transfer system used for sale

A-05. Gas Separation System (F-608) Partial system, 1 tank type OKFA 900.140.1.10°/900.MZ.C, Built: 2017 Complete system (control, etc.), functional, cleaned Manufacturer: Otto Klein Filtertechnik Apparatebau/Engineering GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.2m; Length approx. 5.0m; Mass 7.7t; Volume 2400 l; 140 bar; Maximum filling mass: 2377 kg Find more here - / Contact us at -

Lift-tilt system height: 8,20m. Tilt system inlet dimensions: 1100 x 1200 x 1750mm Euromorm.

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

SNA-10. 2 Emergency Power Systems - Complete System Manufacturer: Heinkel Aggregatebau GmbH Technical Data: - Heinkel SET HE500/396; 500 kW; 400 V; 722 A; 1500 rpm - IP 20, brushless synchronous machine AEG Rotaduct - 2 units Type DKBH4407/04; 3-phase AC; 280 kW; 400 V/404 A, 50Hz - 1500 rpm; 50Hz; cos φ 0.8; Built: 1991 - Diesel generator by MTU, Diesel tank: 1 unit, capacity: 1425 l - Starter battery; 2 units Hoppeke power HC 125300 - Dry cooler by Alfa Laval; 2 × 6 fans; 793.52 kW; each 50 m³/h - Ventilator: 90460 m³/h; Two-circuit cooler; Rooftop installation Find more here - / Contact us at -

for 100-600 g , 350 - 1000 g

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

Available quantity: 2 systems Year of Make: 2019 Weight: 6021 kg Rated current: 20 A Connected load: 12 kVA Disk laser: Trumpf 12-12-30-A32/11 with focusing optics (PFO) Laser measurement and determination: PRIMES FocusParamaterMontitor (FPM) Laser source: Trumpf TruDisk 5001 Welding fume extraction: HERDING Comp 1500-8/9 SB Year of extraction: 2018 Extraction volume: 2000 Bm³/h Included: HERDING Multicoater_MCI 55/1 dosing device for adding additives to the filtration process Enclosure cooling: RITTAL SK 3185830 The system was used to produce batteries.

description: In our warehouse in Knetzgau we currently have stored on 2.200qm more than 1000 used Siemens Control components. We are offering: priceworth materials without overhoul (EXW), projecting, turnkey projects incl electrics. Please let us know which components you need. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do ...

description: Fire protection closure for wallcrossing -Intumescent sealing system -No clearing of the closing area required if the conveyed material is non-combustible -No moving sealing elements -Small space requirements on the wall plate -System 1: 720 x 480 mm -System 2 : 440 x 480 mm All information without guarantee. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we ca ...

description: S7 control for full bottle transport. Partial range from filler to labeler. capacity range was approx. 55,000 beer bottles 0.33/0.5 l all information without guarantee Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking ...

description: It inspects the level after the filler with a gamma ray emitter. This system is working with a Krones Checkmat incl. push off band. Informations without guarantee. capacity: 5.000 - 50.000 Fl/h Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for o ...

Bread roll line Kövy Fortuna KM6 6-row - 6-row sliced roll line with magazine and head machine - with discharge - Fortuna KM6 Head Machine - Year of construction 2004

Hot foil stamping machine with original installation on the GTP model. In production.

MTA model TAE EVO M10 water chiller, cooling medium water with a temperature of max. 40°C, refrigerant R407c, refrigerant charge 0.800 kg, refrigerant working pressure max. 28.0 bar, temperature max. 64.5°C, electrics 230V/1Ph/50Hz, max. absorbtion 10.5A, installed power 2.20 kW, protection rating IP32, machine dimensions 550 x 600 x 800 mm (LxWxH), machine net weight approx. 74 kg.

For sale is a well-preserved pallet inspection system from the manufacturer BMS. Specifications: - Manufacturer: BMS - Type: Unicontrol P - YOC 2022 - All controls except for train control If you are interested, please inquire.

