tray used for sale

Bale size: 600 mm H (variable) × 600 mm W × 400 mm D Bale weight: 15–30 kg Pressing time: 35 seconds Pressing force: up to 8 tons Dimensions: 2500 mm H × 765 mm W × 575 mm D Integrated bale ejection mechanism Hinged door Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Weight: 415 kg Noise: 70 decibels DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification Made in EU OPTIONS Collecting tray for residual liquid Suitable for use at sea Electronic weighing system Annual maintenance contract Solar powered Galvanized or stainless steel V5HD PRESS FOR CANS & BOTTLES Fast, efficient and easy to use: The V5HD effortlessly presses aluminium cans and PET bottles to make them easier to dispose of. Recommended for restaurants, pubs, bars and special recyclers. Hinged door and 35-second pressing time Integrated bale ejection mechan ...

CP30 PRESS FOR CANS AND OIL FILTERS With its compact design and a pressing force of 8 tons, the CP30 efficiently presses metal cans and large oil filters up to a size of 30 liters. Recommended for car repair shops, paint shops and food manufacturers. Pressing force of 8 tons Low voltage control and emergency stop knob for safe working Easy removal of cans after pressing and drip tray for residual liquid SPECIFICATIONS Dimensions with stand: 2540 mm H × 1105 mm W × 680 mm D Dimensions without stand: 1435 mm H × 615 mm W × 680 mm D Dimensions of the pressing chamber: 475 mm H × 350 mm W × 350 mm D Weight: 245 kg Pressing time: 35 seconds Pressing force: up to 8 tons Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels IP54 protection class CE Certification Made in EU OPTIONS Savings model Suitable for use at sea Galvanized or stainl ...

EMA high-frequency welder with chiller EMA High Frequency Welding Machine MFA with Thermotec PT2000 water cooling system Range of welding machine 0 - 1000 ° C MF Output: 80A Frequency MF-Gen.: 10 KHz Mains connection: 380V 106 A Foot pedal Water cooling, chiller Thermotec PT2000 Dimensions approx. L1500x W730x H1900mm Volume 1730 Ltr. YEAR: 2004 The drip tray is not included in the scope of delivery.

Liquidation of German industrial meat grinder, built entirely in stainless steel. Manufactured by Melior. Its condition is second-hand, very robust and of high quality. Equipment overhauled in its entirety (re-release) guaranteed. Characteristics: - Construction: entirely in stainless steel. - Mouth diameter: 114 mm - Cutting system: Unger 114 (single) -Engines: III: 400V, 50Hz, 10A, 5Hp, Kw3.7. - Production: +- 1100-1400 kg/h - Transmission: oil-bathed gears - Tray dimensions: 610 mm x 860 mm x 130 mm high. - Overall dimensions: 650 mm x 900 mm x 1300 mm high. Meat mincer, meat grinder, industrial mincer, butcher mincer, meat machinery. Its condition is excellent re-release. Equipment reviewed and guaranteed.

x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm tool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/min feeds: 0 - 2000 mm/min quill stroke: 60,0 mm table-size: 650 x 350 mm T-slots: 14 H7 Control: TNC 124 engine output: 5,5 kW weight: 1800 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros () Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel The data for ...

LIQUIDATION of thermoforming packaging machine completely rebuilt and revised in its entirety re-release. Manufacturer: CFS- KRAMER GREBE- TIROMAT, model: 2500/320. Construction aspects: Built in stainless steel materials. EC type-approval. Hygienic design, IP-62. Ease of use and maintenance: High performance. Quick format change, no tools. Operating programs. Programmable feed speed. Minimal maintenance. Vacuum pump 250 m3/H. Dimensions of the tray to be formed (format): 280 mm x 220 mm. Overall dimensions: 5700 mm long x 900 mm wide x 1920 mm high. Suction device for excess film. Electrical power. 380v, 50HZ, 25-35A,

The Swiftcheck is designed to feed and count any size, shape or quantity of tablets without change parts, and is the ideal unit to serve as a line monitoring machine to check the count accuracy of filled containers from the packing line. The system is simple to operate and easy to clean. Technical data: Length: mm 575 Width: mm 200 Height: mm 600 Designed for ease of operation and simple setting, the Swiftcheck incorporates a similar microprocessor package to that used on the high speed counting machines, achieving the same high level of accuracy and reliability. The basic unit comprises a stainless steel cabinet with integral micro processor control system, 5 litre product hopper and vibrator feed arrangement with variable vibration control, quick release twin-track feed tray and contact parts, stainless steel outlet funnel and clear plastic dust cover.

