tray used for sale

Standard rollers 250mm NEW 1600.900 C Kalmeijer KGM Pastry Forming Roller Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWPorchie number : 1600.900 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1263.920 C Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1263.920 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Moulding Roller Kalmeijer KGM 1600.905 C NEUHeducator : KalmeijerType : KGM 250NEWPordiment number : 1600.905 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer 1613.900 B KGM Biscuit Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorb number : 1613.900 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1612.910 B Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1612.910 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1612.900 Bra Maker : KalmeijerType : KGM 250NEWPorder number : 1612.900 BDedetails see picturePLUS POINTSThe figure roller, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Forming Roller Kalmeijer KGM NEW 1500.915 CHeducator : KalmeijerType : KGM 250NEWPor number : 1500.915 CDedetails see pictureOrder number : Special rollersSee picture for detailsPLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight) 

Kalmeijer KGM 1120.925 A Pastry Forming Roller Standard Rollers 250mm NEW 1120.901 AHmaker : KalmeijerType : KGM 250NEWProduction number : 1120.901 ADedetails see picturePLUS POINTSThe figure roller is heated, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1120.900 AHmaker : KalmeijerType : KGM 250NEWPorder number : 1120.900 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1120.910 AHcreator : KalmeijerType : KGM 250NEWPitem number : 1120.910 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1123.910 AHcreator : KalmeijerType : KGM 250NEWPorchion number : 1123.910 ADedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Description: Serial number 248997- -1 , maximum load per storage level pull-out 25 kg maximum load per storage level shelf 75 kg , Volume of the drip tray 22 l max. largest container volume 20 l Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,900 mm, weight approx.: 250 kg

turning length: 1050 mm turning diameter: 380 mm centre height: 180 mm turning diameter over slide rest: 200 mm quill:: 4 MK quill stroke: 180 mm turning speeds: 33 - 1500 U/min number: 12 Drehz. bed width: 330 mm spindle bore: 52.0 mm adjustment range:: Ober 130 mm adjustment range:: Plan 330 mm tool adaptor: CAMLOCK GR 6 work height max.: 1060 mm total power requirement: 5.5 kW weight of the machine ca.: 1050 kg range L-W-H: 2000 x 850 x 1450 mm good / well-maintained condition () Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9207355 ...

Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable Mains connection 380 volts, 50 Hz - stepless feed in the X- and Z-axis - spindle speed over 2 motor speeds and 8 gear stages - quill displacement on the vertical milling head 60 mm - vertical milling head swivel and 100 mm horizontally extendable - fixed angle table 600 x 210 mm - coolant device in the machine base - adjacent control cabinet - original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition; used

Heating shell with heating base on grated retention tray, 200L unstirred polypropylene reactor fitted with rupture disk and thermocouple well, PID control with thermocouple. Maximum operating temperature 100°C. External dimensions of reactor: H 90cm, diameter 60cm

Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one setup. All known tooth geometries (flat, alternating, trapezoidal tooth, etc.) can be ground automatically and in one pass. Accessories: Handling system for saw blades ND 230 including data input station and 3 loading trolleys Loader ND 230 Full cladding Saw positioning device, Automatic central lubrication, Wet grinding device, Extraction, Halogen lamp, 1 saw blade mounting bolt including magnet holder Oil collecting tray, Circular saw blade diameter without robot: 80 -840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Circular saw bore diameter without robot: from 10 mm, Circular saw bore diameter with robot: with robot from 10 -180 mm , Sheet thickness without robot: up to 14 mm, Sheet thickness without robots: up to ...

x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm table-size: 800 x 400 mm spindle taper: SK 40 spindle turning speed range: 50-2500 U/min Feedrate X-,Y-,Z-Axis: 8-400/8-400/4-200 mm/min total power requirement: 3,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,5 x1,68 m Machine comes from a vocational school - 3-axis digital display HEIDENHAIN - rigid angle table - Coolant device - automatic central lubrication - chip tray - 16 pieces of tool holders - Tool holder carrier - Machine feet - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3048 mm

