transfer system used for sale

Metal detection system MesutroncType Metron 05 CO 900 incl. conveyor belt Year of manufacture 2011. Metal detection coil diameter 900 mm, incl. durit tube. Belt conveyor length approx. 7,100 mm, with tapered roller

Key data: 50 m², 1160 kg, 3920 mm

Test mark H3 / DGUV HO 213001 Max. volume flow: 10,000 m³/h Nominal volume flow: 6,910 m³/h, 2,550 Pa Connection diameter: 350 mm Filter area: 50 m², dust class "M", AWN 16 cone Motor power: 2 x 5.5 kW Filter regeneration: pneumatic-mechanical Sound pressure level: 69 dB(A) Built according to EN 16770 Residual dust content less than 0.1 mg/m³ incl. control cabinet with 2 frequency converters incl. 2 forklift consoles

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to

ago congelo Chiller 130 -8 26 95 82 absorption chiller from 2015, was used as a chiller for a 372 KW CHP plant. unit with control, Ammonia 370 kg, water 290 kg, 16 bar, 680 KW recooling capacity Manufacturer: AGO AG Energie + Anlagen Model No.: ago congelo 130 -8 26 95 82 Serial Number: 62669 Heating capacity [KW]: 500 Cooling capacity summer [KW]: 180 Cooling capacity winter [KW]: 235 Recooling capacity [KW]: 680 Flow rate [m3/h]: 34,09 Type: Absorption Refrigeration System Refrigerant: ammonia, 370 kg Solvent: Water, 290 kg Pressure [bar]: 16 bar Year of Make: 2015 Weight [kg]: 5,000 Dimensions LxWxH [cm]: 5.35 x 2.55 x 3.50

Belt width gross: 965 mm, Belt width net: 905 mm, Belt length: 737 m, Belt surface: 600 m2, Tiers: 37.5 pcs., Product gap: 55 mm, Capacity: 2300 kg/hr (ready meals), Infeed height: 900 mm, Infeed length: 2640 mm, Outfeed height: 6300 mm, Refrigerant: R717, ammonia, Cooling power: 325 kW, Power: 3 x 400V, 50Hz, 67kW, Dimensions: 13840 x 7800 x 7300 mm

Belt width gross: 760 mm, Belt width nett: 715 mm, Tiers: 43 pcs., Product gap: 105 mm, Link height: 120 mm, Belt length: 563 m, Infeed height: 6000 mm, Outfeed height: 740 mm, Refrigerant: R717/NH3/ammonia, Evaporator: 3100 m2, Cooling power: max. 496 kW, Power: 3 x 400V, 50Hz, 38,5kW, Dimensions: 8850 x 4800 x 7000 mm

KOMPAKT” RELEASE AGENT MIXING SYSTEM Machine type: Mobile release agent mixing system Model: Aquapresso ADF 18.10 Operating pressure / release agent pressure: 6 bar Power: 1.5 kW Control voltage: 24 V DC Rated voltage: 240 V AC Rated current: 6 AControl system: Siemens Simatic HMI Features Compact, mobile design Stainless steel mixing tank with 100 l capacity Flow measurement for water and release agent Fully flow-through pressure accumulatorSpecial features: The mobile Kompakt” release agent mixing system allows the water-to-release agent mixing ratio to be set and monitored via the PLC control system. The mixing ratio is continuously monitored using volume sensors for water and release agent concentrate. Thanks to its compact design and integrated 100-liter stainless steel tank, the system is particularly suitable for flexible industrial applications. Lot No. 4 Item  ...

Descending spiral, infeed at the top, outfeed at the bottom, Belt width gross: 920 mm, Belt width nett: 880 mm, Tiers: 23 pcs., Link height: 80 mm, Product gap: 65 mm, Length per tier: 17.8 m, Belt length: 409 m, Refrigerant: NH3, ammonia, Evaporator size: 1800 m2, 975 L, Cooling power: 250 kW, Power: 3 x 400V, 50Hz, 64 kW

Stainless steel floor, central lubrication system, Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 40 pcs., Link height: 80 mm, Product gap: 65 mm, Belt length: 820 m, Max belt load: 18 kg/m2, Infeed height: 925 mm, Outfeed height: 4500 mm, Refrigerant: nh3, ammonia, Cooling power: 400 kW, Evaporator surface: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 13050 x 9450 x 5300 mm

- Compact bread roll line - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Rollprofi - Suitable for the production of cut rolls, long-rolled rolls - 4 rows - Hourly output for 4 rows: 3750 pieces /h - Pre-proofing time: 6 minutes - Pre-proofing time between input and side discharge belt and 2000 pieces per piece - Pre-proofing time for double cut: 3 minutes - Pre-proofing time between input 6 minutes and long scooters: at max. power - Year of construction 2018 - Outer dimensions: Width: 305cm Depth: 115cm

used compact bread roll line König Eco Twin 9000 K6-SCHN6/B Classic Rex immediately available in stock for sale. -6-row roll line -König Eco Twin 9000 K6-SCHN/B Classic -with King Classic Rex head machine - Max. hourly output: -Year of construction 2011

ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...

