traub a 15 used for sale

turning diameter: 440 mm turning length: 1500 mm control: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller/Heat pump YORK YLHA 150 TP 380T 145 kW / 150 kW Cooling capacity: 145 kW / 41.23 tons (12/7 — 35°C) Heating capacity: 150 kW / 42.65 tons (40/45 —7°C) Year of manufacture: 2017 Options: Heat pump. Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP182KCE-TFD-455 (scroll) + 1 pcs. Copeland ZP182KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DPL40/150-3/2-IE2, buffer tank 152 l. Dimensions: 3.8x1.1x2.3 m. Weight: 1535 kg Working hours: 14618 / 19252 / 15204 / 19621 h. Condition: Good

Tetra Pak A3 Flex 1500ml Gemina TGA Filling Line For Sale Item #: Usm-141 Category Tetra Pak A3 CF/Flex Tetra Pak A3 Flex 1500ml Gemina Filling Line For Sale Filling machine Tetra Pak A3/Flex TGA1500Sq, in set with accessories, and Headspace by Injection kit, Year of manufacturing 2009 & Working hours 2427 Cap Applicator CAP 30/Flex, with HeliCap27 kit, Year of manufacturing 2008 & working hours 2631 Accumulation system ACHX-0400, Year of manufacturing 2008 & working hours 2404 Cardboard Packer TCBP70, Year of manufacturing 2003 & Working hours 8654 Set of conveyors TPC23 (35 meters with 3 drives) and spare parts for connection of components of the filling line, with dry lubrication system Line Controller LC 30, Year of manufacturing 2008 Condition: The line is currently in Production, Technical inspection can be arranged on request.Overall conditions of Equipment: Good.

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

220 V, 9.6 A, 2000 W MAXIMUM CHAMFER LENGTHS MAXIMUM CHAMFER LENGTH STEEL 400 N/MM² 15 mm MAXIMUM CHAMFER LENGTH STEEL 600 N/MM² 9 mm MAXIMUM CHAMFER LENGTH STEEL 800 N/MM² 6 mm RADII SMALLEST RADIUS 55 mm GENERAL WORKING SPEED 2 m/min STROKE RATE AT NOMINAL LOAD 370 1/min RATED POWER 2600 W SHEET THICKNESS 4 mm - 160 mm WEIGHT WEIGHT WITH HANDLE, WITHOUT CABLE 16.5 kg As good as new. Condition

; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349

Used first-class renovated extrusion recycling plant EREMA for the processing of polyethylene and polypropylene. Capacity of approx. 1,100 kg/h. WITHOUT DEGASSING. Processing of only CLEAN material; without printing ink. Auch Folien + Technik e. Kfm. D-73728 Esslingen Phone +0049 1577 5329827

Extrusion recycling machine EREMA 1514T for processing of CLEAN unprinted polyethylene and polypropylene, WITHOUT DEGASSING, no converting of printed materials. capacity up to approx. 1.100 kg/hr. The machine is refurbiushed in ecellent condition. Auch Folien + Technik e. Kfm. D-73723 Esslingen phone +0049 1577 5329827

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

Deutz MWM Gas Power Generator Set 150 kVA - - - - - Engine: - Deutz / MWM (Germany) - Model: G234 V12 - 12 cylinders - Gas (natural gas) - Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: AvK (A.van Kaick, Germany) - 150 kVA - 230 / 400 volts - 50 Hertz - - - - - Condition: - Used - The device comes from a waterworks and was installed there for emergency power protection / for occasional use - The engine was cooled via an external cooling circuit - - - - - Transport: - Germany-wide transport is possible for an extra charge - To be able to quote an exact freight price, please send us an inquiry with your zip code - - - - - Price and payment: - Payment: Prepayment - An invoice with VAT will be generated - - - - - Other: - Sale of used machines in their current condition to tradespeople under exclusion of any warranty

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

De-stoner Buhler MTSB150, overhauled, T12 / 14 hour,

Kemper vat wagon with boiler Kneading boiler vat for Kemper spiral kneader SP 150 AL Stainless steel boilers with handle for a maximum of 150 kg flour for max. 240 kg dough Stock: 12 pieces

; Gross weight [kg]: 1650; Engine: Cummins 6BTAA5.9-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 185

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

; Gross weight [kg]: 1666; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

Compact and reliable lifting solution for workshops and production environments The BPL Flexiheffer jib crane is an ideal solution for safely and efficiently moving loads up to 150 kg. The crane is designed for intensive daily use and offers a large working range thanks to the smooth jib arm. Technical Specifications Brand: BPL Type: Flexilifter 150‑R4‑L‑1500‑0 Year of construction: 2003 Height 2, 872 mm, width : 500 mm, length 1,878 mm Maximum lifting capacity: 150 kg, lifting stroke 1,500 mm Swing radius: 4,000 mm Construction: Steel column + swing arm Operation: Manual, smooth running Condition: Well-maintained, fully functional Connection: compressed air min. 6 bar, 700 NL/min Key Benefits Safe and ergonomic working with light to medium loads Compact design – ideal for workshops with limited space Smooth swivel movement for fast and accurate positi ...