digital printing machine Manufacturer: Canon Model: Image Press C6010 Prisma Fieryy Controller H350 Fiery Impose / Compose X-Rite i1, Process CON BUN Duplux Color Imager Reader Unit Auto gradation sensor Stack bypass-C1 Stack Bypass Alignment Tray-D1 POD-Dek Lite POD deck Lite Attachment Kit Upright control panel Booklet Finisher W1PRO Plus high pile addition Counter: 2,675,129 Available immediately Maintenance due because the machine is a maintenance contract Otherwise everything is OK Location: germany Price: on request

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 300 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 470 mm Travel of the upper slide: 400 mm Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18.0 mm/min up to: 800 mm/min transversal from: 18.0 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.5 m/min transversal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 6.0 HP Machine´s weight about: 1900 kg Overall dimensions machine: Length: 2000 mm Width: 1600 mm Height: 1700 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: Mitutoyo Coolant system La ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 250 mm Longitudinal travel (X-axis): 330 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 475 mm Spindle speeds: number (steps): 12 from: 63 rpm up to: 2800 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 4 mm/min up to: 500 mm/min vertical from: 2 mm/min up to: 200 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.2 HP Machine´s weight about: 950 kg Overall dimensions machine: Length: 1600 mm Width: 1100 mm Height: 1650 mm Various accessories: Positionier- und Streckensteuerung Digital readout number of axis:: 3 Manufacturer: ELESTA Coolant system Lamp Chip tray

Item no. 5032: 1 gebr. Universal tool milling machine Fabr. DECKEL, type FP 2 active, Bauj. 1981 with 3-axis active digital display Heidenhain Arb.-Ber.: 400 x 220 x 400 mm, drive power: 2 kW Accessories: Rigid table 700 x 330 mm Foldable splash guard cover with chip trap tray Machine feet, Documentation Other: Spindle holder SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to For further data, please refer to the attached data sheets

S. No.: IL 45000423 Counter: 37 Mil. Equipment / additional information: Bought as HP Indigo 7600, together with installation immediately on-site upgraded to 7800 Complete with 7 colours, including white-ink option and OFIR (Onplace Fast Ink Replacement) Including Auto Alert Agent Print options: -One-shot -Sandwich-printing -Raised printing -Textured effects (digital embossing / digitaal pregen) -Fluo-colours -White-ink 4 trays, one tray equiped with thick substrate kit (thickness up to 480 micron) 1 stacker Including HP SmartStream production Pro Print Server -OS hard drive with 230 GB -Hot-folder / jobs hard disk with 1.36 TB -Total of sas-harddrives of 4.68 TB (16x 300GB sas-hard drives) -Servertype: HP ProLiant DL380p Gen8 Including original Chiller of Indigo

Format Range: max. 1650 mm min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS X-tend 8 channel with 4 nozzles, Disc gluing unit link with re-pumping device, electronic Overtaking fold with servos, feeder with vacuum, primary crusher left, Kickers, counters, digital position indicators, pressing device after folding, motorized threading station, Jagenberg DBS 01 control, Fully automatic format setting Jagset II, corrugated cardboard package , 3 x alignment with the press belt, pneumatic, clocked press belt. Press belt extension, video surveillance tray, cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running, by arrangement.

Aluminum table, aluminum work table -Execution: stable -Ground floor: 1 -Plastic panels -tray -Dimensions: 1800/700/H820 mm -Weight: 60 kg

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H800 mm -Weight: 82 kg

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

-Stainless steel work table -Execution: stable -Ground floor: 1 -Border -Tray -Dimensions: 2000/930/H930 mm -Weight: 82 kg

Sell a used, mobile, cooling medium mixer. Integrated drip tray for the barrel contents. Automatic hose reel Mixer Type: Mini 1500/3000 MA Counter for liter delivery, during filling Condition used When shipping, this must be organized by the buyer.