Ref.Nr. 00810 Name of the plant Bending Center Manufacturer: Salvagnini Model P4 2525 Year of construction 2006 Description according to order confirmation at the time of purchase Scissor table Feeder destacker Bending center Programmable hold-down device Upper bending beam Lower bending tray Control unit Control for auxiliary bending cheeks CLA tool kit Swivel device for auxiliary tools Option for cutting and spreading profiles Dispensing device / buffer for panels Water-air cooling unit Scissor table Maximum dimensions of stackable PCBs 3048x1524mm Maximum height of stackable package incl. pallet 350 mm Usable load capacity 5000 kg Vertical lifting distance 550mm RVA - Feeder-Destacker Max. dimensions of metal sheet 3048x1524mm

General SKU354U1319 LocationBarneveld MakeWerner Mathis TypeLTE 53801 Year of construction2000 Main Features MaterialStainless steel Max.temp.250 °C Specified Features - Drying oven Drying ovencheck Max. temperatureUp to 250°C Number of compartments:1 CapacitySample size max 33x43 cm Electric heating7.2 kW Electric capacity9 kW With fancheck With infra-redcheck MaterialStainless steel Information Mounted on framecheck With switchgearcheck Total height1,60 m Weight400 kg CEcheck Floorspace1,20 x 0,90 m Extra Specifications- sample tray is missingDrying ovensWerner Mathis AGDryers > Drying ovensBrand > Werner Mathis AG What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

Professional packaging system from a renowned German manufacturer. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. -Automatic welding frame movement by manual release. -Roller holder and product tray adjustable. -Height adjustment of the conveyor belt via hand crank. -Tunnel opening approx. 550 x 300 mm. -Hot air flows in the tunnel mechanically adjustable. -Maximum package dimensions approximately: 550 mm x 300 mm. -Maximum film roll width approx. 600 mm. -Perforation of the foil possible via 2 adjustable needle rings. -Machine with castors movable and lockable. -400 V / 7 KW. Setting options on the display: -Tunnel temperature. -Welding time. -Transport time of the conveyor belt. -Transport speed of the roller chain. Dimensions set-up approximately: length 2.5 x width 1.1 x he ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum film ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Professional automatic packaging system from a renowned European manufacturer consisting of two components, each with separate controls. The machines can therefore be operated together or individually. Suitable, for example, for packaging foodstuffs, technical articles, printing and paper products, household goods, toys and textiles. Automatic angle welder Smipack FP 560 A: -Automatic welding frame movement. -Automatic residual foil winding. -Automatic product ejection through the outfeed conveyor. -Start the process manually via hand button or foot switch. Alternatively, automatic process start is possible by entering a time interval on the display. -Conveyor belt infinitely adjustable in height via hand crank. -Welded frame approx. 580 x 420 mm. -Welded frame movement electromotive. -Water-cooled welding unit (closed system). -Maximum film roll diameter 300 mm. -Maximum fi ...

Vertical machining center, Manufacturer: AXA, Type: VSC 0-1600M, Year of manufacture: 1992, Read operating hours (h): 20,835, Serial No.: 85 237, Connected loads: 380 V/ 50 Hz, Travel X/Y/Z: 1,600/300/300 mm, Power: 20 kW, T-slot clamping table approx. 180x45 cm, 20-fold tool changer, 1 mobile chip tray, paper filter system, control HEIDENHAIN, 1 lot of tool holders, approx. 17 pieces, equipped with: drills/milling cutters, various milling cutters/drills, in stock in table frame, 1 work table, 1 base cabinet 1-door/1-speed, 1 wall unit 2-door, with remaining contents, pick-up: by arrangement on 13 or 14.06.2024

Manufacturer : Merk Process (Bucher) Model: Drycab VDC (Vacuum dryer cabinet) Type: vacuum tray dryer Year : 2008 Application :? dry and process different heat-sensitive products for the food and pharmaceutical industry. Documentation available A - Vacuum dryer cabinet Cabinet volume: 656 L Pressure: - 1 / 0 Barg Permissible temperature: 200?C Heating jacket: 2 X 20 L Pressure: 5 barg Permissible temperature: 250?C Materials: 304 stainless steel Equipment: temperature sensor, pressure sensor, regulated valve, etc. B - Condenser Type: tubular exchanger Volume 1: 10.7 L Pressure: -1 / 3 Barg Permissible temperature: 100?C Volume 2: 21.7 L Pressure: 0 / 8 barg Temperature range: 25?C Materials: 304 stainless steel C - Vacuum pump Manufacturer: Elmo Rietschle Type: rotary vane vacuum pump D - Temperature regulator Ma ...

