tray used for sale

This SAMAG TFZ 2L-1000 Drilling machine was made in 2015 in Germany and has 13585 production hours. It is equipped with a HEIDENHAIN control unit. It has a NC rotary table B-axis with 1100x1100mm (7t) and an a-axis as drilling and milling unit with swivel range -30/+15°. The machine has a reinforced main spindle drive with spindle speed 6000 rpm. As additional equipment it comes with tool changer for ISO 40, low-maintenance oil mist extraction system, traveling support steady rests for drilling diameters up to 25.5mm, drip tray with step grate for X-axis 1600mm and rinsing gun.

Manitou RT 2540 telescopic stalker, total weight 17.165 KG, with work basket, with pallet fork, with ditch cleaning tray, lifting capacity 4000Kg, TOP condition

1) Manual sealing machine, make Miveg, type MT325, Incl. power cable yellow + variable roll holder, (fixing boxes left/right), for external GN dimensions 325 x 265 mm (1/2 GN),, existing format: 2 x 1/4 GN,, max. roll width 325 mm; diameter 200 mm max., Net weight: 30 kg, 2) Mobile table, Stainless steel, with parking brake, height adjustable: from 715 - 915 mm,, height grid 4 x 50 mm,, width: 445 mm, depth: 530 mm,, with a storage compartment of 280 – 480 mm., Table tray for MT325 table, Stainless steel, right or left, Width: 350mm Depth: 530mm Height: 240mm, Height offset at the table: 85 mm, attach on both sides, Devices were used for about 1.5 years., Existing format: 2 x 1/4GN,, Existing format: 2 x 1/4GN,

Usable length: approx. 2,300 mm, usable width: approx. 105 mm, with built-in drip tray, Hinge plates made of plastic, side guides: height: approx. 80 mm, adjustable in the Width from 50 - 250 mm, drive not adjustable, manual or automatic operation possible,, can promote in 2 directions.

Used filling and packaging line for delicatessen products, In use for mayonnaise, 500 g - jars,, Output: up to a maximum of 170 glasses/minute, consisting of:, OSMEKA - empty glass - depalletizing, pit design, year 2004, Output: 2 layers / minute,, buffer table with separation,, Turning and blowing machine, make Engler, year 2001, Output: max. 170 glasses/min,, Piston filling machine, make Engler, year 1998, Output: up to max. 200 glasses/min,, SAFELINE (METTLER TOLEDO99 metal detector, Drying tunnel, make ACI, Dri-Line Series, CLEVER sleever + shrink tunnel, LANGGUTH labeling machine, type E212/R-235, year 2000, Output: up to max. 170 glasses/min,, MR labeling technology, seal labelling, year 1998, Output: up to max. 200 glasses/min,, MEYPACK tray packer, year 1996, with foil wrapping machine + shrink tunnel, Output: 14,400 glasses / h - 20 cycles per minute

turning length: 700 mm turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm number of spindle speeds: 35 - 3000 U/min. turning speeds: 4 Stk. spindle bore: Ø 50.0 mm quill stroke: 120 mm bed width: 260 mm tailstock quill taper MT: MK 3 spindle taper: DIN 55029 / GR 5 feeds - longitudinal: 0,045 - 0,787 mm/U feeds - cross: 0,023 - 0,406 mm/U voltage: 380 V total power requirement: 5.3 kW weight of the machine ca.: 755 kg range L-W-H: 1650 x 1060 x 1635 mm Machine from a vocational school (NL) very well-maintained condition () Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 20 ...

turning length: 700 mm turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm number of spindle speeds: 35 - 3000 U/min. turning speeds: 4 Stk. spindle bore: Ø 50.0 mm quill stroke: 120 mm bed width: 260 mm tailstock quill taper MT: MK 3 spindle taper: DIN 55029 / GR 5 feeds - longitudinal: 0,045 - 0,787 mm/U feeds - cross: 0,023 - 0,406 mm/U voltage: 380 V total power requirement: 5.3 kW weight of the machine ca.: 755 kg range L-W-H: 1650 x 1060 x 1635 mm Machine from a vocational school (NL) very well-maintained condition () Furnishing: - robust lead and pull spindle lathe - Guideways, gears and quill hardened and ground - Electromechanical spindle brake - Diagonally ribbed, induction hardened machine bed - Infinitely variable speed control/constant cutting speed - digital speed display - EMCO digital display - mounted on the bed carriage - EMCO 3-jaw chuck Ø 20 ...