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort

turning diameter: 120 mm turning length: 380 mm control: Fanuc 18 iTB max. swing diameter: 300 mm : : 8000 min/-1 : 7,5 kW : 26 Nm spindle nose: 100 mm spindle passage: 32 mm A-Axis: : 8000 min/-1 : 5,5 kW : 23 Nm spindle nose: 100 mm spindle passage: 32 mm : : 12 pos. tool taper: VDI 16 Sub Spindle: x-axis: 400 mm z-axis: 400 mm feeds:: rapid traverse: 12 m/min total power requirement: 20 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,8 x 2 x 1,7 m CNC - Ultra precision turning centre - CNC control Fanuc 18iTB - Main and counter spindle - Q-axis - SAUTER tool turret 16-fold (0.5.480.510) VDI 16 - Linear tool slide - automatic doors - Chip tray - Coolant system with fine filter (high Pressure Pump) - 3 jaw chucks - Various clamping devices/pressure collets - Various tool holders Control On: 24000h The data for this ad was created with ModulMWS - the software  ...

Robot milling cell Manufacturer: AMI consisting of the following components Industrial robot Kuka type KR180 R2500 extra Year of construction 2019 Operating hours: 100 Control: KRC4 Milling robot system 12 kW for KRC4 ES779 milling spindle Recooling system Socket for robots 2 x Kuka positioner KP 2 HV2600 HW with base plates 6-fold tool tray Enclosure for 2 separate work rooms

Bread cutter Model: Varia Pro 1000 easy operation 200 discs/min Cutting width/bread length 490mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 990 x 746 x 1080 mm, WxDxH Bread dimensions max: 490 x 340 x 160 mm L x D x H DGUV V3 called Connection 230V,1 kW New machine with 24 months warranty Option: - Stainless steel version - Automatic claw - Bag holder - Special colours - front bread tray Visit our large bakery machinery exhibition!

- Year of manufacture April 2015 - First installation January 2016 - Impression Counter: 38.7 million B2 impressions (status from November 2023) - 7 colours authorized and installed - Pallet Feeder - Drawer feeder - Inline Priming Unit with Anilox Drum and Applicator Drum - Conductivity and Density Meter - Proof Tray / Line coater bridge - Stacker - Tresu iCoat 30000 Coating Unit for water-based and UV-varnish Flood / Spot - HP SmartStream L&P Server GEN8 v5 for 30000 by ESKO - Software Options: Dynamic Barcode, Power Layout and Dynamic Marks, VDP Tools and HP Mosaic Software - ESKO Software Version 5.2.3.0 - Press Software Version 10062.0.0.34 - Customer Uptime Kit 30000 - Light Table - Chiller Unit Model EVO45 - Machine is technically in good condition - Machine is still in HP Service Contract until January 2024 Technical Specifiations: Printing speed: Up t ...

MICAFIL Winding Lathe Type WBD-5 -100/300 Winding, shrinking, turning lathe / Type V-B-V Max Rotor Diameter 1800 mm Max Carriage Length: 450 mm Tray diameter: 1200 mm

Shell sealer Rühle VR1, built in 2005, in a good used and functional condition. Metal parts made of stainless steel. Packaging machine / tray sealer with scale and label printer, weighs, packs and labels the goods in a single operation. PC control. Supplied with two mould inserts. Machine is prepared for fumigation. Machine is rollable. Dimensions W/D/H 60/70/170 cm. Power ratings 230 Volt, 1,5 kW. Workshop tested, immediately ready for use. More on request.

WMW SIP 400x500 GRINDING MACHINE Magnetic tray The machine is located in France.

belt width: 150mm; belt length: 2260mm; veneer grinding unit: nein; oszillation: ja; weehl diameter: 115 mm; grinding unit tiltable: ja / 90° - 0°; working table: 750 x 250 mm; seperate table: 300 x 245 mm; belt speed: 16,3 m/sek.; suction connection: 100mm; motor power: 3 kW / 400V; machine length: 1270mm; machine width: 600mm; weight: 120kg; properties Oscillating sanding belt ensures a high removal rate and a clean sanding pattern Large dimensioned work table with integrated T-slot for holding the miter fence Easy sanding belt change by means of quick release lever Sprung belt tension, thereby automatic compensation of belt length differences Continuously swiveling sanding unit for vertical and horizontal sanding Graphite coating on the back of the sanding belt increases the sliding properties of the sanding belt As standard with mechanically oscillating grinding  ...

