traub a 15 used for sale

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication

Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers PN20 Glue scrapers Nozzles for detergent and anti-stick Polishing unit Control: Power Control PC22

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

screw compressor + dryer capacity: 702 l/min (at 10 bar) Maximum working pressure: 10 bar Power: 5.5 kW / 7.5 hp Pressure tank: 270 l Total operating hours: 10,670 Hours under load: 1,582

This hot water tank is a vertical, insulated stainless steel tank with an and . The tank is also equipped with a ( / ) and is ideal for applications where hot water is required at a constant pressure. The tank has an outlet pipe, a hose level indicator, and a pressure gauge for pressure monitoring. The robust construction and high-quality materials ensure long-lasting and reliable use in industrial environments. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, insulated, heatable stainless steel tank, Gross volume: 2000 l, Height: 2100 mm, Material: Stainless steel 1.4404 (AISI 316 L) with insulating cladding made of 1.4301 (AISI 304), Base construction: standing on 4 feet, Features: Insulation (insulation thickness 50 mm); heating jacket; temperature control; pressure booster pump (Grundfos); outlet pipe; hose level indicat ...

These - from () stand on four legs and offer a for fermentation and storage under controlled conditions. With a . and operating temperatures up to 50°C, they are extremely versatile. The tanks feature frame and cone cooling, cleaning lines, two outlet lines (cone tip and cone wall), pressure gauge, bunghole, hose level indicator, sampling tap, and temperature control. The 50 mm thick, chloride-free PU insulation and robust AISI 304 stainless steel ensure durability and hygienic, temperature-stable use. Ideal for breweries, beverage manufacturers, and industrial processes that require gentle storage under controlled cooling and pressure. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable, stainless steel pressure tanks with temperature control, Gross volume: 2700 l, Operating pressure: 2,5 bar, Operating temperature: 5 ...

KEG Filling Plant, Additional title: Semi-automatic keg filling system, Performance approx.: 50 KEG/h, Power: 2,5 kW, Voltage: 230 V, Frequency: 50 - 60 Hz, Heating / Cooling: steam 1.5 - 2 bar, < 125°C, Water: 2 - 3 bar, 80°C, Compressed air: 5 - 6 bar, Length: 860 mm, Width: 760 mm, Height: 2530 mm, Weight: 130 kg, Formats: Combi fitting Ø 75 mm, World KEG fitting, Operation / Control: Control cabinet, Siemens 1200, Touch panel, Material: stainless steel, Position: free standing , Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet

Oil-free scroll compressor with integrated refrigeration dryer., Additional title: oil-free scroll compressor, Volume flow at 7,75 bar: 1,12 m³/min, Volume flow at 4 bar: 1,16 m³/min , Power: 12,9 kW, Voltage: 400 V, Frequency: 50 Hz, Length: 953 mm, Width: 1207 mm, Height: 1660 mm, Weight: 520 kg, Features: with integrated refrigerant dryer, frequency controlled

Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data Capacity: up to approx. 15,000 bph Formats: 0.5 L – 1.0 L (15 formats) Application: Self-adhesive labelling of bottles Configuration: 3 labelling stations (front / back / neck/seal) Label positions: Front, back, neck/seal Incl. Inspection syst ...

Feuma ASETM Apple Processing Machine Peeling, coring, dividing Capacity approx. 70 - 100 kg/h only DGUV V3 tested by us Connection 230V Used machine Come and visit us!

Alco teflon grill belt, model: AGT 1000/4500-T, serial number: 66301, year of construction: 2017, 400 V, 3 Ph, 50 Hz, 16 A, 6 kW, working hours: 475 hours, teflon belt, belt width: 1060 mm, plastic mesh belt, belt width: 1020 mm, clearance: 1250 mm x 120 mm, total dimensions: 6450 mm x 3000 mm x 2300 mm.