Manufacturer: unknown, Year of manufacture: 1998, Filter system overpressure: yes, Volume flow m³/h: approx. 5000, Hose diameter mm!: 220, Number of filter chambers: 1, Fans pcs.: 1, 2. Extraction fan kW: approx. 4.5 Kw, Mass Length 2400 X Width 1800 mm Height 3900 mm/ Valve door installed in soundproofed box, Year of construction :1998

Knut Schneideer Sewing and Special Machine Construction Screening plant Serial number 001 Immediate availability Location Germany City of Erfurt (on the Haarberg) Number of screens: 3

Frisch Spritzmatic Smartline Coating System Spraying System - Manufacturer: Frisch Vertriebs GmbH - Type: Smartline conveyor system - Egg spraying system - Compact conveyor system - Voltage: 230 volts - Power: 0.25 kW - Operating pressure: 8 bar - Year of construction 2010

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -

A Schuko filter unit with a Nestro centrifugal fan is sold. Schuko STA filter system Filter area 90sqm Number of filters 90 Filter length 2000mm Dimensions approx. H= 3.9m Length = 3m Depth 1.15m Nestro 7.5kw/380V Volume flow 7650 m3/h Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded.

Completely refurbished

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

AC 500 fixed - Low energy consumption due to pressure-free filter elements and energy-efficient blowers - Filtration stages for the separation of coolant mist - Filtration principle M - Use for emulsion mist - Direct attachment to the machine possible - Separation efficiency up to 99 - Extraction capacity 800 m3/h (470cfm) - Fan capacity 1950 m3 / 5 (1,147 cfm) - Energy consumption 0.6 kW - Voltage: 400V - Dimensions: (LxWxH): 500x500x590 mm - Weight: 48 KG Changes and errors in the technical data and information as well as prior sale reserved! Please note that this description has been automatically translated. We will be happy to provide you with further information. The information in this advertisement is non-binding. We recommend checking the details with the seller before making a purchase.

Lippelt Mini Rustica Guillotine Punch for easy and, above all, quick processing of: square rolls, grain rolls, rye rolls, etc. - With 2 cutting rollers - with seed sprinkling - with punch - 1.1 kW - Year of construction GUE 2015

2 emergency power systems with MTU diesel engine and Piller UPS system MTU 18V2000 Power each: 1100 kVA Year: 2004 Hours: 126 and 121 Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Generator: Piller DHH 102/80-5 Container 1: Excellent condition, like new! Used as a UPS backup power system, still connected to the grid. Container 2: Reserve, professionally preserved. Subject to prior sale - errors possible! Internal reference number: E-1004-95

ALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil sealing machine 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - Extra 4) Storage device for wrapped packages - Extra The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos

Key data: 900 mm, 600 mm, 370 mm

The compact laser gantries with laser scanner NSP-9060-xx stand for NanoSec laser processing systems that are based on high-quality fiber lasers or CO2 laser technologies. The laser wavelengths of 1064nm, or 10600nm, are suitable for marking all metals, plastics, organic materials, as well as glass. Portals and scan fields of different sizes can be configured with each other. The new system concept allows the scanners with their high precision and speed to be combined with the x,y,z axes of a gantry. Multiple feeds or large formats are processed with the highest precision and production speed.

Vitronic Barcode Scanner with framework and additional PC RA1970 Manufacturer: Vitronic Components: with Item framework, fully mounted Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Currently an error in the channel, as the connection to the other machine does not exist. But can be solved by technical support Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features:

Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Features:

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Metal sorting system for small scrap and bulk materials, metal recycling, ash recycling used Manufacturer: GEODUR with eddy current separator for non-ferrous metals Dimensions: approx. 10 x 2.5 x 3 m This is a larger semi-mobile sorting plant Formerly used to process ash, bottom ash / slag from waste heating plants / incinerators / smelting plants by means of this sorting plant in order to separate metals and other fractions from it Can also be used to sort / separate sand and stones. Metals were sorted by means of Überbangamnet. Non-ferrous metals by means of non-ferrous separators / eddy current separators This line also includes other plant components, overbelt magnet, sieve sorting machine and conveyor belts with steel structures We are in the process of setting up the line in such a way that you can see the entire circumference compared to this plant Search  ...

Key data: 71 m², 825 kg, 2640 mm

Clean Air Dust Extractor RL350 Extraction connection on the right Nominal volume 8,000m³/h H3 GS dust-tested Jet cleaning Chip container capacity 500l Electrics RL350 FU 11kW Extinguishing device powder extinguisher 12kg More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Dry Extraction Wall Spänex TAW compact 215 Paint mist extraction wall with dry separator Complete supply air system Hot water heating coil Spray chamber control with touchscreen 2 x 2.0 kW drive power 6000 m³/h volume flow Year of construction: 2011 From joinery liquidation / retirement in GOOD - CONDITION from the carpentry workshop

