traub a 15 used for sale

Load Weight Shelf: 20000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 150 mm height: 80 mm centre height: 105 mm weight of the machine ca.: 18 kg dimensions of the machine ca.: 300 x 80 x 200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 150 t workpiece diameter: 1000 - 6300 mm drum diameter: 500 x 300 mm feed: 100 - 1000 mm/min total power requirement: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 150 mm grinding wheel width: 20/40 mm taper diameter: 12,7 mm connected load frequency: 230 V engine output: 0,25 KW weight: 10 kg dimensions: 0,37 x 0,2 x 0,24 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 30 - 34 m/sec total power requirement: 4 kW weight of the machine ca.: 100 Kg dimensions of the machine ca.: 1,2 x 0,5 x 0,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 1220 mm dimensions of grinding wheel: 225 mm work table:: 150 x 400 mm Table tiltable up to: 90 Grad table surface area: 150 x 130 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 35 Kg dimensions of the machine ca.: 650 x 360 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 1500 Kg Magnetic field: mm weight: 0,045 t dimensions: 0,44 x 0,22 x 0,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,6 mm : 4 t blade length: 156 mm angle adjustable from - to: fest Grad table surface area: 450m x 305 mm total power requirement: Handbetrieb kW weight of the machine ca.: 95 Kg Dimensions (LxWxH): 530 x 380 x 480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 1700 x 485 x 950 mm weight: 116 kg : 6 St. weight: kg weight max. in kg: kg Internal dimensions of the top drawer 1390 x 360 x 60 mm. Internal dimensions of the right second la 910 x 380 x 90 cm. Internal dimensions of the left 2nd, 3rd and 4th la 440 x 380 x 90 mm. Internal dimensions of the left fifth la 440 x 380 x 210 mm. Internal dimensions of the shelf behind the doors 940 x 450 x 390 mm. Wheel dimensions 150 x 40 mm. The thickness of the solid wood panel 40 mm. Packaging dimensions 153 x 49 x 96 cm. Weight 116kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 12000 kg Loading weight per level: 2000 kg Number of load levels: 6 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: 2,3 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 28000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 14000 kg Loading weight per level: 2000 kg Number of load levels: 7 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: 2,3 x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 24000 kg Loading weight per level: 2000 kg Number of load levels: 2 x 6 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 10000 kg Loading weight per level: 2000 kg Number of load levels: 5 Stk. Recommended material length: 3000 mm Column width: 1500 mm Shelf height: 2440 mm dimensions: 2,3x 0,9(1,35) x 2,45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The Fryma Koruma Delmix MZM/VK-150 is a vacuum mixing system. Products with different viscosities can be dissolved, mixed, dispersed and emulsified. At the beginning of the process, the vacuum pump is switched on and evacuates the process vessel. Liquids and dry products are fed into the mixing chamber of the homogenizer under vacuum via the product inlets. The homogenizer is the heart of the process plant. The fast-running homogenizer and stator system disperses and homogenizes the liquid and medium-viscosity products. The pumping action of the homogenizer conveys the product into the vessel via the circulation line. A slow-running scraper agitator with flexible scrapers rotates inside the vessel. The scraper agitator is responsible for circulating and mixing the product. The scraper blades move over the inner surface of the vessel wall. In this way, they prevent that the product sticks ...

MOBILE MIXER-MINCER, WOLFKING TYPE: SFG 150/100 + PORTIONER TYPE: PD200 Technical description: Material: Stainless Steel Mixer, type: SFG 150/100 Serial number: 59440, year: 1998 Power supply: 380 V, 50 Hz, 7.8 / 9 A, 3.7 / 4.4 kW Weight: 350 kg Outlet diameter: ?100 mm Mixer mill size: 1310 x 600 x 1500 mm Foot control Portioner, type: PD 200 Serial number: 59441, year: 1998 Power supply: 220 V, 50 Hz, 0,4 A, 35 kW Weight: 100 kg Band width: 200 mm Working width: 180 mm Dimensions: 1300 x 600 x 1140 mm

