transfer system used for sale

FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...

Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Waffle Cup Making Machine There are 4 different machines available, for different cup dimensions. Model: BM-260 - Mocaccino Model: ВМ-200 - Latte/Cauccino Model: ВМ-120 - Americano Model: ВМ-80 - Espresso Steps for production: - Preparation of the dough for the waffle cups - Production of the wafer cups on a cup production line - Preparation of the chocolate mass (melting of the chocolate briquettes/drops and tempering) - Pour the chocolate into the cup and turn the cup over so that the chocolate residue runs out of the cup - Cooling of the cups of chocolate on the work tables - Packaging of finished products in bags Technical data: - Number of molds per matrix: 32 pieces - Volume cup : 80 / 120 / 200 / 260 ml - Capacity: 320 - 480 cups per hour - El. Power: 18 kW - Weight: 655 kg - Dimensions: (L х W х H): 1,080 x 800 x 1,440 mm

Fortuna Viereck Ciabatta - Bread roll system Type: TM 4-row with flour spreader with sprinkler with seed storage with turntable with Spüher Hourly output approx. 3800 pieces Stainless steel version on rolls 380V 50Hz

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request

Manual cleaning system for printing tools Type: HC-1000 Year of Make: 2020 good condition, fully functional, incl. stainless steel castors and various accessories (see photos) This revolutionary cleaning system is ideal for thorough and gentle cleaning of printing tools. Thanks to its well thought-out design and equipment with durable components, it meets the highest standards of efficiency and ease of use. Its detergent is non-volatile (VOC-free), fully recyclable and NEVER needs to be replaced thanks to the integrated recycling system. This saves time, reduces operating resources and disposal costs and also protects people and the environment. Features: - Completely solvent-free - Cleaning agent is recycled - No liquid waste - No explosion protection necessary - No suction necessary Equipment: - Flexible hose holder for precise work - Four sturdy stainless stee ...

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

CIP set - Moravek 5sa - Second Hand Moravek CIP 5SA designed to CIP and fully sanitises the keg filler and Moravek BC30 Beer carbonator with or without optional BF30 sterile filtration module. The Moravek CIP 5SA can also be used to CIP brewery conditioning, bright beer tanks and vessels up to 65HL (circa 2m internal diameter) when fitted with specified Alfa Laval spray ball cleaning heads as well as other ancillary brewery equipment Output flow adjustable range 500-5000 LPH Output pressure adjustable range 0-3 bar Capacity of tanks 2x250 litres Installed electric power max. 24kW Designed for cleaning BC30 Beer Carbonator, BF30 sterile filtration module, Can Pro 9/2 Filler/Seamer plus associated brewery storage tanks and vessels The unit is a mobile unit and can be used for CIP cleaning in other parts of the brewery as well. Measurements: Height: 1700mm approx. Length: ...

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

- According to layout bottle transporters - According to layout carton transporter - With central control

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Hygienio B1. N1 Steam Disinfection System The B1. N1 is ideal for outpatient clinics, doctors' offices, dental offices and smaller premises. Its compact size and unique features make it the perfect choice. If you are looking for a reliable and efficient disinfection solution without complicated handling, the Hygienio B1. N1 is for you. The ultimate, simplified disinfection system – designed for ease of use and handling. The B1. N1 does not have the electronic control unit and is therefore particularly easy and effortless to operate. Thanks to the manual and direct system status check, you have full control over the selection of the right application mode – whether disinfectant or steam. The liquid tanks are equipped with visual level indicators, so you can monitor the level at any time and prevent possible damage to the internal components. Mobility: 4 abrasion-resistant ...

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

see performance data on photo with data

Teledyne Isco CombiFlash Companion/TS The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any connection and Microsoft Windows® Explorer. It even notifies you via email once the separation is complete. The system's advanced automation and communication features give you the highest levels of productivity and peace of mind. This allows you to devote yourself to other tasks undisturbed while the cleanup is in progress. The touchscreen controller allows you to control the system locally on a clear screen. The optional solvent management module controls up to four solvents online and monitors their levels, so you're never left without solvents. Companion uses precision-packed RediSep® RF columns to extract more virgin material in less time than glass columns or other disposable columns. Columns from 4 g to 330 g can be ...

Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal mucosal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for the high-throughput isolation of nucleic acids (DNA/RNA). It uses a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect the bound particles and bring them back into suspension. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24 or 96 samples simultaneously, depending on the rod head used. Sample volume: It offers high flexibility for volumes from 10 μL to 10 ml. Processing time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min ...

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

LaserTec FullSet Monolith 265 industrial energy storage system was built by LaserTec S.A. in Poland in 2023. This highly advanced machine is a key component of a company’s strategic energy management. It allows the storage and management of electricity at the most cost-effective times, bringing tangible savings to the company. The system also plays an important role in stabilising and reducing overloads on the local network, which is particularly important in industrial plants where the continuity of production processes is critical to maintaining operational fluidity. The FullSet Monolith 265.50h energy storage system accumulates electricity from both photovoltaic installations and the grid. The battery modules made of NMC lithium-ion cells are characterised by timeless durability. Off-grid operation, on the other hand, provides emergency power in the event of power cuts. This solu ...

CIP system 3x15HL, new

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

CIP system 2x10HL, new

CIP system 3x10HL, new

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Machine light, machine light, work area light, system light, compact light -Manufacturer: Rittal, LED system light SZ 4140.840 -Price: per piece -Numer: 3 pieces -Dimensions: 525/50/H30 mm -Weight: 0.4 kg/piece

Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer.

0: 4000,5000 mm Working height: 120 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 3.700mm, 5.100mm, 6.100mm mm Working height: 160 mm 0: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Hazard lights, night markings, flashing lights, day/night markings -Reetec: Control system for hazard lights in wind turbines -Type: W, red slimline THSLW -Dimensions: 210/255/H70 mm -Weight: 3.5 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

HausER composite system with 4 compressors Bitzer, 3 pcs. 6J-22.2Y and 1 pcs. 4G-20.2Y with control box, all wired The composite system can be used for plus as well as for minus.

Paint roller machine, roller coating machine, powder coating system -Drying and exhaust air: used for slat/blind production -Dimensions: 2950/800/H1920 mm -Weight: 484 kg

exhaust filter system, exhaust filter system, exhaust filter, hot filter, industrial exhaust filter -Filter system: Manufacturer/type unfortunately unknown flange dimensions DN100 -Individual components: see photos -Dimensions: 2020/1630/H2490 mm / 1850/800/H800 mm -Total weight: 1292 kg

Bitzer double composite system with 7 compressors. 4 of them are 6H-25.2Y and 3 of them are 4G-20.2Y

Double composite system BITZER for plus and minus, consists of 5 compressors. Negative composite consists of 2 pcs. compressor 4DC-5.2Y-40S Plusverbund consists of 3 pcs. compressor 4GE-20Y-40P Including switch box

Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK

Pressure measuring device, flow measuring device, measuring and control technology, measuring device -imc: universal measuring device µ-MUSYCS -Voltage: 110 - 230 V AC/DC -Dimensions: 330/345/H145 mm -Weight: 6.4 kg

TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box