A Behn bag filling machine for powder and flakes is available. Accuracy class: Gkl X(1), filling material: resin powder, verification: 2019, filling principle: screw filling, filling nozzle diameter: 60mm, weighing range: 2kg-32kg, scale interval: 20g, inlet diameter: 350mm, flange diameter: 520mm, machine weight: approx. 1000kg. The control system of the machine has been overhauled. Including approx. 4000 bags and spare parts for the control system. An on-site inspection is possible.

A Haver & Boecker bagging system for valve bags with a turbine system for powdered bulk materials is available. Weighing system: gross weighing, filling material: phenolic resin, bag layers: 2-4, filling weight range: 25kg-30kg, filling capacity: approx. 150-175bags/h, explosion protection class: EEx de II C T6, pack silo height: 800mm, load cell: Z3H2-A, certification valid until 2026. Documentation available. An on-site inspection is possible.

ECKERT ONYX CNC plasma cutting machine with Kjellberg Q1500 and Dual Flex 3D For sale is a high-quality CNC plasma cutting machine ECKERT ONYX with a working range of 2,500 × 2,000 mm and additional raceway extension. The system is equipped with a powerful Kjellberg Q1500 plasma source, automatic gas console, Dual Flex 3D bevel head, Donaldson extraction and Finest Cut V7.1 CAD/CAM software. The machine enables precise plasma cutting as well as automatic 3D bevel cutting for weld preparation. Thanks to automatic gas management, modern control technology and extensive safety equipment, the plant is ideal for steel construction, mechanical engineering, container construction and contract manufacturing. Highlights: Working range 2,500 × 2,000 mm Kjellberg Q1500 Plasma System Dual Flex 3D Bevel Cutting Head Donaldson Suction DFPRE 6 Cyclopeel 6300 Automatic gas console Fin ...

Primus head machine, 4 to 6 rows Hourly output : approx. 7200 lt. manufacturer depending on weight. Realistic hourly output 6,000 pieces Weight range: 40-100gr The Kövy KA 1/6 is a high-performance, six-row sliced roll line for artisanal bakeries, which is traditionally often combined with a Fortuna head machine (KM 6). It processes dough pieces precisely—often in the weight range of 40 g to 110 g—and is particularly known for its wide variety of products (from classic sliced rolls to stamp and pointed rolls). Item condition: in operation, fully functional Availability: immediately Viewing: by arrangement Original price in 2022: €400,000.00

Condition: used,Remarks: Manufacturer: Sera Type: Suction lance SL-02 Length: 1000 mm Immersion depth: 980 mm Volume flow: 200 l/h Manufacturer: Sera Type: Diaphragm Transfer Pump Power: 0.37 kW Volume flow: 120 l/h Permissible back pressure: 8 bar incl. digital level scale

An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible.

FROGERAIS dosing turbine, Engine: Type B F 80 b: 0.96 kW, Turbine diameter (mm): 900, Turbine depth (mm): 630, Dimensions (mm): 1530x1250 H2600

Refurbished cable granulation system for mixed cables. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Cutting unit with segment knives for low power consumption and good material digestion. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. The machine can be viewed and tested. more information at Recyclinganlagen.info

Little used mixed cable recycling plant. Workshop tested with 12 months used equipment warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. The machine can be viewed and tested. more information at Recyclinganlagen.info

As good as new cable pelletizing system for mixing cables up to approx. 120 kg/hour. Demo machine from stock with 24 months warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. Pictures will follow. The machine can be viewed and tested. more information at Recyclinganlagen.info

Small cable recycling plant for 80 to 100 kg/hour. Built in 2012, workshop checked and tested. Only 6 kW connected load. 3-fold separator adjustment for clean copper granules immediately available. The facility can be visited and tested. More information at Recyclinganlagen.info

This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details.