Used ALTEC Monoblock for filling and closing bottles 3000 BPHTechnical Specifications & Performance DataThis Filling and Capping Monoblock is engineered for efficient beverage production and industrial packaging. Manufactured by ALTEC, model PO 12/1, it combines a 12-valve filler with a 1-head capper to deliver reliable performance on a wide range of bottle sizes and products. As a versatile asset for a used bottling line or second hand bottling equipment upgrade, it supports both hot-fill and cold-fill applications in PET and glass containers.Manufacturer: ALTECModel: PO 12/1Year: 2004Filling valves: 12Capping heads: 1Production capacity: up to 3,000 bph on 0.5L; up to 2,000 bph on 1.5LBottle formats: Compatible with 0.5L, 0.85L, 1.0L, 1.5L, 2.0L bottle formatsContainers: Designed for PET and Glass bottle handlingInstalled power: 3 kWOperating pressure: 6 barDimensions (main unit): 2300 ...

ALTEC PO 12/1 Filling and Capping Monoblock – Overview This used ALTEC PO 12/1 filling and capping monoblock is engineered for efficient bottling operations within beverage production and industrial packaging environments. Designed to handle both PET and glass bottles, it is suitable for water and 100% fruit juices, as well as other low-viscosity still liquids. With 12 filling valves and 1 capping head, the machine offers compact, integrated performance for second hand and used bottling line applications. Manufactured by ALTEC, the monoblock supports hot or cold filling modes for still products, making it a versatile choice for small to medium production runs. Variable speed control via a frequency regulator allows operators to adapt throughput to different container sizes and product requirements. Technical Specifications & Performance Data Model: PO 12/1 Manufacturer: ALTEC Year o ...

Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Container Specifications The APE Impianti INCA 200 ...

Used Case Packer APE INCA 2000 up to 8000 bph Introduction Built in 2004, the Used Case Packer APE INCA 2000 up to 8000 bph functions as a high-performance industrial solution for bottle packaging. It operates at high speed, handling up to 8000 bottles per hour, which makes it a perfect fit for production plants that demand continuous operation and reliability. Moreover, it employs high-quality materials and features a robust design that withstands the typical stresses of industrial environments. Currently, the machine resides in storage, and therefore, it remains ready for deployment. Additionally, it continues to meet strict production requirements while simultaneously ensuring durability. Structural Features and Materials of the Used Case Packer APE INCA 2000 up to 8000 bph The machine uses a stainless steel frame and covering that guarantee resistance to wear and corrosive agents. Fu ...

Used Case Packer Ape Inca 2001 Pack 2 Cartons Of 12 or 4 Cartons Of 6 Bottles Each Bar Movement Of The Mechanical Head Group The bottle gripping head is variable for various bottle diameters Variable Production Speed With Inverter Machine With Stainless Steel Frame And Fairing Used packer APE with Accident Prevention Protections Year Of Construction 1999 Production 8,000 bots. Now in 12 And 6 Cartons Used packer APE In Good Condition Machine in the state in which it is found working With Existing Formats Some specification: Used case packer APE Inca 2001 entirely in stainless steel, a machine of minimum encumbrance in terms of space and very mechanical, easy to use and very efficient for the type of work it is called upon to perform. The bottle inlet can be straight or angled 90 degrees with a motorized bend, so it can be adapted to any layout. the spare parts are easily available, the e ...

Used Case Erector APE up to 9000 bp/hour Introduction of the Case Erectort APE The used APE case erector is capable of handling up to 9000 bp per hour. It stands as an indispensable machine in the bottling process. Performance and Specifications Primarily, the APE case erector is meticulously engineered to operate at an impressive speed of 9000 bp per hour. It thereby ensures a seamless and highly efficient flow along the production line. Equipped with an advanced glue closure system, it guarantees indeed a secure and steadfast sealing of the boxes. Thereby drastically reducing the likelihood of leaks or damage during transit. Safety Features Undoubtedly, safety remains paramount within any industrial setting. Hence, the APE case erector is outfitted with an array of cutting-edge safety features, meticulously designed to safeguard operators throughout the operational cycle. These include ...

Used APE Case Sealer up to 1200 Cartons/Hour Reliability and Efficiency The used APE Case Sealer stands as a cornerstone of reliability and efficiency in the bottling industry. Designed for high-speed operations, it represents the pinnacle of technological advancements. Indeed, it meets the stringent demands of industrial environments with finesse and precision. Perfect Sealing Constructed with meticulous attention to detail, the sealing mechanism on top, reinforced with hot glue and powered by a Nordson adhesive, ensures a perfect seal. Seamlessly integrated, the automatic insertion of the carton separator simplifies the workflow. This facilitates a smooth flow of cartons and optimizes productivity at every step. Automated Operation The automated sealing of the rear flap, orchestrated by a pneumatic piston, adds a layer of operational sophistication. This accelerates processes and minim ...

Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour Technical Description of the Used Wrap Around OCME ALTAIR N/50 The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour handles PET and glass containers using high-efficiency wrap-around carton packaging. OCME manufactured this ALTAIR N/50 model in 2000 to support high-capacity bottling lines. As a result, the machine provides a robust and reliable solution for secondary packaging operations. Currently, the machine remains in storage; however, the team has preserved it under controlled conditions to ensure its operational integrity. Furthermore, its compact and modular structure allows manufacturers to install it in both existing and new production layouts. Configuration and Operation The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour uses a straight-line infeed, which consistently guides containers into the carton-forming area. Once bott ...

Technical Specifications & Performance Data Used Case Erector Ape 1997 – Form 2000 HM SX by APE Impianti. Robust, CE-compliant second hand equipment designed for high-throughput industrial packaging lines supporting beverage production and other FMCG. Manufacturer / Model: APE Impianti, Form 2000 HM SX Year of manufacture: 1997 Throughput: up to 2,000 cases per hour (application-dependent) Closure system: hot-melt glue (Nordson glue heater), single closure configuration Frame & guarding: painted steel frame with stainless steel panels and safety protections Case format capability: engineered for multiple carton sizes; rapid adjustment for different footprints Application: secondary packaging for PET, glass, and aluminum containers (bottles and cans) Typical products: water, juice, beer, wine, soft drinks, and similar beverage production items Compliance: CE conformity; manuals avail ...

Technical Specifications & Performance Data The Used Case Erector Ape 1994 is a robust secondary-packaging solution from APE Impianti, model Form 1200 HM. Designed to erect corrugated cases for downstream packing, it supports beverage and food applications where consistent case integrity is crucial for high uptime in a used bottling line or broader industrial packaging environment. Manufacturer: APE Impianti Model: Form 1200 HM Year of manufacture: 1994 Category: Case Erector (secondary packaging) Closure system: Configured for hot-melt adhesive sealing (per HM designation); tape or other options subject to configuration Operational status: In storage; manuals available for setup, operation, and maintenance Typical application: Case forming for packing PET bottles, glass bottles, aluminum cans, or mixed formats for water, juice, beer, wine, and other beverages Throughput: Format- and mat ...

Technical Specifications & Performance Data The Used case packer Mas Pack Accupack 3/6 – 13000 bph is a robust, second hand solution for high-speed industrial packaging in beverage production. Built by MAS PACK in 2004, this Accupack 3/6 Major combines mechanical precision with adjustable handling to place bottles or cans into corrugated cases with speed and repeatability. It is well suited to integrate within a used bottling line alongside filling, rinsing, capping and labeling equipment. Manufacturer / Model: MAS PACK Accupack 3/6 Major Category: Case Packer (pick-and-place) Year of manufacture: 2004 Rated speed: up to 13,000 bottles per hour (format-dependent) Gripper system: 36-head bottle pick-and-place assembly with adjustable grippers Packaging patterns: multi-pattern capability (e.g., configurations such as 3x6, 6x4, 12-bottle arrays subject to tooling) Container types: PET, ...

Technical Specifications & Performance Data The Kosme Kosmac 6r1s3s ADH is a rotary self-adhesive labeler with additional glue application for seal/tax band, designed for dependable operation in beverage production environments. Ideal for integration into a used bottling line, it offers consistent labeling quality for glass bottles in still and sparkling applications. Manufacturer / Model: Kosme – Kosmac 6r1s3s ADH Year of manufacture: 2000 Production speed: up to 3,000 bottles per hour (format-dependent) Container types: Glass (configured) Bottle formats: 0.375 L and 0.75 L Labeling configuration: 3 self-adhesive groups (front/back/neck) + glue station for state/tax seal Number of stations: 4 total Number of plates: 6-plate rotary carousel Rotation direction: Clockwise Electrical supply: 380 V, 50 Hz, 3.5 kW, 3-phase Approximate weight: 2,000 kg Advanced Automation & Control System ...