Manufacturer: Usifroid Usifroid Reference : SMJ 100 FPI Type : freeze dryer Number of trays : 2 Surface area per tray : 100 cm x 50 cm 2 air compressors 1 refrigeration unit : R22 and 502 1 circulation pump 1 heating system Missing parts : Hydraulic unit Vacuum pump

Manufacturer: ELF Year : 1989 Equipment modified several times by the manufacturer Stoppil Number of heads : 6 adjustable units Type of products : Liquid / semi-liquid Type of packaging : Cans, bottles, jars, etc. Operation: pneumatic Filling: gravitational Stainless steel hopper + level sensor Raise/lower cylinder Drip tray Conveyor Product stop cylinders Electrical cabinet Flexible feed hose with valve Variable speed drive for 2 feed pumps. Omron PLC

Manufacturer : Stoppil Model: EC6050 Type : Automatic linear filler   Number of heads : 6 Product : Liquid or semi-liquid Capacity : 500 ml / 5 L Flowmeters : electromagnetic Tank : 316 stainless steel Poppet valve   Cylinders: inlet / outlet Drip tray Conveyor 1 additional set of heads Documentation available

Description: Serial Number: 8809/173/A632 Machine for cutting large sheets and all types of materials, mainly iron and stainless steel. Possibility of programming the size of the cut Two tables to support the pieces Tray for cut pieces and light Cutting Lenght: 2000 mm Max. thickness of cut: 4.5mm Dimension control by pulse generators Electric brake , Memory capacity: 255 programmes on a single line 2 programmes of 100 lines , 1 program of 56 lines Auxiliary function: 'M' 0-9 Auxiliary function 'G '0-9 Installed power: 20 W , weight approx.: 3,500 kg, Approx. Onsite Dimension. (l x w x h): 5,000 x 2,700 x 1,500 mm

Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors

Description: Machine number ,A 0207009 Power output 3.7 kW With approx. 50 tray trolleys, different versions matching the system without CE certificate Approx. Onsite Dimension. (l x w x h): 15,000 x 7,000 x 3,000 mm, weight approx.: 8,000 kg

Used Shrink Wrapper Dimac Star F45 PACKAGING MACHINE Constructeur DIMAC Model Star F45 n A40 1462 Year of construction 2004 Parcel speed per minute max 45 Type of film 40 or 50 microns film Tray presence no Type de fonctionnement Possibility of imprimed film travailler Machine inlet type right or 90 right Divider bottles yes Hours worked 16452 12 07 Last revision Spare parts yes PLC manufacturer and model B R Voltage 400 V 50 Hz Manuals available all Security protections yes Machines still in operation yes Availability November 2017 Currently processed formats 1 5l x 6 1l x 6 0 5l x 6 Dimensions encombrement machine 11 m x 1 35 m [...for more information send your inquiry to the seller.] refno: FA23

Fat baking device / fat baking station Model: Primus 2/48 Super W Automatic reversing with timer control 2 baskets for max. 48 pieces Lifting device, removal device Manual Proofer with 10 ALU tilting troughs Temperature controller with safety thermostat Steam lid, drip tray Output approx. 480 pieces/hour Stainless steel version, mobile Connection 400V, 7.5 kW, 16A-CEE plug Dimensions: 1300/2100 x 815 x 1335 mm, WxDxH Used equipment cleaned and inspected with 3 months warranty Many more TOP fat baking devices in stock!

Baking floor Model Forno 246 Modular deck oven for trays 2 x 40/60 - 1 x 60/80 Program control with night start Stove dimensions inside: 650x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 5.4 kW, 16A-CEE plug Dimensions: 985 x 1275 x 470 mm, WxDxH (floor) New device 24-month warranty on spare parts Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray You can find many more ovens here!