1 automatic valve node Make: Südmo with approx. 40 valves in NW 65 and 80 for 5 tanks with 4 circuit el pumps with drip drip tray 1 automatic valve node Make: Südmo with approx. 40 valves in NW 65 and 80 for 5 tanks with 4 centrifugal pumps with drip bath

turning diameter over bed: 320 mm turning diameter over slide rest: 200 mm turning length: 900 mm turning diameter in the gap: 320 mm turning speeds: 75 - 2000 U/min centre height: 160 mm spindle bore: 38 mm tailstock quill taper MT: 3 connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,75 x 1,7 m SINO digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 250mm bezel fixed Quick-change steel holder with 4 pcs. steel holder machine light Chip tray, chip protection wall Hardened and ground bed tracks lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used GSP 55 EVO BB flowpack. Manufacturer: General System Pack Year of manufacturing 2019. Production speed: Up to 150 ppm The GSP 55 EVO BB horizontal packaging machine is the result of evolution and many years of experience in the field of horizontal product packaging. It is an electronic, multifunctional and solid machine. Extremely flexible when it comes to changing formats, adapted to packing products in both unit and multipack packaging. The machine is distinguished by its simple design as well as ease of maintenance and safety. Packaging Pillow, PillowBag, Tray, Pillow with Euro hanger Products: cookies, bread, cake, crisps, chips, chocolate, vegetables, tomatoes, fruit, wafers, trays, electrical contacts, plugs, extension cord, furniture accessories, crayons, eyeliner, pens, advertising materials, candles, cloths, sponges, tablecloth, pendants fragrances, dog colla ...

Dürr Ecoclean 79W KVI parts washer The Dürr Ecoclean KVI system enables the cleaning of a wide variety of workpieces, both in the injection/flood cleaning process and for a limited period of time in the spraying process. The KVI cleaning system is characterized by a modular design. This means that a maximum of three systems can be connected in series with this type of cleaning system. The control as well as the data entry is done via the control panel of the 1st module, the other two modules can be controlled from there. The main advantage of this modular technology is that different treatment media can be used and thus almost all surface treatments / cleanings can be carried out. Compared to conventional cleaning methods, the Dürr Ecolean KVI system achieves very good cleaning results, especially for bulk materials, workpieces with hollows, threaded holes, blind ho ...

x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acce ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according to CE ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Furnishing : - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Face plate 200 mm / D5, according to DIN 55029 - Fixed bezel - passage diam. max. 70 mm - Live steady rest - passage diam. max. 50 mm - coolant device - First filling with Shell Tellus 46 - Pull-out chip tray - clamping disc 320 mm - Quadruple steel holder - Protective device with quadruple steel holder - slip clutch - Longitudinal micrometer stop - Thread clock - LED machine light - reducing sleeve - change gears - 2 center points - Foot pedal with brake function according ...

High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding cartons, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance High-resolution inkjet printing: 128 individually addressable dots per printhead. Completely free print image design within the text area. Combination of text, logos and barcodes in one printed image. Kortho Image Generating Software for logical image creation on the pc. Unique infrared remote control: no wired connection required. Separate, refillable ink tank with industrial-grade volume. Clean, easy filling with ink during operation. Very low cost per print. Printing costs can be calculated by program. Maintenance reduced to a minimum. No need to rinse with solvent. The advanta ...

Nova BioProfile Flex Automated Cell Culture Analyzer BioProfile is an automated cell culture analyzer that measures up to 15 important cell culture attributes. By combining up to five separate instruments into one easy-to-use instrument, BioProfile FLEX simplifies workflow and saves time, labor, and operating costs compared to multiple instruments. The FLEX automatic sampler takes samples from its two fermenters and transmits them to the measuring unit of the FLEX analyzer. The data obtained from the FLEX autosampler were compared with data taken manually from the reactor and their statistical analysis was performed. Specifications Sample analysis time: 2.5 minutes (gases only – PO 2 + PCO 2 ), 4.0 minutes (Chemistry/Gas and Osmolality), 6.25 minutes (all 15 tests), Operating temperature range: 15-30 °C (59-86 °F), Relative operating temperature Humidity range: 20-85 ...

Tray sealer few operating hours with shell storage shell size: 350 x 350 mm Top foil: Max. 420 mm Power 6 to 15 cycles / minute Delivery time: 2..3 weeks

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

MINK MV 0312 B Dry claw vacuum pump Dry claw vacuum pump BUSCH MINK MV 0312 B DRY VACUUM – QUIET, EFFICIENT AND COMPACT Quiet operation Low noise level thanks to state-of-the-art acoustic solutions, can be installed at workstations Efficiency State-of-the-art claw technology, low energy consumption, minimized operating costs, almost maintenance-free operation, efficient air cooling Compactness Small size SPECIFICATIONS: Nominal flow rate: 290 m³/h Ultimate pressure: 150 hPa (mbar) Nominal motor power: 5.5KW Nominal engine speed: 3000 min⁻¹ Noise level (ISO 2151): 69 dB(A) Weight (approx.): 300 kg Dimensions (L×W×H): 940 x 500 x 650 mm Gas inlet: G 2" Gas outlet: R 11/4" Dimensional Drawing Dry claw vacuum pump BUSCH MINK MV 0312 B Manufacturer's code MV 0312 B Pumping speed Air at 20°C. Tolerance: ±10% Markets & Applications Biogas P ...