Used SMI APET 143DF shrink wrapper 14000 BPHTechnical Specifications & Performance DataThis SMI shrink wrapper model APET 143/DF is a robust solution for secondary packaging in beverage production and industrial packaging environments. Designed to handle PET and Glass containers, it delivers dependable performance for high-volume applications in a used bottling line or as a standalone packer. The machine supports film-only bundles with the current format set for 1.5 L bottles in a 3x2 configuration, making it ideal for multipack distribution.Manufacturer: SMIModel: APET 143/DFYear of construction: 1998Maximum speed: 14,000 (unit per hour as specified)Current package format: 1.5 L, 3x2Container materials: PET, GlassMaximum container height: 380 mmWork table height: 1250 mmMachine pitch: 545 mmNumber of film reels: 2Maximum film reel diameter: Ø 500 mmPackage type: Film only (no tray)Ad ...

Optimize Your Bottling Operations with a Used Arol Capping Machine 6 Heads Aluminum Screw 9000 bph When it comes to efficient bottling operations, the importance of a reliable capping machine cannot be overemphasized. For experts in the bottling industry seeking dependable and high-performing equipment. Consider a used Arol Capping Machine with 6 heads aluminum screw and a capacity of 9000 bottles per hour (bph). Arol is a renowned brand in the industry, recognized for its quality and durability. This particular model was manufactured in 1999, yet it still retains its high performance and reliability, a testament to Arol’s commitment to building long-lasting machinery. Its stainless steel casing ensures it withstands harsh conditions of the bottling environment, thus guaranteeing long-term use. Arol Capping Machine: Quality and Durability for the Bottling Industry The machine featur ...

Technical Specifications & Performance Data This 20,000 L aseptic tank is engineered for hygienic storage and buffering in beverage production and industrial packaging environments. It combines a newly manufactured pressure vessel with proven aseptic system heritage, making it a strong solution for second hand installations and used bottling line upgrades. Nominal capacity: 20000 L Design pressure: 0.09 to −0.1 MPa (positive pressure and full vacuum range) Pressure test pressure: 0.12 MPa Design temperature: 148 °C Main body material: S31603 stainless steel (food-grade corrosion resistance) Manufacturing year (tank body): 2025 Tank year: 2011 from Tetra Pak Engineering standard: GB/T 150-2024 (pressure vessels) System heritage: Tetra Pak aseptic module lineage for beverage applications Advanced Automation & Control Systems The tank is prepared for seamless integration into automa ...

Used AVE automatic rinser machine 3000 BPHTechnical Specifications & Performance DataThis automatic rinsing machine is engineered for internal washing of bottles in beverage production and industrial packaging environments. Manufactured by AVE, model RAI12, it offers dependable performance for second hand and used bottling line applications. With PLC-based automation, the unit delivers consistent rinsing cycles for glass containers, ensuring clean bottles are transferred to downstream filling and capping equipment.Manufacturer: AVEModel: RAI12Machine type: Automatic Rinsing Machine for internal bottle washingYear: 1999Production speed: up to 3,000 bphContainer material: GlassBottle format compatibility: 1.5L bottlesControl system: PLC-based automationAdvanced Automation & Control SystemsThe AVE RAI12 integrates a PLC control platform to manage rinsing cycles, infeed timing, and fault dia ...

Used complete bottling line for CSD in PET and glass - 8000 bphTechnical Specifications & Performance DataThis complete used bottling line is engineered for beverage production with PET and glass bottles. Optimized for water and carbonated soft drinks, it combines reliable filling, labeling, and end-of-line packaging with robust utilities and process equipment. The line integrates components from reputable manufacturers to deliver consistent quality and uptime in industrial packaging environments.Production speed: up to 8,000 bottles per hourCompatible bottle formats: 0.33L, 0.5L, 0.75L, 1.0L, 1.5L, 2.0LContainers: PET and Glass bottlesMain filler/capper/rinser: Sinkrofill 40/50/10/10, 50 filling heads, 3–5 capping headsBlow molder: Easy Blow 4L (4,200 bph nominal)Labelers: Gernep Rollfed 8-480-1RA (foil/OPP) and Gernep Soluta 10-640 3SK (paper), up to 10,000 bphPack & handle applic ...