Baking floor Model Forno 446 Modular deck oven for trays 4 x 40/60 - 2 x 60/80 Program control with night start Stove dimensions inside: 1250x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 8 kW, 16A-CEE plug Dimensions: 1555 x 1275 x 470 mm, WxDxH (floor) Weight 240 kg (floor) New device 24 months warranty Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray We have a wide range of deck ovens!

Table-top CNC milling machine ADF 3040mini One-piece frame made of polymer concrete The design is a monobloc with a moving aluminum table. Working area with noise and dust protection • Processing zone X, Y, mm - 300400 • Z axis stroke, mm - 100 • Workpiece fixation – Mechanical • The material of the table covering is aluminum D16T • Feeder mechanisms – 1605-X, Y, 1204-Z • Positioning accuracy, mm – 0.05 • Spindle – 1.5 kW air cooling • Spindle revolutions, rpm - up to 24,000 • Collet type – ER 11 • DDCS V3.1 controller • Drive of linear movements - power stepper Nema23 motor • Power supply, V - 220 • Term of warranty service, month – 12 • Non-contact inductive sensors on all axes • Tool height sensor LED - illumination of the working area Tray for collecting shavings Built-in control cabinet Hermetic processing area  ...

Shelving trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Shelf trolley: with 6 levels. Writing tray and filing wall -3 levels: with wooden insert -Chassis: 4 swivel castors, with brakes -Total dimensions: 1260/430/H2110 mm -Weight: 93 kg

Autoboard TMZ, type QW 161, built in 2000 with stripping station and parcel tray Many spare parts available, grab carts, opener rods, chains, gripper bodies and other small parts. Can be viewed in production ,runs flawlessly. Delivery conditions -> From location (dismantling and removal by buyer)

Description: Serial number: 231023, Operating hours according to operating hours counter: 1 x 872 h, 1 x 178 h, 400 V, 50 Hz, 3 phases, Power: 20 kW, 12,000 rpm, Machine weight: 8,000 kg, 6 bar Dimensions LxWxH: V110Y-12 = 3300 x 2300 x 2500 mm IKZ 22bar = 1050 x 950 x 1750 mm 2 side parts = 1600 x 1700 x 400 mm Chip conveyor = 3000 x 600 x 500 mm Coolant tray = 1500 x 1000 x 500 mm Chip trolley = 980 x 800 x 850 mm Incl. documentation, TS460, SE660, holder, cable, TT460 Note: Machine is already in disassembled and transportable condition, see photo material Location: A-3242 Texing weight approx.: 9,000 kg, Approx. Onsite Dimension. (l x w x h): 3,900 x 3,900 x 3,100 mm

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Lot consisting of No. 6 pan carts: Tray dimensions: 800 x 600 mm Trolley height: 1740 mm Approx. Onsite Dimension. (l x w x h): 2,500 x 1,350 x 1,800 mm, weight approx.: 600 kg

Description: No. 2 trolleys Tray size 800 x 600 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 2,000 mm, weight approx.: 60 kg

Description: Lot consisting of No. 4 pan carts: Tray size: 800 x 600 mm , Trolley height: 1740 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 1,700 x 1,800 mm, weight approx.: 300 kg

description: With this special conveyor that adjusts the heights, has its axis of rotation in the middle. You are able to connect for example 4 conveyors with each other. This means: 2 transporters lie on top of each other and have different tasks (for example they serve several packaging-machines or palletizers). With 2 superimposed conveyors the following combinations are possible: From inlet below to outlet below From inlet below to outlet above From inlet above to outlet below From inlet above to outlet above The conveyor height can be variably adjusted. Suitable for many different formats (tray, carton, bag in box, ...) Usable width = 500 mm width: 1500 mm height: 1870 mm length: 5800 mm Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of ...

working area: 860 x 610 mm Product thickness max. (with honeycomb table): 40 mm Laser Source (sealed CO2 Laser, air-cooled: 30 Watt dimensions: 1.365 x 880 x 1010 mm Printer Interface: 2.0 USB For cutting, grooving, perforating and engraving a wide range of materials. The operator selects the corresponding job on the Digicut eco via a four-line display. The adjustments necessary for processing, such as intensity and speed of the laser, are determined in advance by color-specific settings in the printer driver. The user needs a vector-oriented graphics program such as CorelDraw, Adobe Illustrator, etc. Including accessories such as honeycomb table, waste tray, compressor, barcode scanner, operating instructions, software The machine is offered without suction, this is optionally available for an additional charge. There are currently several demonstration machines (Years of construction  ...