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm turning speeds: 60 - 1900 / 9.5 - 1.200 U/min table:: 600 x 250 mm spindle taper: MK 4 // 20 x 2 feed range: ~ 10 - 500 mm/min total power requirement: 1.5 kW weight of the machine ca.: 750 kg range L-W-H: 1250 x 1200 x 1800 mm from a training workshop (BOSCH) maintained condition () Furnishing: - electro-motoric universal milling machine - conventional - easy to use - electro-motor feeds: X and Z axis - manual feed via handwheel: Y axis - robust work table with 5x T-slots - rotatable vertical milling head (SN 5287) - vertical & horizontal work spindle (without counterholder) - separate control cabinet - Coolant system with chip collection tray - Machine light (retrofitted) - EMERGENCY stop button (retrofitted) - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9131207 The data  ...

Inserter FRANCOTYP-POSTALIA FPi 5600, 2 feeders, envelopes approx. 4000 letters per hour, fold type: single, double, parallel, Z and fold, vertical tape tray

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 V total power requirement: 1,5 kW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional lathe 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system feed protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Treatment unit KAVO Primus 1058 Life S, swingarm module equipped with light turbine device, kit tray holder for 2 standard trays, multifunctional foot control for patient chair, occupancy quiver left to right syringe/ ZEG/ LT/ LM/ EMPTY, swivel dish manually, treatment light, amalgam-free, with DÜRR CS 1 Combi-Sepamatic separator, cover midnight blue optically no cracks, function-tested, purchased 11/2020 for 23.944 EUR net

Biscuit Moulding Roller Kalmeijer KGM 250mm NEW 1100.940 CHmaker : KalmeijerType : KGM 250Order number : 1100.940 CDedetails see picturePLUS pointsHeating of the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little spaceRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Moulding Roller Kalmeijer KGM NEW 1120.931 AHmaker : KalmeijerType : KGM 250NEWPor number : 1120.931 ADedetails see picturePLUS pointsHeating of the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Moulding Roller Kalmeijer KGM NEW 1383.912 AHmaker : KalmeijerType : KGM 250NEWPross number : 1383.912 ADedetails see picturePLUS pointsHeating of the figure roller, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller Standard Rollers 250mm NEW Maker : KalmeijerType : KGM 250Width 47mm Thickness 9mmOrder number : 1270.900 CDedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little spaceRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller Standard Rollers 250mm NEW 1383.919 CKalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : Kalmeijer Type : KGM 250Order number : 1383.919 CDedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little spaceRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the correct weight

Standard rollers NEW 1120.919 C Kalmeijer KGM Pastry Forming Roller Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWProduction number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little spaceRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight

Kalmeijer KGM Pastry Moulding Roller Standard Rollers 250mm NEW Maker : KalmeijerType : KGM 250Order number : 1100.935 CDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little spaceRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1501.920 B Pastry Forming Roller Standard Rollers NEUHeducator : KalmeijerType : KGM 250NEWorder number : 1501.920 BDedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

1502.930 B Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWPorchid number : 1502.930 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1263.900 B NEUHeducator : KalmeijerType : KGM 250NEWPorder number : 1263.900 BDedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1263.930 Bra Maker : KalmeijerType : KGM 250NEWPitem number : 1263.930 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1291.910 B Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1291.910 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

1100.910 B Kalmeijer KGM Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchid number : 1100.910 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

