UTTO J20/C OIL Application: These axles are often installed in commercial vehicles, construction machinery (such as wheel loaders) or agricultural vehicles Weight: 405 kg each Including: Transport rack Auction-ID: A1-46785-3200

Front axle excavator Zeppelin ZM 15 Number of 766337

Glüh- und Härteöfen Kammeröfen elektrisch Kammeröfen Entwachsen Kammeröfen Umluft Herdwagen elektrisch Laboröfen elektrisch schoenheider Sonderbau-Brennöfen Mess- und Regeltechnik Industrieöfen / Kammeröfen Kammertrockner gemäß DIN 1539 Silikon-Temperöfen Schubladenöfen Truhenöfen Durchlauföfen Burn-In Öfen Wärmebehandlung AMS 2750 E Ex-Trockenschränke Labortrockenschrä nke Vakuumtrockenschränke Umluft-Kammertrockner bis 850°C Kammer-Muffelofen bis 1800°C Elastomerprüfschränke Energieeffiziente Industrieöfen gienanth Unsere Wärmebehandlungsverfahren: Vergüten Härten Anlassen Einsatzhärten Aufkohlen Carbonitrieren Bainitisieren – früher Zwischenstufenvergüten Nitrieren Gas Plasma und weitere Prozesse auf Anfrage. Nitrocarburieren Gas Plasma Salzbad (Tenifer & QPQ) Glühen Diffusionsglühen Normalglühen Spannungsarmglühen Weichglühen Induktionshärte ...

Properties: Manufacturer: Interroll Condition: good (used) Clamping length: 630mm Roll length: 610mm Roll diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailor-made logistics for your intralogistics We are your competent contact for roller conveyors, belt conveyors, schraegfoerderers or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and the local conditions. Take advantage of our long-running experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and ...

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg

Crawler axle, crawler chassis, mini excavator, tracked excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -tensioning cylinder

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Drive from forklift: Still type EFG 1.0 / 5002 -Motor: 24 V -Power: 4 kW -Pole circle: O 270 mm M16 -Dimensions: 740/405 / H375 mm -Weight: 157 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 55 mm -Condition: used -Stroke: 135 mm -Dimensions: 550/160/H120 mm -Weight: 20 kg

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand with screw spindle -Adjustable height: 620 - 980 mm -Quantity: 1 piece available -Dimensions: 510/460/H620 mm -Weight: 25 kg

Support stand, assembly stand, steel stand, welding table, assembly table, work stand, screw stand -Support stand: Steel stand, height adjustable -Design: solid steel construction -Dimensions: 355/280H500 mm -Weight: 19 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 85 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type MRP4DS 400 W 24 V 130 rpm -Dimensions: 610/250/H200 mm -Weight: 20 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 13509 367 W 24 V -Dimensions: 660/360/H250 mm -Weight: 51 kg

Scrubber dryer, floor cleaning machine, mopping machine, gearbox -Manufacturer: Gansow, drive axle with gear motor from scrubber drier 70 BF 70 -Motor: Gansow type 11500 1000 W 24 V -Transmission: Flender ZF 12 -Dimensions: 660/260/H150 mm -Weight: 43 kg

New bellows probably Maho 700 old version

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=120x320 -Dimensions: see photo technical drawing -Number: 1x axle available -Dimensions: Ø 120 x 320 mm -Weight: 25 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=110x550 -Number: 1x axle available -Dimensions: Ø 110 x 550 mm -Weight: 38.9 kg

Travel wheel axle for crane undercarriage, friction wheel, travel wheel for bridge crane, indoor crane, assembly crane, workplace crane -Travel wheel axle: for crane trolley -Type: D=240x545 -Number: 1x axle available -Dimensions: Ø 240 x 545 mm -Weight: 70 kg