When 3D printing with GDP, the object is immediately cured using UV light, resulting in a high printing speed., Massivit is known for its large format 3D printers, which are particularly suitable for retail marketing, entertainment, event planning and architecture., Applications for which the Massivit 1500 is particularly suitable:, 1. Retail Marketing and Decoration: With the Massivit 1500, companies can create customized and elaborate window displays, POS displays and in-store decorations., 2. Event and exhibition design: For event and exhibition designers, the Massivit 1500 offers the opportunity to create personalized and interactive elements that can attract visitors and enhance the event experience., 3. Architecture and model making: The Massivit 1500 can be used to create detailed architectural models that can be used for presentations and to visualize projects., 4. Large prototyp ...

Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

A Neopost inserting machine is available. Inserting capacity: 4500 letters/h, inserting capacity with 2 sheets (collected): 3400 letters/h, envelope feeder capacity: 400, inserting liquid tank: 1, document feeder capacity: 500 sheets. Envelope thickness: 4mm, min. document dimensions X/Y: 76mm/140mm, max. document dimensions X/Y: 228mm/406mm, min. envelope dimensions X/Y: 89mm/152mm, max. envelope dimensions X/Y: 165mm/264mm. Fold types: Spiral fold/Z-fold/single fold/double fold/parallel fold/non-fold. Machine dimensions X/Y/Z: approx. 3600mm/550mm/600mm, weight: approx. 400kg. Including the underframe (piece of furniture - green). Documentation available. On-site inspection is possible. Expected to be available from mid-May 2025.

Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

A semi-hermetic condenser unit including compressor and two ceiling evaporators is available. 1) Condenser Bitzer KE-151, year of construction: 2001, leak test: 2023, refrigerant: R134A, cooling capacity: 16kW, suction diameter: 54mm, pressure diameter: 28mm, liquid receiver: F302H, volume: 30l, max. operating temperature: 120°C, max. operating pressure: 26bar. 2) Two ceiling evaporators Günther DHN051C/27, max. operating overpressure: 28bar, max. operating temperature: 100°C, volume: 29l, rated output: 18.9kW, area: 102m², air volume flow: 1124m³/h, throw distance: 2x14m, extraction capacity: 7.2kW. Fan type: VT0139, fan diameter: 500mm, speed: 1380rpm. Machine dimensions X/Y/Z: approx. 2500mm/1600mm/450mm. Documentation available. On-site inspection is possible. Individual sale possible.

Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible.

Sweeping width: 1250mm, Sweeping brush: Roller brush, drive: hydrostatic, oil capacity: 25l, power: 6.7kW, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1400mm, weight: approx. 1000kg, operating hours: 1063h. On-site inspection is possible.

length: 400 mm width: 150 mm total power requirement: 24 V weight of the machine ca.: ? t dimensions of the machine ca.: 800 150 180 m Sine table with 24 V electromagnetic plate, swivelling over the longitudinal axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

work table:: 290x130 mm table - tiltable +/-: 15 ° cross adjustment: grinding wheel diameter: 150 mm turning speeds:: 1 dimensions of the machine ca.: 780X630X1100 mmxmmxmm weight of the machine ca.: 185 kg coolant: komplett The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pulling force - max.: 25 t max. ram stroke: 1500 mm max. workpiece diameter: 630 mm cutting speed: 1,5 - 7 m/min return speed: 7 - 25 m/min workpiece height max.: 360 mm tool diameter: 130 mm Shank diameter: 70 mm table surface area: 600 x 600 mm Control: distance between columns: 635 mm total power requirement: 18,5 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 1,1 x 1,7 x 5,2 m Machine was hardly ever used, not even in single-shift operation. - 3 broaching positions, can also be used individually - Hydraulic drive - without tools or other accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -

Frame made of full stainless steel with floor scale, also made of stainless steel max. 1500 kg, for filling big bags

A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible.