We have all the Pastry Mould Roller from KGM 250 in stockKGM Pastry Mould Roller Standard Rollers 250mm NEWComber : KalmeijerType : KGM 250NEWPorb number : 1120.920 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Standard rollers 250mm NEW 1600.900 C Kalmeijer KGM Pastry Forming Roller Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mm NEW Manufacturer : KalmeijerType : KGM 250NEWPorchie number : 1600.900 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1263.920 C Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1263.920 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Moulding Roller Kalmeijer KGM 1600.905 C NEUHeducator : KalmeijerType : KGM 250NEWPordiment number : 1600.905 CDedetails see pictureOrder number : Special rollersDetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer 1613.900 B KGM Biscuit Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorb number : 1613.900 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1612.910 B Pastry Forming RollerManufacturer : KalmeijerType : KGM 250NEWPorchion number : 1612.910 BDedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1612.900 Bra Maker : KalmeijerType : KGM 250NEWPorder number : 1612.900 BDedetails see picturePLUS POINTSThe figure roller, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Biscuit Forming Roller Kalmeijer KGM NEW 1500.915 CHeducator : KalmeijerType : KGM 250NEWPor number : 1500.915 CDedetails see pictureOrder number : Special rollersSee picture for detailsPLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight) 

Kalmeijer KGM 1120.925 A Pastry Forming Roller Standard Rollers 250mm NEW 1120.901 AHmaker : KalmeijerType : KGM 250NEWProduction number : 1120.901 ADedetails see picturePLUS POINTSThe figure roller is heated, do not sprinkle flour and thus better bakingChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1120.900 AHmaker : KalmeijerType : KGM 250NEWPorder number : 1120.900 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1120.910 AHcreator : KalmeijerType : KGM 250NEWPitem number : 1120.910 ADedetails see picturePLUS POINTSThe figure roller heats up, does not sprinkle flour and thus better baking styleChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM Pastry Moulding Roller 1123.910 AHcreator : KalmeijerType : KGM 250NEWPorchion number : 1123.910 ADedetails see picturePLUS POINTSThe figure roller heats up, do not sprinkle flour and thus improves the baking methodChanging the figure roller without tools within one minuteBaking tray transport can be folded down, takes up little space. Kalmeijer KGM Pastry Forming Roller Standard Rollers 250mmRemovable dough feed roller, so easy to cleanAdjustable thickness of the dough figures (for the right weight)

Description: Serial number 248997- -1 , maximum load per storage level pull-out 25 kg maximum load per storage level shelf 75 kg , Volume of the drip tray 22 l max. largest container volume 20 l Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,900 mm, weight approx.: 250 kg

turning length: 1050 mm turning diameter: 380 mm centre height: 180 mm turning diameter over slide rest: 200 mm quill:: 4 MK quill stroke: 180 mm turning speeds: 33 - 1500 U/min number: 12 Drehz. bed width: 330 mm spindle bore: 52.0 mm adjustment range:: Ober 130 mm adjustment range:: Plan 330 mm tool adaptor: CAMLOCK GR 6 work height max.: 1060 mm total power requirement: 5.5 kW weight of the machine ca.: 1050 kg range L-W-H: 2000 x 850 x 1450 mm good / well-maintained condition () Furnishing: - 3-jaw chuck Ø 200 mm (CAMLOCK GR 6) - MULTIFIX steel holder, with 4x inserts - robust, movable tailstock - rotating center punch tips - Food key - various other accessories - Coolant device - removable chip tray - rear splash guard - Connection cable + plug - Emergency stop button - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9207355 ...

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill holder MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.56 m weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,560 mm

Description: Longitudinal and transverse feed. 3-jaw chuck 160 mm. 4-jaw chuck 160 mm. faceplate 4-way steel holder with 4 pcs tool holders 2 pcs. bezels Machine light Drip tray Hardened bed tracks. Emergency stop switch. Feed protection Set of wheels. Machine tools. Turning diameter over bed 290 mm Turning diameter over support 170 mm Turning length 750 mm Speed 75 - 2000 rpm Center height 145 mm Spindle bore 38 mm Tailstock quill mount MK 3 MK Tailstock quill stroke 80 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.34 t Space requirement approx. 1.3 x 0.75 x 0.7 m Approx. Onsite Dimension. (l x w x h): 1,300 x 750 x 700 mm, weight approx.: 340 kg

Description: Center lathe and spindle lathe: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Face plate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools Turning diameter over bed 320 mm Turning diameter over support 220 mm Turning length 600 mm Turning diameter in the crank 320 mm Speed 60 - 1650 rpm Center height 160 mm Spindle bore 38 mm Tailstock quill holder MT 3 MT Connection voltage 400 V Total power requirement 1.1 kW weight approx.: 340 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 750 x 700 mm