Description: Dimensions of containers: 810x600x600 mm Tilt tray dimensions: 1350x730x850 mm Approx. Onsite Dimension. (l x w x h): 1,700 x 1,350 x 850 mm, weight approx.: 197 kg

Description: working width: 1110 mm electric: yes read hours: 0 hours battery charger: yes net weight: 320 kg overall dimensions L: 1400 mm overall dimensions W: 1250 mm overall dimensions H: 1350 mm Description: unused with water spray function anti-dust system lighting battery charger brushes electric down and up electric filter shaker with collection tray Approx. Onsite Dimension. (l x w x h): 1,400 x 1,250 x 1,350 mm, weight approx.: 320 kg

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: TNC 426 / 430M Heidenhain Main spindle:: turning speed range - main spindle: 20 - 9.000 min/-1 power capacity - main spindel: 9 / 13 kW max. Torque: 57 / 82 Nm tool taper: SK 40 swiveling-rotary-table:: table diameter: 700 x 500 mm swivellable: B: 105° (-10°/+95) ° rotatable: C: 360 ° max. table load: 200 kg number of T-slots: 7 T-slot - distance: 63 mm T-slot - width: 14H7 mm center hole: 30H7 mm Tool-Presetter:: number of toolpositions: 16 pos. tool taper: SK 40 max. tool length: 290 mm max. tool weight: 6,0 kg max. total weight: 50 kg feeds:: feed speeds: max. 10.000 mm/min rapid traverse: 12 m/min input unit: 0,01 mm total power requirement: 17 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Documents: Chip-Tray: Coolantsystem: B-axis: man. C-axis: man. Swivel-Rotary-Table: Au ...

Suitable for automatic grinding of all types of tools. Accessories: Software Numrotoplus 3.8.0r, Software Numroto standard milling cutters, Software Numroto complex milling cutter extensions, Software Numroto form milling cutters, Software Numroto multi-spiral, Software Numroto 3D collision monitoring, Software Numroto drills / step drills, Software Numroto differential twist, Software Numroto 3D tool simulation, Automatic grinding wheel changer, Circular grinding axis, Oil collecting tray, Coolant cleaning system, Electrostatic vapor separator DSL, Automatic fire extinguishing system, Pallet loader, Automatic steady rest H70, Automatic fire extinguishing system, Automatic central lubrication, Measuring probe, Pneumatic workpiece clamping, Various grinding wheel holders., X axis travel: 800 mm, Y axis travel: 270 mm, Z-axis travel: 660 mm, B axis travel: 400 °, Rapid traverse: 30/15/30  ...

Suitable for automatic grinding of all types of tools. Accessories: Software Numrotoplus 3.8.0r, Software Numroto standard milling cutters, Software Numroto complex milling cutter extensions, Software Numroto form milling cutters, Software Numroto multi-spiral, Software Numroto 3D collision monitoring, Software Numroto drills / step drills, Software Numroto differential twist, Software Numroto 3D tool simulation, Automatic grinding wheel changer, Circular grinding axis, Oil collecting tray, Pallet loader, Automatic steady rest H70, Automatic fire extinguishing system, Automatic central lubrication, Measuring probe, Pneumatic workpiece clamping, Various grinding wheel holders., X axis travel: 800 mm, Y axis travel: 270 mm, Z-axis travel: 660 mm, B axis travel: 400 °, Rapid traverse: 30/15/30 m/min, Workpiece mount: ISO 50, Tool holder cone: ISO 50, Grinding spindle drive power: 12 kW, Gr ...