traub a 15 used for sale

pressure: 50 t chamfer lenght: 1500 mm distance between columns: 1220 mm Control: Cybelec DNC 1200 closing speed: 95 mm/min working feed: 1-10 mm/sec work stroke: 156 mm overrun time: 59 ms tracking travel: 6 mm throat: 200 mm distance table - lower edge of ram: 301 mm table width: 160 mm table height: 850 mm x-axis: 550 mm travel R-axis: +/- 50 Number of axles: 3 (Y, X, R) St. weight: ca. 3600 kg dimensions: mm a lot of lower and upper tools incl. work light new control in 2003: Cybelec DNC 1200 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details.

Filling Machine Manufacturer: Würschum Type VH 150 Volume Minimum 3 ml Maximum 150 ml Manual filling machine for pastes and creams

turning diameter over bed: 3750 mm turning diameter over slide rest: 3250 mm turning length: 15000 mm centre distance: 15000 mm faceplate: 3000 mm workpiece weight: 120 t steady: + 15t Rest: 2 main drive: 119 kW spindle bore: 105 mm spindle turning speed range: 0,33 - 75 U/min feed in x - axis: 300 mm/min feed in y - axis: 150 mm/min tailstock quill diameter: 500 mm total power requirement: ca 140 kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 2-Carriages - Face Plate 3000mm - 6-Steady Rests - 4-Way Bed Construction - Taper Attachment - Inch/Metric Threading - Tailstock With Live Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete factory for producing feed pellets: Bühler DPUC 160kw pellet mill Geelen 19x24 pellet cooler Sprout Matador 90kw Hammer mill Sprout Matador 4000l blender Sprout Matador Crumbler Novidan Sifter for pellets 2x bucket elevators 2x screw conveyors

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Locatelli OMK300 + UF 150/220 automatic lathe Turning length 300mm Maximum Bracket 100x100mm Minimum Branch 20×20 Work after the copiers Drill transfer UF 150/220

Briquetting press Type: BrikStar 150–19 Manufacturer: BRIKLIS Year: 2023 Intended for medium-sized operations, which presses wood waste, straw, hay, paper and other materials into briquettes with a diameter of 65 mm, while offering an output of 130-160 kg/hour (depending on the material) at an input of 13.5 kW, while the version with a hopper of 3 m³ (type 19) weighs around 1340 kg and is equipped with automatic regulation. parameters: Output: 130–160 kg/hour (depends on the processed material) Diameter of briquettes: 65 mm Electrical input: 13.5 kW Suitable materials: Wood dust, sawdust, straw, hay, paper, sedge, poppies, energy plants. Operation: Medium operations, single-shift and multi-shift. Features: Hydraulic press, modern management, automatic quality control, sensor min. levels, possibility of adjustments. Type "19": The designation "19" refers to the version w ...

turning diameter: 430 mm turning length: 519-525 mm control: Mori seiki MSX-805 x-axis: 230 mm z-axis: 520 mm total power requirement: kW weight of the machine ca.: 4100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control MORI SEIKI MSX-501, 2 turrets with 16 tool positions each, driven tools, 2 spindles, bar passage 52 mm, max. speed 6000 rpm, max. turning diameter 190 mm, max. turning length 450 mm, Y-axis +/- 40 mm, machine weight 5,100 kg, chip conveyor

x-travel: 750 mm y-travel: 210 mm z-travel: 1150 + 100 mm control: Fanuc MSX-701III Maximum turning diameter: 660 mm Max. turning length: 1498 mm Diameter over cross slide max.: 400 mm number of spindle speeds: 3000 U/min tool piece magazine with: 40 Plätzen turret: 10 Fach total power requirement: 90 kVA weight of the machine ca.: 26,6 t dimensions of the machine ca.: 5301 x 2997 x 2788 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 € : 339.84 € : 100 to : fix : 300 mm : 680 mm : 1520 mm : 8 mm/s : 5 mm/s : 10 mm/s : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2350 mm : 2500 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31600 € : 603.56 € : 2050 mm : 6 mm : 6 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll ...

material thickness: 0,5-50 mm material width: 1500 mm feed: 4 m/min Operating hours: 900 h weight of the machine ca.: t : dimensions of the machine ca.: m The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Riedhammer Model: DRA 8/150 Year of manufacture: 2021/2022 Operating hours: 1000 h Condition: Mint Gas-heated Included: material feeder, silo, exhaust filter, chimney, water cooling system

CNC milling machine Type: BT 1500 Manufacturer: Style Year: 2012 X: 1500 mm Y: 650 mm Z: 600 mm Max spindle speed: 8000 rpm With accessories Machine weight: 4300 kg Machine in good condition, under power. Find more here - / Contact us at -

Size: 310 x 430 mm Equipments: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : fix : 1500 mm : 300 mm : 1520 mm : 680 mm : 10 mm/s : 5 mm/s : 6 mm : 500x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2275 mm : 2500 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand operating panel Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