Meccaniche Moderne Two Roll Mill 1000mm (40”) wide x 400mm (16”) diameter Smooth rolls Motorised nips Tray fitted beneath mill rolls Complete with motor and control panel Compact Mill

A used Bertolaso gravity filler "Athena" with 40 filling valves and an 8-digit sealer "Sigma 2010/8 - SX" with cap feed and pneumatic closure conveyor is offered. The machine ran actively in our company from 2012 to 2016 and was then dismantled for the construction of another line. Songs did not come to the construction of the line, so that the machine is fully dismantled in stock. A visit can be done by appointment. The dimensions of the filler are: 2960 mm x 2830 mm x height 3250 mm The machine is "packed" on 3 main items: 1. Filler: 1900 x 1900 x 2960 approx. 3200kg 2. Substructure: 2550 x 1450 x 2710 approx. 2200kg 3. Fairing and various accessories distributed over several pallets: 5000 x 2250 x 1750 approx. 2400kg The filler is designed for bottling still fruit juice at 85°C. Electrical connection: 25KW 400V/3Ph./50Hz Compressed air: 6 bar 600NL/min Water: 3 bar  ...

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sidel SBO 20 Universal Aseptic Bottling line - Capacity: up to 40.000 bph by 500 ml / 28.000 bph by 1500 ml Products: fruit juices Bottle formats: 200 ml, 500 ml, 1500 ml, 1750 ml Year of manufacturing: 2011 consisting of: 1. SIDEL SBO 20 Universal PET blowing machine, year of manufacturing: 2011 composed of: – preform tipper – preform hopper, unscrambler and infeed rail – Sidel ARS system HP air low consumption – Eco2 oven with 20 heating modules for 38 neck – blowing station for 20 quick change shell molds, – Compressor ABC 4HP-4-LT complete but without cooling tower moulds are not included 2. Sidel Rafale air conveyor system from exit Sidel blower to entry Sidel aseptic filler with curves etc – length approx. 250 meters also with full automation & drive and electrical panels. 3. Sidel Sensofill FMA 80/24K BS 13 aseptic tribloc, composed o ...

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

We offer a Dokadek slab formwork 272.62m² with accessories. The formwork is checked and sorted. All elements are covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. Suitable for higher-value applications. New value 120081,00€ - 70% discount = special net price 36150,00€ 77 x 586501000 Dokadek element 1.22 x 2.44m 22 x 586502000 Dokadek element 0.81 x 2.44m 0 x Dokadek compensator 2.44m 27mm / 21mm 0 x Dokadek compensator 1.22m 27mm / 21mm 0 x Dokadek compensator 0.81m 27mm / 21mm 120 x 586506000 Dokadek support head 6 x 586539000 Dokadek corner head 30 x 586536000 Dokadek Wall Head 10 x 183063000 Dokadek Wall Bracket 25 x 586518000 Dokadek suspension bracket H20 4 x 586540000 Dokadek Mounting Rod B 2 x 586541000 Dokadek stripping tool 0 x 582528000 Spring Bolt 16mm 3 x 583011000 Doka reusable container 1.20x0. ...

Universal milling machine Hermle UWF801 Year of construction ca 1990 Active Digital Display Heidenhain TNC114 Travel: X-travel: 500 mm Y-travel: 430 mm Z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Quill stroke vertical: 80 mm Speed range: 50 - 2500 / 18 rpm Feed rate: X/Y: 4 - 1600 mm/min Feed rate: Z: 4 - 1000 mm/min Rapid traverse: X/Y: 1.6 Rapid traverse Z: 1 m/min Spindle drive: 3 kW Weight approx.: 1500 kg Dimensions: LxWxH: 1.6 x 1.5 x 1.8 m Accessories/Equipment: - Angle table - Fixed table (table size: 800 x 395 mm) -Operating instructions - Machine feet - 4pcs tool holders - Chip drip tray - Hydraulic tool clamping - Coolant device - Machine light The machine has been technically tested and is fully functional Spindle concentricity 0.004mm Reversing  ...

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!