Specifications: Processes: washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50Hz+N+PE Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Payload, max.: 200 kg Washing tub: 900 l Rinsing tray: 900 l Oil separator: 200 l

Vacuum water degassing system Manufacturer : GEA/Füllpack Type: ONEX Capacity: 30,000 L/hour, 300 HL/hour Technical specifications : The facility is 2-stage Residual oxygen content

Payload: 1,300 kg Max. vacuum lifter: 4,000 x 2,000 mm Number of suction cups: 19 pcs. Dimensions LxWxH: 480 x 200 x 250 cm Weight: 1,400 kg

UV disinfection system Make WEDECO Type ME 450 Capacity 35 cbm/h Composed of: UV Reactor, Stainless Steel Housing Material 1.4301 Reactor chamber material: pure quartz Volume 25.0 l Flange connection DN 100, 1.4571, DIN 2576 Empty weight approx. 140 kg, dimensions: 380 mm width x 2215 mm high x 415 mm depth Water temperature 5 °C – 60 °C, operating pressure 10 bar, pressure loss approx. 0.01 bar Protection class IP 65 UV lamps Hg Low Pressure Spectrothermal Emitters Power 160 watts, quantity 10 pieces UV sensor Accuracy +- 10% Switchboard

Key data: 3000 m³/h, 7 kW

Filter capacity: 3000 m3/h Filter area: 52.5 m2 Filtering and suction of: -Smoke -Dust -Laser Motor power: 7.5 kW Country of origin: Germany Weight: 1100 kg

Roll wrapping and settling Trima BA1000 - Manufacturer: Trima Triebeser Maschinenbau GmbH - Type: BA 1000 - Year of construction: 2014 - Voltage: 400 Volt / 50Hz - Fuse: 16A - Power: 1.9 kW - Weight: 680kg - External dimensions approx. 220x105x215cm WxDxH

Single-shaft shredders Technical Specification: Hopper opening: 600 x 800 mm Hopper capacity: 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of the knives: concave / 40 x 40 mm, cutting turning crowns concave / 30 x 30 mm, scraper blade Screen perforation: 15/20 mm Lacquering: Frame in RAL 5010, Tricher in RAL 7016 (HoKuTech standard paint) Connected load: 400 V +/- 5 % / 50 Hz For material: chipboard, MDF/HDF, softwood/hardwood, OSB inclusive: - Control cabinet (Rittal) with 5 m cable - Electrical control (PLC Siemens) - Star triangle run-up - Rubber oscillating elements - E-rotor with knife pockets milled into the profile - Transmission limit switch - 1st row of knives - Hold-down device on the slide for long and large parts - Large 4 ...

High-performance Dry Mix Concrete Plant SUMAB S-2000 S – fully automatic. Features include 4 x 25 m³ aggregate hoppers, 2 m³ aggregate weighing system, 1,000 kg cement weighing system, 52 T cement silo, screw conveyors, water dosing unit, additive dosing, K2 Lite computer automation system. Compact design for container transport. Includes control cabin, air compressor, and basic spare parts set. Built with durable materials and designed for efficient, continuous operation. Ideal for high-volume production. Ready for immediate installation.

Compound system with 3 pcs. compressor Bitzer S6F-30.2Y with control box Wired for blast freezer or freezer. Displacement per compressor 101cbm/h Temperature range minus 40°C

Marking system Manufacturer: Röltgen Type 218 00000 Year of construction 2006

Compressor Pack Make: Grasso Model: 411 Year 2005 Freon Previously used for a 10 ton ice machine Does not include control panel

Bag Press/Tamping Machine Designed to compress a bag/product to squeeze air/product down With conveyor Approx 3 years old, excellent condition

Angle system – window machine Weinig Unicontrol Type: UC 5P Year of Make: 1992 with PLC control Operation on the machine Incl. window tool make GOLD IV 78 with and without rain rail Good, ready-to-use condition. Demonstration – trial run possible.

Manufacturer: Cognex Type: In-Sight 9912 IS9912M-373-50 (monocromn with RedLine) From stock liquidation Location: Stuttgart

A laser system with 1 loading station and two stations each is available. Welding fixtures: 4, laser power: 3.3kW, beam source: TruDisk 3302 disk laser, workpiece dimensions X/Y/Z: 300mm/100mm/100mm, material thickness: 1.5mm, welding speed: 5600mm/min, welding optics: Trumpf BEO D70, operating hours: approx. 70000h. Documentation available. On-site inspection is possible.