CONTROLS   CNC Teach In Controls MONFORTS MTC-K WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 290 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 3 /min   spindle revolutions (max): 2800 /min DIMENSIONS / WEIGHTS   space requirements -left/right-: 3325 mm   space requirements -front/back-: 1550 mm   total height: 1740 mm ATTACHMENTS (TURNING)   tailstock: yes   European CE standards: yes

General SKU430W1393 MakeHermann Waldner LocationSold CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l.( 150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft75-85 rpm Information No.5068 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight700 kg Extra Specifications- mirror polished insideStainless Steel ReactorsHermann WaldnerReactors > Stainless Steel ReactorsBrand > Hermann Waldner What you can expect fro ...

turning diameter: 256 mm turning length: 530 mm control: Fanuc 31i-A turning diameter over bed: 550 mm turning diameter over cross slideways: 350 mm main spindle:: max. turning speeds: 6000 min/-1 Drive power - main spindle: 11 kW max. torque: Nm max. rod diameter: 45 mm spindle head: A2-5 chucking diameter: mm tool turret:: shaft height for square tool: 25 mm Drill shank diameter: 50 mm travel:: x-axis: 210 mm z-axis: 560 mm feeds:: rapid traverse: x 20 / z 24 m/min total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: L 4,18 x B 2,01 x H 1,98 m Technical Specifications: - Manufactured in 2017 but not put into operation until 2021 - Fanuc 31i mod A CNC control - Y-axis - 20 bar tool cooling - Fedek bar loader - Chip conveyor - 12-station tool turret - 10 rotating tools The data for this ad was created with ModulMWS - the software solution o ...

width of the strips: 150 mm band length: 2.000 mm band speed: U/min motor: 400 V loading area: 450 x 160 mm total power requirement: 4,0 kW dimensions of the machine ca.: 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis STYLE BT 1500 was manufactured in 2024. It features an X-axis stroke of 1500 mm, Y-axis stroke of 650 mm, and Z-axis stroke of 600 mm. The machine includes a robust table size of 1850 x 610 mm with a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the STYLE BT 1500 vertical machining centre we have for sale. Contact us for further details.

Size: 520 mm Equipments: Flat stack investors Station 1: 4 Bags Station 2: 4 Bags

: neu : ca. 4 Monate ab Auftragse : Türkei : 71000 € : 1341.9 € : 150 to : 300 mm : 750x500 mm : 1000x700 mm : 500 mm : 10 mm/s : 3,5 mm/s : 22 mm/s : 7.5 kW : 2300 mm : 1400 mm : 2750 mm : 7700 kg 2-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment front light barriers according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 € : 209.28 € : 1 : 150 to : horizontal verschiebbar : 300 mm : 1070 mm : 280x200 mm : 5 mm/s : 10 mm/s : 2110 mm : 1000 mm : 2480 mm : 1870 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extendable Spiral Mixer Kemper SP 150 A PLC Condition: used, was overhauled 5 years ago Capacity in dough: 240 kg Capacity in flour: 150 kg Automatic timer Two speed settings PLC control with programs Friction wheel drive Mechanical Boiler Lock Incl. 2 vat wagons

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Veneer Press Ott Floor Press Type 300 K 150 SL Pressing area 3000 x 1350 mm 5 floors Press pressure at full occupancy 4 kg/cm² Specific pressing pressure for 2 m² occupancy 7.5 kg/cm² Total pressing pressure at 320 atü 150 tons. 6 pressure cylinders from below diameter 100 mm Opening width 400 mm, max. approx. 520 mm if 4 plates are removed Hydraulic motor 2.2 kW Hot water plate consumption per plate approx. 9000 WE/h Heating with hot water – for connection to a hot water pipe good, ready-to-use condition L 3450 mm x W 1480 mm x H approx. 3000 mm Weight approx. 5500 kg

Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement.

: neu : ca. 4 Monate ab Auftragse : Italien : 75000 € : 1417.5 € : 150 to : 500 mm : 2.500 x 2.050 mm : 800 mm : 20 mm/s : 3 mm/s : 2900 mm : 2500 mm : 2500 mm : 5200 kg : horizontal verschiebbar : 2050 mm : 1400 mm : 1600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 37600 € : 718.16 € : 40 to : 1550 mm : X und Y Achse : 160 mm : 1260 mm : 320 mm : 380 mm : hydraulisch : 90 mm/s : 10 mm/s : 600 mm : 845 mm : 100 mm : 120 l : 5,5 kW : 2000 mm : 1600 mm : 2235 mm : 3450 kg NC control for immersion depth (Y) and back gauge (X) synchronization control by means of a torsion shaft sheet support arms light barriers intermediate pieces for the upper tool clamping die seat and die die seat with 4 V openings split upper tool, slightly cranked, divided pedal user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT: laser safety device Fiessler NC controlled R axis manual crowning table motorized crowning table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 € : 982.8 € : 150 to : fix : 1250 mm : 500 mm : 700 mm : 1500 mm : 20 mm/s : 10 mm/s : 3 mm/s : 1200x700 mm : 1250x400 mm : 2400 mm : 1200 mm : 2800 mm : 5200 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the r ...