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible.

dimensions 820x540x70 capacity 1 to daylight 2337 mm

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

TECHNICAL DATA: Machine type: Four Side Seal, Transverse Zipper Sealed, Side Seal Pouch Making Machine Application: production of high-quality laminated flexible packaging pouches with zipper and punching options. PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3" and 6" Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Inst ...

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - .ucymachines/ Contact us at - sales@ucymachines

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Consisting of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories FBRM® [Focused Beam Reflectance Measurement] is a quantitative real-time measurement that tracks the rate and degree of change in particles, particle structures, and droplets as they are actually present in the process. In-line FBRM measurement® allows engineers to quickly link the dynamics of the particle system to the processing conditions. Measure particles and droplets in real time DescriptionSample OD: 9.5 or 14mm Probe length: 91 or 206mm Drive: Electric Bearing: Mechanical Lab/Plant: Lab Field unit: Stand-alone Temperature range: -20 to 90°C (standard); -90 to 120°C (optional) Pressure: 10 bar (stan ...

€ 2950 net Diatomaceous earth filter from MAG, Made in Germany 3sqm, top condition. Filter area 3 sqm, horizontal screens, residual filtration, product pump. Complete with stainless steel dosing tank. Illuminated sight glasses, integrated agitator, adjustable dosing pump. Ready to use.

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

Including:, Goedhart BV evaporator, Type: LLK.s 411m², Year of construction: 2010, Capacity: 135 dm³, Refrigerant: NH3, Working pressure: 22 bar, Test pressure: 32 bar, Weight: 770 kg, Belt width nett: 940 mm, Tiers: 3, Belt length: 5800 mm, Power: 3 x 380V, 50Hz, 0.37kW, Dimensions: 7200 x 1400 x 2900 mm, Weight: 2850 kg

Offered is a Ruma cleaning centrifuge system with cooling unit and pump system for cleaning cooling lubricants, grinding oils, emulsions, wash water and process fluids. Max. achievable cleanliness level: approx. 1µm, suitable media: oils, emulsions, cooling lubricants, wash water, process fluids, max. rotor speed: 3620rpm, rotor diameter: 310mm, max. solids capacity: 12kg, main motor power: 2.2kW, filter aids: not required, separation principle: solid-liquid separation by centrifugal force. Machine weight: 400kg. Documentation available. Inspection possible by arrangement.

A compact Vomat fine filtration system for grinding oil and coolant with full-flow filtration using the backflushing process and a cooling unit is available. Filtration capacity: 240l/min, Filtration fineness: 3µm-5µm, Filling capacity: 500l, Machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, Weight: approx. 500kg. Documentation available. An on-site inspection is possible.

AGFA Avalon N 36-50 (Screen PT-R 24000 S) - VLF year 2013 size 2100 x 1600 mm plate processor G&J Quartz III 150 Bridge Stacker in stock

Stock number: D1245, In stock: Yes, Amount in stock: 1 pc., Item: Non-driven roller conveyor - Flexi conveyor, Standing: On wheels , Castors: Breakable in direction of travel and rotation, Rollers: Ø 48 mm wheel axles - 8 wheels per axle, Dimensions: L 1150/4000 x W 400 x H 695/995 mm, Manufacturer: SOCO SYSTEM A/S, Type: Flexi conveyor

Bodor AQU3000 Handheld Laser Welding Machine – 3000 W For sale is a Bodor AQU3000 laser welding machine with 3000 watts of laser power. The device is located in Germany and is available immediately – no long delivery times or waiting times for an import. The welding machine is still in its original packaging. The AQU3000 combines welding, cutting and, if necessary, cleaning in one compact system. Modern fiber laser technology achieves high-quality weld seams with low distortion and significantly reduced post-processing effort. Compared to classic MIG and TIG methods, significantly higher working speeds are possible. Technical data: Manufacturer: Bodor Model: AQU3000 Laser power: 3000W Fiber cable length: 10m Operating voltage: 380 V Cooling: Water cooling Welding thickness mild steel: up to 8 mm Welding thickness stainless steel: up to 8 mm Cutting fun ...

A stationary Rippert filter and dust extraction system is available. Filter sections: 4, Filter elements: filter bags, Filter bag dimensions 1 X/Y: 6603mm/1775mm, Filter bag dimensions 2 X/Y: 6603mm/1200mm, Filter area 1/2: 45m²/60m², Regeneration drives: 4, Regeneration drive power: 1.1kW, Rotary valve: ZS 7.5, Motor power: 0.55kW. An on-site inspection is possible.