Used Complete Bottling Line for PET and Glass 2007 Depalletizer This unit takes bulk of bottles that are stacked on a pallet and places them onto an accumulation area before entering the Lowerator unit. The operation of the machine is manual. There are some forklift interactions with loading full pallets onto the infeed conveyor, removing the empty pallets from the discharge conveyor and the placement of empty pallets at the operator level (layer dividers). Cleaning is carried out with the machine switched off and the hoist lowered. Bottle Lowerator The Lowerator transfer the bottles from the Depalletiser operator level to the lower level Rinser before entering the Filler. This unit is used for glass bottles only and can be mechanically adjusted easily depending on different bottle dimensions. Gripper Rinser Bottle Rinser provides an excellent way to fully clean the bottles. The bottle r ...

Used Tetra therm aseptic pasteurizer - 2012Technical Specifications & Performance DataThis aseptic pasteurizer delivers reliable high-temperature short-time processing for demanding beverage production. Engineered within the Tetra Therm family and manufactured in collaboration with Alfa Laval, it is configured for aseptic operation with integrated deaeration for quality preservation in sensitive products. As a second hand unit from industrial packaging environments, it offers strong performance for a used bottling line or a standalone processing cell.Machine type: Aseptic Pasteurizer (Flash)Brand: Tetra Pak (engineered with Alfa Laval)Model: CM6-SMYear: 2012Production capacity: up to 12,000 L/h (current setting approx. 6,000 L/h)Maximum process temperature (TS): 125 °CMaximum allowable pressure (PS): 6.0 barTest pressure (PT): 8.6 barProcess volume: 162.0 LFluid group: 2Deaerator: Inc ...

Used AMENDUNI complete oil prodaction line 20 qlhTechnical Specifications & Performance DataThis complete continuous-cycle olive oil line is engineered for efficient, high-throughput extraction with integrated handling, crushing, malaxing, separation, and decantation. Manufactured by AMENDUNI, it provides a robust platform for second hand industrial packaging and food processing environments, supporting seamless integration with downstream bottling and industrial packaging operations for edible oils.Operating mode: Continuous-cycle olive oil extraction lineManufacturer: AMENDUNIYear: 1987Throughput: Up to 20 quintals per hour (approx. 2,000 kg/h)Included equipment: olives conveyor, leaf remover, stainless steel hopper, screw conveyors, hammer crusher, 4 stainless steel malaxers, 2 paste pumps, 2 decanter centrifuges, pomace screw conveyor, 4 stainless steel decantation tanks, separators, ...

Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automa ...

Used Sidel Alsim PET bottling line for carbonated water and drinks - 14.000 bphTechnical Specifications & Performance DataThis complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations.Production speed: 13,000–14,000 bottles per hourContainers: PET bottles, neck finish 28 1881Blow molder: Sidel SBO10, 10 cavitiesPreform handling: Sidel EBH 2050 preform hopperAir conveyor: Sidel-AlsimRinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10KRinser: 48 clamps, 1 water treatmentFiller: 60 isobaric valvesCapper: 10 headsPremix/Mixer: Sidel-Alsim, 30 m³/h outputBottle dryer: ACI ...

Used Aseptic Filling Line SIPA GEA for Milk up to 48,000 bph GEA ASEPTIC BLOW FILL SYSTEM ABF 2.0 Fully aseptic blowing, filling and capping system featuring H2O2-based preforms sterilization. Introduction to the Aseptic Filling Line SIPA GEA for Milk up to 48,000 bhp The used aseptic filling line SIPA GEA for milk up to 48,000 bottles per hour delivers a highly efficient and technologically advanced solution for the packaging industry. Specifically, this system ensures high-quality standards and food safety by using machines from 2018. Moreover, it processes milk in 235 ml bottles with plastic screw caps and a 38 mm neck. The line has only 900 operating hours. SIPA SFR 24 EVO Blow Molding Machine of SIPA and GEA aseptic line The SIPA SFR 24 EVO blow molding machine, manufactured by GEA in 2018, produces high-quality bottles from PET preforms. As a result, it maintains continuous and uni ...