Spares in stock for frame 5 turbines

Key data: 320 mm, 350 mm, 600 mm

Stock number: 4032 HONING MACHINE Manufacturer: AZ, Type: CH 150 Vertical Year of Make: 2010 Specifications: Min. Max. Honing Dia. 25-180 mm Max. honing length 350 mm Max. workpiece size 1450 x 600 mm Spindle speeds 120 - 320 rpm Longitudinal movement of the grinding spindle 1100 mm Hydraulic. Automatic feed. 0-20 mm/min Length: 1610 mm, Height: 2000 mm, Width: 1180 mm, Weight: 1100 kg

: neu : ca. 4 Monate ab Auftragse : Italien : 103500 € : 1956.15 € : 150 to : 500 mm : 1250x1000 mm : 600 mm : 23 mm/s : 4 mm/s : 5.5 kW : 1520 mm : 1270 mm : 2500 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € on Request The data for this ad was created with ModulMWS - ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 104800 € : 1980.72 € : 150 to : 500 mm : 950 x 650 mm : 1200 x 750 mm : 750 mm : 100 mm/s : 5,5 mm/s : 165 mm/s : 11 kW : 2200 mm : 2200 mm : 3650 mm : 9500 kg : 254 bar : 32 to : 200 mm : 120 mm : 160 bar : 40 mm/sec. : 720x540 mm light curtain cushion manual and automatic working manual stroke adjustment by camshaft switch maintenance free self lubricating 4-fold ram guiding polster plate with T-slots according to ",CE", rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : .00775 : prompt, Zwischenverkauf v : 949.81 € : 1 : 150 mm : 40 mm : 33 kg Vice [felix] 2.0 150 Quick-action drill chuck B18 3-16 mm (accuracy 0.17 mm) Taper mandrel B18/MK IV Reducing sleeve MK III/MK II Reducing sleeve MK III/MK I The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 € : 193 € : 100 to : horizontal verschiebbar : 300 mm : 1570 mm : 220x160 mm : 5 mm/s : 10 mm/s : 2630 mm : 1000 mm : 2430 mm : 1600 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 412.8 € : 150 to : fix : 300 mm : 610 mm : 1520 mm : 9 mm/s : 5 mm/s : 10 mm/s : 600x1520 mm : 100 mm : 190 mm : 2630 mm : 1000 mm : 2470 mm : 3200 kg 2 guidings upper plate with T-slots table plate with T-Slots manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand control table height adjustable according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU284Y450 MakeVan Wijk & Boerma Type2NL 15A Mach.No.241596 Main Features MaterialStainless steel Motor0.37 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Without motor± 0,37—1,1 kW Inletø 23 mm Outletø 23 mm Eccentric Screw Pumps MaterialStainless steel 1.4306 (304L), Stainless steel 1.4571 (316Ti) Information Year of construction1992 Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace1,5 x 0,5 k Total height0,75 m Weight60Eccentric Screw PumpsVan Wijk & BoermaPumps > Eccentric Screw PumpsBrand > Van Wijk & Boerma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...

Mixer capacity: 1,500 litres (dry load) Concrete output: 1.0 m³ per batch Mixing drum diameter: 2,500 mm Application: Production of high-quality ready-mixed concrete PAS 1500 feed elevator consisting of: – the elevator frame for attachment to a Pemat mixer, standard inclination 60° – the elevator bucket with a capacity of 1,500 litres (max. 2,400 kg) Included – WÜRSCHUM additive scale – and mixer control unit

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 1193 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 1500 , , https://www.hamofa.com/catalog/product/view/id/281969, , = More information =, , Empty weight: 240.000 kg, Type number: KTTA50-G GENERATOR 1500KVA

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : fix : 1000 mm : 300 mm : 1020 mm : 610 mm : 9 mm/s : 5 mm/s : 10 mm/s : 8 mm : 600x1020 mm : 100 mm : 190 mm : 2110 mm : 1000 mm : 2450 mm : 2400 kg 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 € : 349.44 € : 100 to : 1500 mm : 300 mm : 7.5 kW : 2630 mm : 1000 mm : 2275 mm : 2500 kg : 1 : 680 mm : 1520 mm : 5 mm/s : 10 mm/s : 6 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand operating panel height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 € : 397.44 € : 150 to : 1000 mm : 300 mm : 11 kW : 2110 mm : 1000 mm : 2450 mm : 2400 kg : 1 : 610 mm : 1020 mm : 5 mm/s : 10 mm/s : 8 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position manuel and 2 hand working height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 080147 : prompt, Zwischenverkauf v : Slowakei : 26400 € : 504.24 € : 1 : 40 to : 1500 mm : X und Y Achse : 100 mm : 310 mm : hydraulisch : 38 l : 6 kW : 2000 mm : 950 mm : 1900 mm : 1800 kg : 420 mm : 1 : 10 mm/s : 12 mm/s : 40 mm/s : 0.02 +/- mm : 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.