Spiral kneader Kemper SP 150 aL - 2 extendable boilers - after general overhaul - manual control - new electrics - 240kg dough - automatic boiler veriglung Price with delivery on request, We can take other machines in billing

RS Simulators Here we offer a temperature test chamber. Air-cooled Temperature range: -50°C to +100°C Test room dimensions: 530 mm x 630 mm x 530 mm (WxHxD) External dimensions: 820 mm x 1750 mm x 1300 mm (WxHxD) Current consumption: 13.5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Aspirator or grain pre-cleaner RUBERG RVS 150 Good condition! With leak aspiration Reserve shed available At a special price directly from the construction site. The machine is located in a recently decommissioned plant near Düsseldorf.

Spiral kneaded Kemper SP 150 AL Bakery dough kneading machine spiral kneader Kemper SP 150 AL with 2 stainless steel boilers functionally tested and cleaned immediately available in stock for sale. The machine is automatic with 2 speeds and time wasured.Kesse and mixing tool are made of stainless steel. -with automatic boiler locking -2 automatic timers -2 speeds -for max. 150kg flour / max. 240kg dough -with flour dust cover -with 2 boilers -Stainless steel boiler and spiral -380 Volt 50Hz

Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

-Boiler lift tipper from Kemper model HK 150 -with stage for Kemper President Kessel -Height approx. 198cm -Tipping height approx. 195cm

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

UNUSED STERLING SIHI GMBH CBSD 040160-150 CBBK31R000 CENTRIFUGAL PUMP

Construction 1976 Capacity 150 l , all Complete , ready for immediate use

Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 150 mm -Dimensions: 425/240/H120 mm -Weight: 40 kg

Rotary piston vacuum pump manufactured by Leybold . E150 model. With an oil capacity of 5.4 L and a noise level: 76 dBA

Lifting tipper Kemper HK 150 -for boiler spiral kneader Kemper SP 150 A and AL -Load capacity 1000kg -Height 204 cm -Tipping height 190cm -can be driven on castors

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: TAE, Transformer -Type: 6 D 150/50-18 -Number: 2 pieces available -Price: per piece -Dimensions: 130/120/H190 mm -Weight: 8.8 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Specifications: - TIG – DC + electrode welding - Welding current infinitely adjustable for TIG welding of 5 A-10.0 V to 150 A - 22 V 35% ED 100 A 100% ED - Connection 220 V / 50 Hz 15 A - with: - 2 stroke 4 stroke - function - HF ignition - Welding current descent setting - Gas pre-flow regulation - Gas afterflow regulation - Hose package 4.5 lfm, lightweight design - Ground cable - Pressure reducer - Space requirement approx. W 200 x H 300 x D 500 mm - Weight approx. 10 kg - Transport trolley with gas cylinder slot W 550 x H 900 x D 560 mm - Weight transort van approx. 10 kg

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Kracht -Type: TK21/150 -Power: 0.1 kW -Speed: 2800 rpm -Connection: 220/380 volts -Dimensions: 160/240/H340 mm -Weight: 10 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate: steel , with a vice -Width: 1500 mm -Length: 2005 mm -Height: 845 mm -Plate thickness: 45 mm -Plate: is on steel frame -Vise: clamping jaws 110 x 15 mm -Transport dimensions: 1525/2230/H990 mm -Weight: 1250 kg

workbench, work table, assembly bench -with: bench vise -Width: 1500 mm -Depth: 730 mm -Height without vise: 920 mm -Clamping jaws: 115 x 20 mm -Wingspan: 160 mm -Worktop thickness: 40 mm -Drawer: 1 -Weight: 85 kg

Workbench, work table, assembly bench, electrician workbench -without: vise -with: Electrician test board -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Quantity: 5 pieces available -Price: per piece -Weight: 110 kg

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Single-acting: cylinder -Piston diameter: approx. 60 mm -Piston rod: Ø 45 mm -Stroke: 1530 mm -Cylinder comes from a Still forklift mast -universally applicable: -Number: 1x cylinder available -Price: per piece -Dimensions: 80/80/H1800 mm -Weight: 36 kg/piece

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Complete the accessory package for your extraction / extraction system Hoses, sockets, flex arm and suction nozzle have always been part of our standard range. From now on we complete this package with the hose feedthrough Available now: Hose feedthrough machine wall for suction Dimensions: 150 x 150 mm Ø 76 nozzles on both sides Article-No. MA-201150

Moving bezel, moving bezel, bezel, steady rest, lynette -max. passage: Ø 155 mm -Tip height: 265 mm -Technical drawing: in the photos -Dimensions: 445/60/H485 mm -Weight: 18 kg