A solvent cleaning system AMA Universal is offered for cleaning, degreasing and drying metal and plastic parts. Inspection by appointment possible. Number of monitoring channels: 8, Solvent fill quantity: approx. 160l, Solvent weight: approx. 194kg, Tank volume: approx. 105l, Max. basket load: 80kg, Cycle capacity: up to 80kg/cleaning cycle, Cycle time: approx. 20min, Working chamber diameter: approx. 450×610mm, Loading opening diameter: approx. 450mm, Drum diameter: approx. 510mm, Drum depth: approx. 600mm, Air flow rate: 230m³/h, Steam pressure: 5bar, Steam temperature: 149°C, Water pressure range: 3-5bar, Compressed air connection: 6-7bar, Control: PLC. Inspection by appointment possible.

A Schirmacher high-frequency sliding-table welding machine is available. Table dimensions X/Y: 750mm/550mm, max. pressing force: 20kN, generator output: 10kW, operating frequency: 27.12MHz, control system: Siemens. Documentation available. An on-site inspection is possible.

Manufacturer: Durst Type: D-SLK 12 Diagonal, AIRSEC Vario 1/2 Year of manufacture: 2008 Heating medium: liquid gas propane, gas blower burner for natural gas E Dimensions - Spray cabin interior: 4000 x 2400 x 2550 mm - Container exterior overall: 6000 x 2500 x 2800 mm - Aggregate room interior: 2400 x 1850 x 2300 mm Air Performance - Fresh air supply: up to 10000 cubic meters per hour, motor rating 2.2 kW - Exhaust air: up to 10000 cubic meters per hour, motor rating 2.2 kW - Air change rate: up to 408 times per hour - Exhaust discharge velocity: approximately 14.1 to 17 m per second Heating - Maximum heating output: 90 kW - Maximum circulating air temperature for drying: up to 75 to 80 degrees C - Average annual natural gas consumption: approximately 3.4 Nm3 per hour - Maximum consumption at 90 kW: approximately 9.5 Nm3 per hour Filtration - Pre-filter: bag filter, filter cla ...

An entire system is being sold! The collection consists of Tango tapping, Ilapac Carrera 500 PC flow-wrapping machine, Mettler Toledo Chekweight and Espera labelling. The system is fully functional and serviced

- Electrical control see PDF file provided for download - Layout plan see JPEG image - Building freedom is given - Deployment of the system is unproblematic from a spatial point of view Control: Siemens S7 Tanks: 3 x 500 ltr Lye tank 500 ltr.: insulated/heatable Acid tank 500 ltr.: with adjustable spherical feet Buffer tank 500 ltr.: with adjustable spherical feet Location: Bavaria/Upper Franconia Dismantling: by buyer or at extra cost Media segregation: by buyer Material: Stainless Steel Original price: €41,000.00

Fortuna Primus K4 – Roll line 4 rows – Stüpfler + deposition + GEK Year of construction 2011 Dough part & knitting machine Condition: fully functional, directly from operation Use: Round rolls e.g. Kaiserweck, plait, Salzweck, wheat & mixed dough • Weight range: approx. 40-110/120 g • Hourly output: approx. 4,800 pcs./h • Effective room height: approx. 10–35 • Casting speed: Scale 0-30 • Hopper volume: 20–25 kg • Dough yield: TA 160–165 • Connected load: approx. 1.5 kW • Machine weight: 650–700 kg • Settlement: for 60×80 cm trays (58–78) _____ Facilities • Fortuna Primus K head machine • 4 rows • GEK pre-proofer to match the line • Stüpfler/Stempel Sets: Kaiserbrötchen, Zopf, Salzweck • Complete cancellation • Immediately ready for use • In use until the end • Clean, well-maintained, regularly serviced • No  ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

Spray System spray.xact food 1000 mm Spray Grease System Precise, cost-effective, and highly reliable: Meet spray.xact, the next generation of contact-free spray lubrication. Designed for ultimate flexibility, this system applies oils and other media with pinpoint accuracy using a high-frequency valve and a single-substance nozzle. Unlike traditional compressed-air systems, spray.xact eliminates unwanted oil mist entirely—meaning you can skip the expensive extraction systems. The result? A low-wear, low-maintenance, and highly economical solution perfect for stamping, forming, fine blanking, and rolling mills. Technotrans offers tailored configurations to fit your exact needs: - spray.xact b: A flexible, modular design built for easy retrofitting in tight spaces. - spray.xact c: A compact, highly service-friendly unit enclosed in a robust stainless-steel housing. Both configuratio ...