Used ALFATECK line for soap - 2000 BPHTechnical Specifications & Performance DataThis complete used bottling line integrates a dynamic weight filling monoblock and a linear self-adhesive labeling machine by ALFATEK with a fully electric single-cavity stretch blow molding machine by Meccanoplastica Iberica. Engineered for PET detergent and soap bottles, it delivers reliable performance for industrial packaging and bottle production.Filler Output: 1,500–2,000 bph (reference: 500 ml soap)Labeller Output: up to 2,500 bphBlow Molder Output: 1,000–1,200 bphContainer Formats: 0.1L to 2.5L (examples: 0.1L, 0.5L, 2.5L)Container Type: PET bottlesFiller Bottle Range: height 230–360 mm; diameter 58–110 mm; neck diameter 16–30 mm; neck height 40–75 mm; allowable fill level variation ±30 mmLabeller Type: automatic stainless-steel linear self-adhesive applicationBlow Mo ...

Used Automatic Depalletizer ACMI 2200 plastic crates/hour The Used Automatic Depalletizer ACMI 2200 plastic crates/hour, model Rasar D180, operates as a fully automatic system for bottom-feed depalletizing of 1-liter glass bottles packed in 12-bottle plastic crates. Specifically designed for high-speed bottling lines, the system processes up to 2200 boxes per hour. Moreover, its modular frame allows seamless integration into existing production lines. Although it is currently dismantled and in storage, the unit remains in full working condition, ready for reinstallation. Depalletizing Structure and Operating Mode The Used Automatic Depalletizer ACMI 2200 plastic crates/hour utilizes a conventional automatic vertical structure to handle pallet loading from below. This configuration, therefore, ensures optimal stability and precision during the handling of glass containers. In addition, th ...

Used Decrater APE INCA 2000 UP TO 8000 Bph Efficiency and Precision in Bottling of the Decrater Ape inca 2000 Firstly, in the bottling sector, efficiency and precision are paramount. The Used Decrater APE INCA 2000 up to 8000 Bph stands out as technologically advanced. It specifically meets the industrial decrating needs. Handling and Mechanical Movement Moreover, the APE model 2000 decrater excels in its operation. It adeptly handles two crates of 12 bottles each. Furthermore, the mechanical head movement ensures precise handling. This is crucial for preventing bottle damage. Flexibility and Adaptability of the Decrater Ape inca 2000 Additionally, flexibility is a significant strength of the Used Decrater APE INCA 2000. It features a variable bottle grip head, which easily adapts to different bottle diameters. Therefore, the machine proves to be versatile and efficient. Variable Product ...

Used Tetra Pak helix accumulator 44 meters year 2018 The Used Tetra Pak helix accumulator 44 meters year 2018 efficiently accumulates and manages the production flow in aseptic packaging lines. Notably, Tetra Pak manufactured this model, identified as ACHX10-0400-44, in 2018 to handle brick-type carton containers. Technical and Functional Features To begin with, the Used Tetra Pak helix accumulator 44 meters year 2018 accumulates containers using a helical system that extends 44 meters. Its primary function is to compensate for speed variations between upstream and downstream machines. As a result, it optimizes production flow and prevents plant downtime. Furthermore, the ACHX10-0400-44 model provides high temporary storage capacity and maintains a continuous container flow without compromising structural integrity. Additionally, the helical architecture optimizes available space and red ...

Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guaran ...

Used Case Divider Inserter APE year 1998 Introduction In the world of bottling, every detail matters. Moreover, the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions. The APE 2001 Model: A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998. This model is designed to accurately and swiftly insert dividers into 6 and 12-bottle cartons, ensuring efficient and uninterrupted production flow. Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high-production environments. Additionally, the divider insertion system has been optimized to guarantee precise and uniform positioning, minimizing waste and enhancing packaging quality. Operat ...

Used Automatic Microfilter Innotec 1997 INTEC MICROFILTER NOW INNOTEC Automatic Microfilter year 1997 CE marked, INNOTEC, on SKID dimensions 3,7m x 1,5m. – Process speed at 10,000 bottles/h controlled with litre-counter – 3 Housings of microfiltration 12 candles 30″ and one of 40″ Connection code 7 – 2 Housings for water filtration for rinsers and washes with 5 candles 30” connection code 7 – Siemens S7 PLC with network card for remote control with VPN, expandable, because it was replaced with a more powerful one because it was full, new operator panel – Bubble test with automatic drains and TEST OK report, in order to have the machine ready to start in the morning -Steam inlet to sterilize the filler with automatic valve and inserted in the cycles that can be modified – Weekly programming of washing starts, production cycles, sanitization, st ...