Turning module/pile turner Rachner STM 150; Condition unused; Format 530x430mm; Load capacity 150kg; Max. Stacking height 800mm, min.320mm. Turn modul/pile turner Rachner STM 150; condition never used; size 530x430mm; lifting capacity 150kg; max.pile hight 800mm, min.320mm.

We can offer TMT FDY spinning lines, manufactured by TMT, Japan in 2012, Melt spinning lines,from melt PET inlet to winder.each inlet spuuly 3 beams, each beam has 2 positions, spinneret diameter 100mm, pitch 1400mm, redial blowing quenching, each has 4 hot gidets, 230X450mm, TMT ATi-615/32 winder, twins winder,chuck 1500mm,

Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

De uitrusting bestaat uit: - 3 decoilerstations met een capaciteit van 5 ton - Ras richteenheid - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen - Ras vouwunit voor vierkante luchtkanalen

Manufacturer: BAC (Spain) Model: F-150-10-150 Type: Ball Valve Size: 6" (DN150) Pressure Rating: 150 lbs (ANSI Class 150) Material: • Valve Body: CF8M Stainless Steel (AISI 316 equivalent) • Ball: 316 Stainless Steel • Gasket: PTFE (Teflon) Connection: ANSI Flanged Ends

grinding diameter: ca. 360 mm grinding length: 1500 mm serial number: 12013 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixers/agitator tanks Manufacturer: Hebold Capacity 1500 litres Stainless steel, upright, single-walled Flow breaker Cip Ball

BATTENFELD EXTRUSION LINE FOR PVC, EVA,.., including:, PAPENMEIER MIXER, type TSEH 200/KMSU 400 L, construction year 1991, Electrical power heating 30/35 kw - Cold 6,0/7,5 kw, including supporting structure, Total dimensions LWH : 2.4002.6502.550 mm., Weight : about 3.000 kg., BATTENFELD EXTRUDER, metal detector, feeding unit, barrel with screw 150 mm., 7 heating areas, 5 cooling fans, Assea 110 kw Drive, vacuum degassing pump, screenchanger 2x 90 mm.Ø, heating 4,0 kw, Gneuss temperature probes, hydraulic power station 2,3 kw, air pelletizer, variable speed, self adjusting knives, 1,5 kw drive, adjustable pressure, extra (Bausano cutting system with inverter), pellets cooling unit, vibrating screen with one air turbine on each side, Constructed in 1989, Documents available, offered AS IS WHERE IS or CHECKED., CUTTING: AIR

LVD PPCB 150 ton x 4100 mm CNC Capacity: 150 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 150 mm Max distance between table -- ram: 350 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 90 mm/sec Working speed: 7,3 mm/sec Returning speed: 56 mm/sec Electric motor (power): 7,5 kW

Height from floor to lifting hook: 5 meter Horizontal movement of hoist: 6 meter Kind of: jib crane Capacity: 1500 kg

Vertical turning lathe SEDIN 1512 CNC CNC control- Eastern origin Table diameter: 1120 mm Max work-piece: -Diameter: 1250 mm -Height: 1000 mm -Weight: 3200 kg Table speeds range per 1 min: 5-250 Tool dimensions: 25×40 Max horizontal travel of the vertical ram: 775 mm Max vertical travel of the vertical ram: 700 mm Max horizontal travel of the horizontal ram: 630 mm Max vertical travel of the horizontal ram: 1000 mm Max turning angle of the vertical ram: 45 degree Cross rail: -Travel: 660 mm -Speed: 400 mm/min Main motor power: 30 kW Overall dimensions: 2750×2975×4100 mm Machine weight: 15700 kg

CNT orbital sander mod. LOR 150 - CE compliant - Matr. 17002 -Diam. Min. max. machinable 10-45 mm.ù - Hp3 engine - Year 2017

SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support

SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg

Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible.

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.