Description: Professional lathe 3-jaw chuck 4-jaw chuck faceplate Bezel fixed Bezel rotating Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 50 mm Tailstock quill mount MK 3 Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 0.29 t Space requirement approx. 2.0 x 0.8 x 1.56 m weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,560 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools Turning diameter over bed 400 mm Turning diameter over support 264 mm Turning length 1000 mm Turning diameter in the offset 550 mm Speed 44 - 2000 rpm Center height 200 mm Spindle bore 52 mm Tailstock quill mount MK 4 MK Connection voltage 400 V Total power requirement 1.5 / 2.4 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.56 m weight approx.: 900 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 800 x 1,560 mm

Description: 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool Turning diameter over bed 400 mm Turning diameter over support 280 mm Turning length 1000 mm Speed 70 - 2000 rpm Center height 195 mm Spindle bore 54 mm Connection voltage 400 V Total power requirement 2.2 kW Machine weight approx. 0.85 t Space requirement approx. 1.95 x 1.0 x 1.75 m weight approx.: 850 kg, Approx. Onsite Dimension. (l x w x h): 1,950 x 1,000 x 1,750 mm

Description: 2-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. Turning diameter over bed 250 mm Turning diameter over support 145 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 0.135 t Space requirement approx. 1.3 x 0.65 x 0.6 m Approx. Onsite Dimension. (l x w x h): 1,300 x 660 x 600 mm, weight approx.: 160 kg

Description: Table lathes with drilling and milling unit - 3-axis LCD digital display system - Longitudinal feed. - 3-jaw chuck 125 mm. - 4-way steel holder. - Chip tray, bulkhead - Hardened bed tracks. - Emergency stop switch - Lining protection drilling and milling unit incl. - Quick chuck 1-16mm - Tightening spindle for milling tools - Lining protection - Emergency stop switch - Tool box, instruction manual. Turning diameter over bed 250 mm Turning diameter over support 145 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MK 2 MK Connection voltage 230 V Drilling capacity in steel 16 mm Projection 169 mm Quill stroke 50 mm Speed range - drilling 50 - 2250 rpm Spindle motor 0.5 kW Total power requirement 0.75 kW Machine weight approx. 0.175 t Space requirement approx. 1.3 x 0.65 x 1.3 Approx. Onsite Dimension. (l x w x h): 1,30 ...

Description: Professional lathe digital display 3-jaw chuck 4-jaw chuck faceplate bezel fixed running bezel Quick-change steel holder with 4 cassettes Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools Revolving center point Turning diameter over bed 320 mm Turning diameter over support 200 mm Turning length 900 mm Speed 75 - 2000 rpm Center height 160 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.5 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,560 mm

Description: Benchtop lathe with base cabinet 2-axis LCD digital display system Longitudinalfeed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Turning diameter over bed 250 mm Turning diameter over support 140 mm Turning length 550 mm Speed 50 - 2000 rpm Center height 125 mm Spindle bore 26 mm Tailstock quill holder MT 2 MT Tailstock quill stroke 65 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 0.15 t Space requirement approx. 1.3 x 0.6 x 0.65 m Approx. Onsite Dimension. (l x w x h): 1,300 x 600 x 600 mm, weight approx.: 150 kg

Description: Center lathe - 3-jaw chuck 210mm - Multifix steel holder - Coolant pump - Chip protection wall - chip tray - Machine light Turning diameter over bed 400 mm Turning diameter over support 220 mm Turning length 1000 mm Speed 31.5 - 1400 rpm Center height 205 mm Spindle bore 50 mm Total power requirement 5.0 kW Machine weight approx. 1.4 t Space requirement approx. 2.5 x 1.2 x 1.7 m weight approx.: 1,400 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,200 x 1,700 mm

Description: Professional industrial machine (230Volt) 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools Turning diameter over bed 360 mm Turning diameter over support 220 mm Turning length 1000 mm Turning diameter in the offset 380 mm Speed 70 - 2000 rpm Center height 180 mm Spindle bore 50 mm Tailstock quill holder MK 3 MK Connection voltage 230 V Total power requirement 1.8 kW Machine weight approx. 0.65 t Space requirement approx. 2.0 x 0.8 x 1.56 m weight approx.: 650 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 1,560 mm