Performance ·Max. motor power: 30 kW ·Max. engine speed: 10,000 rpm ·Rated torque (test bench): > 100 Nm ·Max. braking torque: up to 122 Nm ·Max. braking power: up to 46 kW (overload) Dynamometer ·Type: AC asynchronous dynamometer, frequency-controlled ·Voltage: 360 V ·Cooling: Forced ventilation (IC06) ·Protection class: IP23 ·Insulation class: F ·Speed range: 0 ? 10,000 rpm ·Continuous operation: up to 40 kW (depending on speed) ·Overload capability: 1 min every 10 min Measurement System ·Torque measurement: oHBM T12HP torque flange oMeasurement range: 200 Nm oAccuracy class: 0.02 ·Speed measurement: oIncremental encoder, 1024 pulses/rev oAccuracy: ±0.01 rpm ·Vibration monitoring: oIntegrated vibration sensor Mechanical Structure ·Slotted base plate with air suspension (Bilz air springs) ·Vibration-damped test bench ·Motor mounting system: oAdjustable aluminum fram ...

spindle diameter:200 mm x-travel:10000 mm y-travel:4000 mm z-axis:1500 mm W-axis (spindle longitudinal):1000 mm bore spindle turning speed range:1 - 2000 U/min dimension of the ram:600 x 530 mm high speed spindle taper ISO:60/50 rapid motion - x-axis:8000 mm/min rapid motion - y-axis:8000 mm/min rapid traverse Z-axis:5 m/min total power requirement:120 kW weight of the machine ca.:135 t dimensions of the machine ca.:16,0 x 5,0 x 10,0 m with CNC Steuerung HEIDENHAIN iTNC 530 hydrostatic guideways x and Y- axis autom. toolchanger 40-pockets autom. Pickup Station for angular milling head, universal milling head and facing head rotary table 3000 x 3000 mm , max load 60 to. v-axis 2500 mm chip conveyor and coolant attachment

number of spindles:8 spindle passage:67 mm Cam controlled multi spindle automatic lathe, used 8 main spindles pick up in pos. 8 threading attachment CNC compound slide in pos. 5, also 2. speed in pos. 2 Hydraulic spindle brake in pos. 4 Incl. length measurement, incl. Brankamp cutting force monitoring tooling: could be different like pictures Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control ?Balluff? clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

number of spindles:8 spindle passage:32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 Dnt Yob: 1993 eight-spindle automatic lathe eight main spindles for bars up to D=32mm Modernized control: Siemens Sinumerik Motors: renewed modern motors suitable for modernized control system Electronic trip dog control: Balluff CNC cross slide position 5 cross CNC cross slide position 6 cross Preparation for gripper in position 8 (gripper optional) Independent feeds Thread cutting couplings integrated bar loader: Pietro CUCCHI; type: rack type magazine The scope of delivery regarding the tooling equipment could be different like pictures.

number of spindles:8 spindle passage:20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AG20 Yob: 2002 eight-spindle automatic lathe 8 main spindles for bars up to D=20mm control: Siemens 840D 1x polygonal turning/thread milling device (new 2011) 1x polygonal turning/thread milling device for long turning (new 2011) 1x thread cutting/quick drilling spindle (new 2011) 1x pick-up device incl. various pick-up collets 4 cnc-cross slides Double cross slide in position 7 Loading magazine PRA 52/P type 33 (bar length 3m), year 2004 High-pressure system Knoll SF 2000/Turbo-3 up to 100 bar, year 2004 Tool monitoring Brankamp Air conditioning unit Rittal in the front switch cabinet incl. spare parts package with various collets, cams and various tool holders for longitudinal and cross slides The machine has been run with oil and has processed brass Please, con ...

BIG weld-on hook suitable for Dieci Agri Farmer attachment, - Year of construction: 20255, - made of S355 steel, Dimensions of the mount:, Bolt diameter above: 61 mm, Bolt diameter below: 45 mm, Bolt spacing [Center - Center]: 350 mm